Catalyst 9120AX Access Point

Cisco Catalyst 9120AXI

Item

Specification

Part numbers

Cisco Catalyst 9120AXI Access Point: Indoor environments, with internal antennas

  C9120AXI-S: Cisco Catalyst 9120AX Series

Cisco Catalyst 9120AXE Access Point: Indoor, challenging environments, with external antennas

  C9120AXE-S: Cisco Catalyst 9120AX Series

Cisco Catalyst 9120AXP Access Point: Indoor, professional installations

  C9120AXP-S: Cisco Catalyst 9120AX Series

Cisco Catalyst 9120AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller

  C9120AXI-EWC-S: Cisco Catalyst 9120AX Series

Cisco Catalyst 9120AXE Access Point: Indoor, challenging environments, with external antennas, with embedded wireless controller

  C9120AXE-EWC-S: Cisco Catalyst 9120AX Series

Cisco Catalyst 9120AXP Access Point: Indoor, professional installations, with embedded wireless controller

  C9120AXP-EWC-S: Cisco Catalyst 9120AX Series

 

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

Cisco Wireless LAN Services

Software

  Cisco Unified Wireless Network Software Release 8.9.x or later
  Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later

Supported wireless LAN controllers

  Cisco Catalyst 9800 Series Wireless Controllers
  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

  4x4 MIMO with four spatial streams
  Maximal Ratio Combining (MRC)
  802.11n and 802.11a/g beamforming
  20- and 40-MHz channels
  PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11ac

  4x4 downlink MU-MIMO with four spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, 80-, and 160-MHz channels
  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support

802.11ax

  4x4 downlink MU-MIMO with four spatial streams
  Uplink/downlink OFDMA
  TWT
  BSS coloring
  MRC
  802.11ax beamforming
  20-, 40-, 80-, and 160-MHz channels
  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support

Integrated antenna

Flexible radio (either on 2.4 GHz or on 5 GHz)

  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Dedicated 5-GHz radio

  5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately)

  Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
  Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna
  Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
  Supports Self-Identifiable Antennas (SIA) on one RP-TNC port
  For more details, see the Catalyst 9120AX Series Deployment Guide.

Smart antenna connector

  Available on the 9120AXE and 9120AXP only
  Compact multi-RF connector with DART interface
  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
  Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio

Interfaces

  1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
  Management console port (RJ-45)
  USB 2.0 @ 3.75W (enabled via future software)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Input power requirements

  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
  Cisco power injector, AIR-PWRINJ6=
  802.3af PoE
  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Power draw

802.3at (PoE+)

6 รายการ

ต่อหน้า

6 รายการ

ต่อหน้า