|
Hardware Features
|
|
Ergonomic design
|
● The phone offers an easy-to-use interface and provides a traditional telephony-like user experience.
|
|
Graphical display
|
● The 800 × 480, 24-bit color, 5-in. WVGA display provides scrollable access to calling features and text-based XML applications.
|
|
Handset
|
● The handset is a standard wideband-capable audio handset (connects through an RJ-9 port).
● The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended).
● The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can achieve Section 508 loudness requirements by using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant.
|
|
Speaker phone
|
● A full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free.For added security, the audible dual tone multifrequency (DTMF) tones are masked when the speakerphone mode is used.
|
|
Analog headset
|
● The analog headset jack is a standard wideband-capable RJ-9 audio port.
|
|
AUX port
|
● You can use an auxiliary port to support electronic hookswitch control with a third-party headset connected
to it.
|
|
USB
|
● A side USB port enhances the usability of call handling by enabling wired or wireless headsets, as well as provides up to 500-mA power output at 5V or 2.5W for smartphone charging.
|
|
Ethernet switch
|
● An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through a RJ-45 interface with single LAN connectivity for both the phone and a co-located PC.
● The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic.
|
|
Bluetooth
|
● Bluetooth 3.0 Enhanced Data Rate (EDR) Class 1 technology (up to 66-ft [20m] range) is supported.
● Hands-Free Profile (HFP) is supported for untethered headset connections and voice communications.
● Phone Book Access Profile (PBAP) is supported for phone book object exchange between devices.
|
|
Keys
|
● The phone has the following keys:
◦ Line keys
◦ Soft keys
◦ Back and release keys
◦ Four-way navigation and select keys
◦ Messaging, Application, and Directory keys
◦ Standard keypad
◦ Volume-control toggle key
◦ Speakerphone, headset, and mute keys
|
|
Backlit indicator
|
● The phone supports backlit indicators for the audio path keys (handset, headset, and speakerphone), select key, line keys, and message waiting.
|
|
Replaceable bezel
|
● The phone includes a black bezel; an optional silver bezel is also orderable separately.
|
|
Dual-position foot stand
|
● The display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone.
|
|
Wall-mountable
|
● You can install the phone on a wall using an optional wall-mount kit.
|
|
Key expansion module (KEM)
|
● The phone supports up to two KEMs to expand from 5- to 77-line buttons. You have the convenience of many speed dials or programmable features, or the necessity of following the activity of many lines.
|
|
Physical security
|
● The phone is compatible with the Kensington Security Slot (K-Slot) antitheft system.
|
|
Power Features
|
|
IEEE Power over Ethernet (PoE)
|
● IEEE Power over Ethernet class 3. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - Power over Ethernet (LLDP-PoE).
|
|
Cisco IP Phone Power Cube 4
|
● This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of the power cube 4 also requires the use of one of the corresponding AC country cords.
|
|
Call-Control Support
|
|
Cisco Unified Communications Manager
|
● 8.5.1 (Non-secured mode Only)
● 8.6.2
● 9.1.2
● 10.5.2
● 11.0 and later
|
|
Cisco Unified Communications Manager Express (Unified CME)
|
● 10.0 and later through fast track
|
|
Cisco Business Edition 6000 (BE 6000)
|
● 8.6.2
● 9.1.2
● 10.5.2
● 11.0 and later
|
|
Cisco Hosted Collaboration Solution (HCS)
|
● 8.6.2 and later (using supported UCM versions above)
|
About Thaiitstore.com