Radios |
2.4 GHz 802.11b/g/n/ax client access radio |
5 GHz 802.11a/n/ac/ax client access radio |
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio |
2.4 GHz Bluetoth Low Energy (BLE) radio with Beacon and BLE scanning support |
Concurrent operation of all four radios |
Supported frequency bands (country-specific restrictions apply): |
• 2.400-2.484 GHz |
• 5.170-5.250 GHz (UNII-1) |
• 5.250-5.330 GHz (UNII-2) |
• 5.490-5.730 GHz (UNII-2e) |
• 5.735-5.835 GHz (UNII-3) |
|
Antenna |
Internal omni antennas (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
|
802.11ax Compatible, 802.11ac Wave 2 and 802.11n Capabilities |
DL-OFDMA, TWT support |
4 x 4 multiple input, multiple output (MIMO) with four spatial streams |
SU-MIMO and DL MU-MIMO support |
Maximal ratio combining (MRC) and beamforming |
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2) |
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands |
Packet aggregation |
|
Power |
Power over Ethernet: 42.5-57 V (802.3at compliant) |
Alternative: 12 V DC input |
Power consumption: 18 W max |
Power over Ethernet injector and DC adapter sold separately |
|
Interfaces |
1x 1000/2.5G BASE-T Ethernet |
1x DC power connector (5.5 mm x 2.5 mm, center positive) |
|
Mounting |
All standard mounting hardware included |
Desktop, ceiling, and wall mount capable |
Ceiling tile rail (9/16, 15/16, or 1 1/2” flush or recessed rails), assorted cable junction boxes |
Bubble level on mounting cradle for accurate horizontal wall mounting |
|
Physical Security |
Two security screw options included |
13.5 mm long, 2.5 mm diameter, 5 mm head |
Kensington lock hard point |
Concealed mount plate with anti-tamper cable bay |
|
Environment |
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) |
Humidity: 5% to 95% |
|
Physical Dimensions |
12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), not including deskmount feet or |
mount plate |
Weight: 28.22 oz (800 g) |
|
Security |
Integrated Layer 7 firewall with mobile device policy management |
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal |
Flexible guest access with device isolation |
VLAN tagging (802.1Q) and tunneling with IPSec VPN |
PCI compliance reporting |
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X |
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM |
TKIP and AES encryption |
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration |
Cisco ISE integration for guest access and BYOD posturing |
|
Quality of Service |
Advanced Power Save (U-APSD) |
WMM Access Categories with DSCP and 802.1p support |
Layer 7 application traffic identification and shaping |
|
Mobility |
PMK, OKC, and 802.11r for fast Layer 2 roaming |
Distributed or centralized Layer 3 roaming |
|
Analytics |
Embedded location analytics reporting and device tracking |
Global L7 traffic analytics reporting per network, per device, and per application |
|
LED Indicators |
1 power/booting/firmware upgrade status |
|
Regulatory |
RoHS |
For additional country-specific regulatory information, please contact Meraki Sales |
|
Warranty |
Lifetime hardware warranty with advanced replacement included |
|
IEEE Standards |
802.11a |
802.11ac |
802.11ax Compatible |
802.11b |
802.11e |
802.11g |
802.11h |
802.11i |
802.11k |
802.11n |
802.11r |
802.11u and Hotspot 2.0 |
|
Safety Approvals |
CSA and CB 60950 & 62368 |
Conforms to UL 2043 (Plenum Rating) |
|
Radio Approvals |
Canada: FCC Part 15C, 15E, RSS-247 |
Europe: EN 300 328, EN 301 893 |
Australia/NZ: AS/NZS 4268 |
Mexico: IFT, NOM-208 |
Taiwan: NCC LP0002 |
For additional country-specific regulatory information, please contact Meraki Sales |
|
EMI Approvals (Class B) |
Canada: FCC Part 15B, ICES-003 |
Europe: EN 301 489-1-17, EN 55032, EN 55024 |
Australia/NZ: CISPR 22 |
Japan: VCCI |
|
Exposure Approvals |
Canada: FCC Part 2, RSS-102 |
Europe: EN 50385, EN 62311, EN 62479 |
Australia/NZ: AS/NZS 2772 |
|
|
Ordering Information |
MR45-HW: Meraki MR45 Cloud Managed 802.11ax Compatible AP |
MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU) |
MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector |
(XX = US/EU/UK/AU) |
MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector |
(XX = US/EU/UK/AU) |
Note: Meraki access point license required |