Catalyst 9130AX Access Point

Cisco Catalyst 9130AXI Access Point

Item

Specification

Part numbers

Cisco Catalyst 9130AXI Access Point: Indoor environments, with internal antennas

  C9130AXI-S: Cisco Catalyst 9130AX Series

Cisco Catalyst 9130AXE Access point: Challenging indoor environments, with external antennas

  C9130AXE-S: Cisco Catalyst 9130AX Series

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Software

Catalyst 9130AXI

  Cisco Unified Wireless Network Software Release 8.10.x or later
  Cisco IOS ® XE Software Release 16.12.1 with AP Device Pack, or later

Catalyst 9130AXE

  Cisco Unified Wireless Network Software Release 8.10 MR1 or later
  Cisco IOS XE Software Release 17.1.1 or later

Supported wireless LAN controllers

  Cisco Catalyst 9800 Series Wireless Controllers
  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

  4x4 MIMO with four spatial streams
  Maximal Ratio Combining (MRC)
  802.11n and 802.11a/g
  20- and 40-MHz channels
  PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11ac

  8x8 downlink MU-MIMO with eight spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, 80-, and 160-MHz channels
  PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  Wi-Fi Protected Access (WPA) 3 support

802.11ax

  8x8 uplink/downlink MU-MIMO with eight spatial streams
  Uplink/downlink OFDMA
  TWT
  BSS coloring
  MRC
  802.11ax beamforming
  20-, 40-, 80-, and 160-MHz channels
  PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  WPA3 support

Integrated antenna

  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth

External antenna with smart antenna connector

  The Cisco Catalyst 9130AXE access point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)
  Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
  Supports Self-Identifiable Antennas (SIA) on the smart antenna connector
  Smart antenna connector is a compact multi-RF connector with 8-DART interface
  Requires the AIR-CAB-002-D8-R= 2-fppt smart antenna connector when used with antennas with a RP-TNC connector
  Requires the AIR-CAB-003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna
  For more details, see the Catalyst 9130AX Series Getting Started Guide.

Interfaces

  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
  Management console port (RJ-45)
  USB 2.0 at 4.5W (enabled via future software)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

  Access point (without mounting brackets):

    C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)

    C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)

Weight

Cisco Catalyst 9130AXI

  3.2 lb. (1.45 kg)

Cisco Catalyst 9130AXE

  3.78 lb. (1.71 kg)

Input power requirements

  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE ®)
  Cisco power injector, AIR-PWRINJ6=
  802.3af PoE
  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

 

Catalyst 9130AXI

 

PoE power consumption

2.4-GHz radio

5-GHz radio

Link speed

USB

Link Layer Discovery Protocol (LLDP)

 

802.3at (PoE+)

4x4

8x8

5G

N

25.5W

 

802.3at (PoE+)

4x4

4x4

5G

Y

25.5W

 

802.3bt (Cisco UPOE)

4x4

8x8

5G

30.5W

 

Cisco Catalyst 9130AXE

 

PoE power consumption

2.4-GHz radio

5-GHz radio

Link speed

USB

LLDP

 

802.3at (PoE+)

4x4

8x8

5G

N

25.5W

 

802.3at (PoE+)

4x4

4x4

5G

25.5W

 

802.3bt (Cisco UPOE)

4x4

8x8

5G

30.5W

 

Cisco Catalyst 9130AXI and 9130AXE

 

PoE power consumption

2.4-GHz radio

5-GHz radio

Link speed

USB

LLDP

 

802.3af

PoE

1x1

1x1

1G

N

13.4W

Environmental

Cisco Catalyst 9130AXI

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
  Operating temperature: 32° to 122°F (0° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)
  Operating altitude test: 40˚C, 9843 ft (3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled.

Cisco Catalyst 9130AXE

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
  Operating temperature: -4° to 122°F (-20° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)
  Operating altitude test: 40˚C, 9843 ft.(3000 m)

System memory

  2048 MB DRAM
  1024 MB flash

Warranty

Limited lifetime hardware warranty

There are no products matching the selection

This is a custom CMS block displayed if category is empty.
You can replace it with any custom content.