มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco | ATA191-K9 ATA 191 2-Port Analog Telephone Adapter

SKU: ATA191-K9
Band: Cisco
Type: Cisco Networks
Model:
Part Number: ATA191-K9
Features:
Detail:
ATA191-K9 | ATA 191 2-Port Analog Telephone Adapter
฿0.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
Cisco
รายละเอียดสินค้า
รายละเอียด

The Cisco ATA 191 Analog Telephone Adapter is designed to work with Cisco call control systems.

Features and Benefits

Feature

Benefit

Voice quality

Offers clear, natural-sounding voice quality via advanced preprocessing, high-performance echo cancellation, Voice Activity Detection (VAD), and Comfort Noise Generation (CNG)

Central provisioning and configuration

Eases deployment via a Cisco Unified Communications Manager central interface

Security

Provides a complete security solution for both media and signaling

Problem reporting (PRT)

Improves serviceability with a dedicated PRT button for problem reporting and log collection

IPv6

Enables an IPv4/IPv6 dual stack to help migration to IPv6

 

Platform Support

The Cisco ATA 191 Analog Telephone Adapter is compatible with Cisco call control systems.

Licensing

Phone licensing depends on the call control platform and its policies. For Cisco Unified Communications Manager, the Cisco ATA 191 Analog Telephone Adapter requires one Essential User Connect License (UCL) per port.

Product specifications

Feature

Specifications

Physical dimensions (H×W×D)

3.9 x 3.9 x 1 in. (100 × 100 × 28 mm)

Weight

4.7 oz (132.1 g)

Hardware

Interface: Two RJ11 FXS ports, one 10/100 Mbps RJ-45 Ethernet port, 
power button: reset and PRT

LED indicators: Power, Network, Phone 1, Phone 2, PRT

Wall mountable

Subscriber Line Interface Circuit (SLIC)

Ring voltage: 40 to 90 Vpk configurable

Ring frequency accuracy: 1%

Ring waveform: Trapezoidal or sinusoidal

Maximum ringer load: 3 Ringer Equivalence Numbers (RENs)

On-hook voltage (tip and ring): -46 to -56V

Off-hook current: 25mA +/-10%

Terminating impedance: 600 ohm resistive, 900 ohm resistive, or 220 ohm + 820 ohm

120 nF complex impedance

Frequency response: 300 to 3400 Hz

Return loss (600 ohm, 300 to 3400 Hz): up to 26 dB

Idle channel noise: <-65 dBm 0p

Longitudinal balance: 58 dB (typical)

Voice quality Mean Opinion Score (MOS): >4.0

Voice quality jitter: <150ms

Networking

MAC address

IPv4 only

IPv6 only

IPv4/IPv6 dual stack

Session Initiation Protocol (SIP)

Transmission Control Protocol (TCP)

User Datagram Protocol (UDP)

Real Time Protocol (RTP)

Real Time Control Protocol (RTCP)

HTTP

Secure HTTP (HTTPS)

Trivial File Transfer Protocol (TFTP)

Address Resolution Protocol (ARP)

DNS A and AAAA records

Dynamic Host Configuration Protocol (DHCP) client

Internet Control Message Protocol (ICMP)

Simple Network Time Protocol (SNTP)

Cisco Discovery Protocol (CDP)

Link Layer Discovery Protocol (LLDP)

Quality of Service (QoS)

IEEE 802.1p/Q (QoS and VLAN tagging)

Differentiated Services (DiffServ) / Type of Service (ToS)

Telephony

Call forwarding: No answer, busy, and all

Call hold and resume

Caller ID generation (name and number): Bellcore, BT, and European Telecommunications Standards Institute (ETSI)

Caller ID with name and number

Call pickup and group pickup

Call transfer

Call waiting

Conference

Configurable ring frequency

Country-specific tones and cadences

Disconnect tone

Distinctive ringing: Calling and called number

Forced Authorization Code (FAC)/Client Matter Code (CMC)

Failover and fall back

Flash hook timer

Hook flash event signaling

Hotline and warm line calling

Message Waiting Indicator (MWI) tones

Music on hold

Off-hook warning tone

Polarity control

Redial

Share lines

Speed dial

Tip and ring voltage adjustment setting

Visual Messaging Waiting Indicator (VMWI) using Frequency Shift Keying (FSK)

Audio

Codec: G.711 a-law, G.711 μ-law, G.729a, G.729ab

Full duplex audio

Echo cancellation

Voice activity detection

Silence suppression

Comfort noise generation

Adaptive jitter buffer

Frame loss concealment

Adjustable audio frames per packet

Call progress tone generation

Impedance and gain adjustment

Dynamic audio payload

Fax and modem

Real-time fax over IP via T.38 fax relay (Group 3)

Fax pass-through via G.711 (Group 3)

Fax tone detection and pass-through

Auto negotiation on transmission rate

Provisioning and management

Central configuration

Interactive Voice Response (IVR)

Automated provisioning and upgrading via HTTP and TFTP

SSH access

Nonintrusive, in-service upgrades

Report generation and event logging

Dedicate PRT button

Support RTP statistics

Syslog (multilevel granularity)

Dual image

Security

System reset to factory default

Password-protected administrator access authority

Provisioning, configuration, and authentication

HTTPS with factory-installed client certificate

Advanced Encryption Standard (AES) encryption

SIP over Transport Layer Security (TLS) 1.1 and 1.2

Secure (encrypted) calling using Secure RTP (sRTP)

Encrypted TFTP configuration files

Image authentication

Secure boot

Secure Shell (SSH)

Power

DC input voltage: 5V DC at 2.0A maximum

Power consumption: 5W

Switching type (100 to 240V) automatic

Power adapter: 100 to 240V and 50 to 60 Hz (26 to 34 VA) AC input, with 6-ft (1.8-m) cord

Reliability

Mean Time Between Failures (MTBF): 300,000 hours

Operating temperature: 32° to 104°F (0° to 40°C)

Nonoperating temperature: 14° to 140°F (-10° to 60°C)

Humidity: Operating 10% to 90%, noncondensing; nonoperating 10% to 95%, noncondensing

Compliance (regulatory)

CE markings per directives 2014/30/EU and 2014/35/EU

Compliance (safety)

UL 60950 Second Edition

CAN/CSA-C22.2 No. 60950 Second Edition

IEC 60950-1:2005 (Second Edition) + A1:2009 + A2:2013 and/or AS/NZS 60950.1:2015

Compliance (EMC)

AS/NZS CISPR 32:2015 Class B

CISPR 32: 2015 Class B

EN 55032: 2015 Class B

EN 61000-3-2: 2014 Class A

EN 61000-3-3: 2013

EN 55024:2010+A1: 2015

EN 61000-4-2: 2009

EN 61000-4-3: 2006+A1:2008+A2:2010

EN 61000-4-4: 2012

EN 61000-4-5: 2014

EN 61000-4-6: 2014+AC2015

EN 61000-4-8: 2010

EN 61000-4-11: 2004

FCC Part 15, Subpart B

ANSI C63.4-2014

ICES-003 Issue 6: 2016

ANSI C63.4-2014

VCCI-TECHNICAL REQUIREMENTS (VCCI-CISPR 32: 2016) /

CISPR 32: 2015 class B

 

ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท Cisco Networks
Model ไม่
License / Features ไม่
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco | ATA191-K9 ATA 191 2-Port Analog Telephone Adapter
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา