คุณยังไม่มีสินค้าในรถเข็น
Catalyst 9105AX Access Points
Product specifications
|
Item |
Specification |
|||||||||
|
Part numbers |
Cisco Catalyst 9105AX Access point: Indoor environments, with internal antennas Cisco Catalyst 9105AX access point: Wall Plate, with internal antennas ● C9105AXW-S: Cisco Catalyst 9105 Series
Cisco Catalyst 9105AX Teleworker access point: Indoor environments, with internal antennas ● C9105AXIT-S: Cisco Catalyst 9105 Series
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists. |
|||||||||
|
Software |
Catalyst 9105 AXI ● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
● Cisco IOS ® XE Software Release 17.3.1, or later
Catalyst 9105AXW ● Cisco Unified Wireless Network Software Release 8.10MR3 or later
● Cisco IOS ® XE Software Release 17.3.1 or later
|
|||||||||
|
Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
|
|||||||||
|
802.11n version 2.0 (and related) capabilities |
● 2x2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
|||||||||
|
802.11ac |
● 2x2 downlink MU-MIMO with two spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80- MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
|
|||||||||
|
802.11ax |
● 2x2 uplink/downlink MU-MIMO with two spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80- channels
● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
|
|||||||||
|
Integrated antenna |
Catalyst 9105AXW ● 2.4 GHz: Peak gain 3 dBi, internal antenna
● 5 GHz: Peak gain 5 dBi, internal antenna
Catalyst 9105AXI ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
|
|||||||||
|
Interfaces |
Catalyst 9105AXW ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
● Management console port (RJ-45)
● USB 2.0 at 4.5W
● Passthru Port
Catalyst 9105AXI ● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
● Management console port (RJ-45)
|
|||||||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
|||||||||
|
Dimensions |
● Access point (without mounting brackets):
◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) ◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) |
|||||||||
|
Weight |
Cisco Catalyst 9105AXW ● 0.8 lb. (373.2g)
Cisco Catalyst 9105AXI ● 0.7 lb. (329.5g)
|
|||||||||
|
Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
|
|||||||||
|
Catalyst 9105AXI |
||||||||||
|
PoE power |
2.4-GHz radio |
5-GHz radio |
Link speed |
|||||||
|
802.3af (PoE) |
2x2 |
2x2 |
1G |
|||||||
|
Catalyst 9105AXW |
||||||||||
|
PoE power |
2.4-GHz radio |
5-GHz radio |
Link speed |
USB |
LAN1 PSE |
|||||
|
802.3af (PoE) |
2x2 |
2x2 |
2.5G mGig |
Disabled |
Disabled |
|||||
|
802.3at (PoE+) |
2x2 |
2x2 |
2.5G mGig |
Either USB or LAN1 PSE enabled. |
||||||
|
Environmental |
Cisco Catalyst 9105AXW ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft (3000 m)
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled. Cisco Catalyst 9105AXI ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.(3000 m)
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio. |
|||||||||
|
Available transmit power settings (Max/Min) |
● 2.4 GHz
◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW) |
● 5 GHz
◦ 20 dBm (100 mW) ◦ -7 dBm (0.2 mW) |
||||||||
|
Regulatory domains |
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country For information about regulatory domain support |
|||||||||
There are no products matching the selection
This is a custom CMS block displayed if category is empty.You can replace it with any custom content.
About Thaiitstore.com
