มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco IP Phone 8800 | CP-8821-EX-K9-BUN Wireless IP Phone 8821-EX, ATEX Class I Zone 2, Battery, Power Adapter

SKU: CP-8821-EX-K9-BUN
Band: Cisco
Type: IP Phone
Model: IP Phone 8800
Part Number: CP-8821-EX-K9-BUN
Features: Wire / Wireless Phone
Detail:
CP-8821-EX-K9-BUN | Wireless IP Phone 8821-EX, ATEX Class I Zone 2, Battery, Power Adapter
฿0.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
Cisco
รายละเอียดสินค้า
รายละเอียด

The Cisco® Wireless IP Phone 8821-EX is a ruggedized, resilient, and secure 802.11 wireless LAN handset that delivers cost-effective, on-premises, comprehensive Voice over Wireless LAN (VoWLAN) communications for the highly mobile in-campus worker.

Availability Planned Q4 CY 2019

The 8821-EX is specifically designed for workers whose roles are in more rigorous, industrial settings. Examples of ideal use cases include operations and engineering staff in manufacturing, customer service representatives in retail, service staff such as maids in hospitality, and workers on rigs in the oil and chemical industries.

The 8821-EX builds upon all of the features offered by the Cisco Wireless IP Phone 8821 and adds nonsparking support for temporary exposure within potentially combustible environments. It is certified for CSA Class I Division 2, as well as (pending) ATEX Zone 2 Group IIC. ATEX Zone 2 is defined as an area in which an explosive gas atmosphere is not likely to occur in normal operation and, if it does occur, is likely to do so only infrequently and will exist for a short period only (for example, less than 10 hours per year). Similarly, CSA Class I is a location where a quantity of flammable gas or vapor sufficient to produce an explosive or ignitable mixture may be present in the air. Division 2 is a location where a classified hazard does not normally exist but is possible under abnormal conditions. Zone 2 is an area in which an explosive gas atmosphere does not normally exist.

While the 8821-EX is sleek and lightweight, the design is hardened for users. It is Ingress Protection standard (IP67) rated for ordinary locations and is sealed for protection against dust, splash, and water. In addition, for use in hazardous locations, the phone has been certified to IP54. The device is also MIL-STD-810G tested, with a dozen drops onto concrete from heights of up to 5 feet (1.5m), to help ensure shock resistance and avoid breakage if dropped.

The 8821-EX enhances security and simplifies configuration management. Stronger encryption is supported for certificate management and policies enablement with the EX model’s support of Secure Hash Algorithm 2 (SHA-2). Simple Certificate Enrollment Protocol (SCEP) eases IT administration by enabling automatic certificate management on the device.

End users will enjoy a larger, higher-resolution color display (Figure 1) and a user experience that is common with Cisco IP Phone 8800 Series desk phones. In addition, roaming between access points within the campus will support more seamless voice communications with the 8821-EX’s support of Fast Transition (802.11r). This protocol was specifically designed for mobile Voice over IP (VoIP) communications devices within Wi-Fi networks. Bluetooth is supported for the user’s choice of third-party wireless headsets and adds freedom by untethering the user from the handset.

The 8821-EX supports Cisco and third-party XML applications such as push-to-talk.

A full suite of accessories, including desktop chargers, cases, holsters, and multicharger, are available from Cisco to support deployments. Consult the Cisco Wireless IP Phone 882x Series Accessory Guide options and details.

Cisco Wireless IP Phone 8821-EX

Figure 1.       

Cisco Wireless IP Phone 8821-EX

Features

The Cisco Wireless IP Phone 8821-EX (Figure 1) delivers all the capabilities of the Cisco Wireless IP Phone 8821 with the ruggedness and resiliency certification needed for deployment in environments such as chemical and manufacturing plants, utilities, and oil refineries.

Features include:

       ATEX Zone 2 Group IIC certification (pending)

       U.S. and Canada Class I Division 2 and Class I Zone 2 certification

       Industry-standard yellow styling offers fast recognition if an emergency occurs

       IEEE 802.11a/b/g/n/ac radio for VoWLAN communications support

       The large 2.4-inch (6 cm) color (240 x 320 pixels) display makes viewing easy

       IP67 rated for protection against dust, splash, and water

       Compliant with MIL-STD-810G standard for shock resistance

       Offers exceptional voice quality with High-Definition (HD) voice

       Built-in full-duplex speakerphone offers high-quality hands-free communications

       Supports third-party Bluetooth 3.0 headsets and a 3.5-mm headphone jack for added freedom

       Applications key provides direct access to XML applications such as push-to-talk and Lone Worker

       Battery life delivers up to 9.5 hours of talk time

       Enhanced encryption support for SHA-1 and SHA-2 signatures

       Fast, secure roaming using 802.11r and Cisco Centralized Key Management roaming

       Automatic certificate renewal – SCEP support

Features

Item

Description

Features

  Six line appearances
  Abbreviated dialing
  Adjustable ringing and volume levels
  Adjustable display brightness and timeout
  Audible and vibrating ringers
  Auto-answer
  Auto-detection of headset and auto-answer from headset
  Automatic keypad lock
  Callback
  Call forward
  Call history lists
  Call park
  Call pickup
  Call timer
  Call waiting
  Caller ID
  cBarge
  Corporate directory
  Conference
  Direct transfer
  Extension mobility service
  Fast-dial service
  Group call pickup
  Hold
  Hotkey for keypad lock, ring silent mode, and voicemail access
  Immediate divert
  Join
  Last-number redial – green key
  Malicious caller
  Message-waiting indicator
  Meet-me conference
  Multilevel Precedence and Preemption (MLPP)
  Music on hold
  Mute
  Network profiles (4)
  OPickUp
  Personal directory
  Predialing before sending
  Privacy
  Presence
  Quality Report Tool (QRT)
  Redial
  Ring tone per line appearance
  Service URL
  Shared line
  Time and date display
  Transfer
  Network hold
  Hospitality
  Support for mutual-authentication TLS
  Cisco Unified Communications Manager WLAN profiles
  +Dialing
  Application launch pad
  Busy Lamp Field (BLF)
  BLF pickup
  BLF speed dial
  Call forward notification
  Forced authorization and client matter codes
  Intercom
  Mobility
  Silent monitoring and recording
  Speed dial
  Voicemail
  Whisper coaching
  Ring setting – phone active (ring, ring once, beep, flash)
  Predictive search on new call

Buttons

  Power button
  Volume up/down
  Two soft-key buttons to access screen-based applications, features, and functions
  Green key (answer/send/redial) and red key (power/end call)
  Application button
  Mute
  Speakerphone
  Five-way navigation support
  Numeric keypad (0-9, *, & #)

Codecs

  G.711a, G.711u
  G.729a, G.729ab
  G.722
  Internet Low Bitrate Codec (iLBC) audio-compression codecs
  iSAC

LEDs

  Ring, message waiting, Wi-Fi status, and charging LEDs

Protocol

  Session Initiation Protocol (SIP)

Call control

  Cisco Unified Communications Manager: 9.1(2), 10.5(2), 11.0(1), and later
  Cisco Unified Survivable Remote Site Telephony (SRST): 10.5, 11.0, 11.5, 11.7, and later
  Cisco Unified Communications Manager Express: 10.5, 11.0, 11.5, 11.7(native support) and later
  Cisco Hosted Collaboration Solution (HCS): 9.x, 10.x, 11.x, and later

Security features

  Certificates
  Image authentication
  Device authentication
  File authentication
  Signaling authentication
  Secure Cisco Unified SRST
  Media encryption using Secure Real-Time Protocol (SRTP)
  Signaling encryption using Transport Layer Security (TLS) Protocol
  Certificate Authority Proxy Function (CAPF)
  Simple Certificate Enrollment Protocol (SCEP) support for certificates renewal
  Secure profiles
  Encrypted configuration files
  Cryptography is not enabled by default and may be enabled only through a cryptographically enabled Cisco Unified Communications Manager

Provisioning and management

  Configuration via Unified Communications Manager, SRST, and Unified Communications Manager Express administration interfaces
  Bulk provisioning support via desktop charger and USB to Ethernet dongle combination
  Web server for configuration and statistics
  Capability to disable local phone settings
  Quality of Service (QoS) reporting: Jitter, delay, dropped packets, and latency on a per-call basis
  Real Time Control Protocol (RTCP) support and monitoring
  Syslog

Configuration options

  Dynamic Host Configuration Protocol (DHCP) client or static configuration
  Support for online firmware upgrades using Trivial File Transfer Protocol (TFTP)
  Domain Name System (DNS)

Application framework

  XML (support push-to-talk, paging, and other 3 rd party applications)

User localization

Arabic, Bulgarian, Catalan, Chinese (Hong Kong), Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English (United Kingdom), English (United States), Estonian, Finnish, French (Canada), French (France), German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese (Brazil), Portuguese (Portugal), Romanian, Russian, Serbian, Slovak, Slovenian, Spanish (Spain), Spanish (Colombia), Swedish, Thai, and Turkish

Network localization

Argentina, Australia, Austria, Belgium, Brazil, Canada, China, Colombia, Cyprus, Czech Republic, Denmark, Egypt, Finland, France, Germany, Ghana, Greece, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Japan, Jordan, Kenya, Korea Republic, Lebanon, Luxembourg, Malaysia, Mexico, Nepal, Netherlands, New Zealand, Nigeria, Norway, Pakistan, Panama, Peru, Philippines, Poland, Portugal, Russian Federation, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, United Kingdom, United States, Venezuela, and Zimbabwe

Wireless Characteristics

Item

Specifications

Protocols

  IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac

Frequency bands and operating channels

  2.412 to 2.472 GHz (channels 1 to 13)
  5.180 to 5.240 GHz (channels 36 to 48)
  5.260 to 5.320 GHz (channels 52 to 64)
  5.500 to 5.700 GHz (channels 100 to 140)
  5.745 to 5.825 GHz (channels 149 to 165)
  IEEE 802.11d can be used to identify available channels

Nonoverlapping channels

  2.4 GHz (20-MHz channels): up to 3 channels
  5 GHz (20-MHz channels): up to 24 channels
  5 GHz (40-MHz channels): up to 9 channels
  5 GHz (80-MHz channels): up to 4 channels

Operating modes

  Auto (preference to 5 GHz)
  2.4 GHz only
  5 GHz only

Data rates

  802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  802.11b: 1, 2, 5.5, and 11 Mbps
  802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  802.11n: HT MCS 0, MCS 1, MCS 2, MCS 3, MCS 4, MCS 5, MCS 6, and MCS 7
  802.11ac: VHT MCS 0, MCS 1, MCS 2, MCS 3, MCS 4, MCS 5, MCS 6, MCS 7, MCS 8, and MCS 9 (MCS 9 available with VHT40 and VHT80 only)

2.4-GHz receiver sensitivity

IEEE 802.11b:

  1 Mbps: -98 dBm
  2 Mbps: -96 dBm
  5.5 Mbps: -93 dBm
  11 Mbps: -91 dBm

IEEE 802.11g:

  6 Mbps: -95 dBm
  9 Mbps: -94 dBm
  12 Mbps: -93 dBm
  18 Mbps: -90 dBm
  24 Mbps: -87 dBm
  36 Mbps: -84 dBm
  48 Mbps: -79 dBm
  54 Mbps: -77 dBm

IEEE 802.11n HT20:

  MCS 0: -95 dBm
  MCS 1: -92 dBm
  MCS 2: -90 dBm
  MCS 3: -87 dBm
  MCS 4: -83 dBm
  MCS 5: -78 dBm
  MCS 6: -77 dBm
  MCS 7: -75 dBm

5-GHz receiver sensitivity

IEEE 802.11a:

  6 Mbps: -94 dBm
  9 Mbps: -93 dBm
  12 Mbps: -92 dBm
  18 Mbps: -89 dBm
  24 Mbps: -86 dBm
  36 Mbps: -83 dBm
  48 Mbps: -78 dBm
  54 Mbps: -76 dBm

IEEE 802.11n HT20:

  MCS 0: -94 dBm
  MCS 1: -91 dBm
  MCS 2: -89 dBm
  MCS 3: -86 dBm
  MCS 4: -82 dBm
  MCS 5: -77 dBm
  MCS 6: -76 dBm
  MCS 7: -74 dBm

IEEE 802.11n HT40:

  MCS 0: -91 dBm
  MCS 1: -88 dBm
  MCS 2: -86 dBm
  MCS 3: -83 dBm
  MCS 4: -79 dBm
  MCS 5: -75 dBm
  MCS 6: -73 dBm
  MCS 7: -72 dBm

 

IEEE 802.11ac VHT20:

  MCS 0: -93 dBm
  MCS 1: -90 dBm
  MCS 2: -87 dBm
  MCS 3: -84 dBm
  MCS 4: -81 dBm
  MCS 5: -76 dBm
  MCS 6: -75 dBm
  MCS 7: -74 dBm
  MCS 8: -70 dBm

IEEE 802.11ac VHT40:

  MCS 0: -90 dBm
  MCS 1: -87 dBm
  MCS 2: -85 dBm
  MCS 3: -82 dBm
  MCS 4: -79 dBm
  MCS 5: -73 dBm
  MCS 6: -72 dBm
  MCS 7: -72 dBm
  MCS 8: -67 dBm
  MCS 9: -66 dBm

IEEE 802.11ac VHT80:

  MCS 0: -87 dBm
  MCS 1: -83 dBm
  MCS 2: -81 dBm
  MCS 3: -78 dBm
  MCS 4: -75 dBm
  MCS 5: -73 dBm
  MCS 6: -68 dBm
  MCS 7: -68 dBm
  MCS 8: -64 dBm
  MCS 9: -62 dBm

Transmitter output power

2.4 GHz:

  802.11b: up to 17 dBm
  802.11g: up to 14 dBm
  802.11n HT20: up to 13 dBm

5 GHz:

  802.11a: up to 14 dBm
  802.11n HT20: up to 13 dBm
  802.11n HT40: up to 13 dBm
  802.11ac VHT20: up to 12 dBm
  802.11ac VHT40: up to 12 dBm
  802.11ac VHT80: up to 12 dBm

Antenna

  2.4 GHz: 2.4 dBi peak gain
  5 GHz: 3.0 dBi peak gain

Access point support

  Cisco unified access points
  Minimum: 8.0.121.0
  Cisco autonomous access points
  Minimum: 12.4(21a)JY
  Cisco Meraki ® access points

Note: Check deployment guide for more details around access point support and listing.

Wireless security

Authentication:

  Wi-Fi Protected Access (WPA) versions 1 and 2 Personal and Enterprise
  Extensible Authentication Protocol – Flexible Authentication via Secure Tunneling (EAP-FAST)
  Protected Extensible Authentication Protocol – Generic Token Card (PEAP-GTC)
  Protected Extensible Authentication Protocol – Microsoft Challenge Handshake Authentication Protocol Version 2 (PEAP-MSCHAPv2)
  Extensible Authentication Protocol – Transport Layer Security (EAP-TLS)

Encryption:

  40-bit and 128-bit static Wired Equivalent Privacy (WEP)
  Temporal Key Integrity Protocol (TKIP) and Message Integrity Check (MIC)
  Advanced Encryption Standard (AES)

Note: The access point must support AES as TKIP can only be used as the broadcast/multicast cipher.

Fast secure roaming

  802.11r (FT)
  Cisco Centralized Key Management (CCKM)

Signature types

  Secure Hash Algorithm 1 (SHA-1) and Secure Hash Algorithm 2 (SHA-2)

Bit key types

  1024, 2048, and 4096 bit keys

QoS

  IEEE 802.11e and Wi-Fi Multimedia (WMM)
  Traffic Specification (TSPEC)
  Traffic Classification (TCLAS)
  Enhanced Distributed Channel Access (EDCA)
  QoS Basic Service Set (QBSS)

Specifications

Item

Specifications

Display

  2.4-in. (6-cm) color display with 240 x 320 pixel resolution

Dimensions (HxWxD)

  5.2 x 2.2 x 0.7 in. (13.2 x 5.6 x 1.7 cm)

Weight

  Device 4.4 oz (126 g), battery 1.3 oz (37 g), total = 5.7 oz (163 g)

Battery

  Up to 9.5 hours of voice calling; up to 45 hours (continuous scan) or up to 145 hours (auto scan) standby
  Rechargeable Lithium ion 4.35V, 2060mAh smart battery (minimal capacity 3.8V, 2000mAh)

Note: For voice calling, battery hours are calculated by placing a call and measuring the time it takes for the battery to completely drain. Actual battery hours may vary depending on display and keypad activity, messaging from XSI application, roaming events and scan mode, and use of a Bluetooth headset. Under normal usage when guidelines for battery in the deployment guide are followed, battery hours should cover a typical work shift of eight hours.

Input power

  Phone: 100 to 240 VAC, ~0.2A, and 50 to 60 Hz
  AC adapters (by geographical region)

Operating temperature

  Device: 14° to 122°F (-10° to 50°C)
  Battery: -4° to 140°F (-20° to 60°C)

Storage temperature

  Device: -22° to 140°F (-30° to 60°C)
  Battery: -4° to 113°F (-20° to 45°C)

Relative humidity

  10% to 95% (noncondensing)

Vibration

  1.5 Grms maximum, 0.1 in. (2.5 mm) double amplitude at 0.887 octaves per minute from 5-500-5 Hz sweep, and 10-minute dwell on three major peaks in each of the three major mutually perpendicular axes

Thermal shock

  -22°F (-30°C) 24 hours; 158°F (70°C) 24 hours

Altitude

  Certified for operation: 0 to 6500 ft. (0 to 2 km)

Endurance

  Ingress Protection IP67
  MIL-STD-810G Drop and Vibration procedures

Drop specs

  Withstand multiple drops of 5 feet (1.5m) on to concrete. 12 drops (6 faces, 4 edges, face and bottom)

Headset

  Wireless: Bluetooth SW 3.0 HW 4.0
  Wired: 3.5 mm stereo headphone/microphone jack

Connector

  Magnetic USB 2.0 On The Go (OTG) connector

Certification and Compliance

Item

Specifications

Safety

  UL 60950-1
  CAN/CSA 60950-1
  EN 60950-1
  IEC 60950-1
  AS/NZS 60950.1
  IEC 60529 (IP 67)
  ATEX Zone 2 Group IIC (pending)
  US/Canada CSA Class I Division 2
  US/Canada CSA Class I Zone 2
  ANSI/ISA 12.12.01 Class I Division 2, Groups A, B, C, and D
  CAN/CSA C22.2 No.213
  EN 60079-0
  EN 60079-7

Electromagnetic Compatibility and Electromagnetic Interference (EMC/EMI)

  47 CFR Part 15 Class B
  ICES-003 Class B
  EN 55022 Class B
  AS/NZS CISPR 22 Class B
  CISPR 22 Class B
  VCCI Class B
  EN 61000-3-2
  EN 61000-3-3
  KN 22 Class B
  EN 55024
  EN 50082-1
  EN 61000-6-1
  EN 61000-6-3
  EN 300 386
  EN 60601-1-2
  KN Immunity Series

Telecom

  FCC Part 68 (CFR) (HAC)
  NZ PTC 220 DR
  AS/ACIF S004 and AS/ACIF S040 (Australia)
  TIA 810-B and TIA 920-A
  Canada-CS-03-HAC

Radio

  USA: FCC Part 15.247 (2.4 GHz), FCC Part 15.407 (5 GHz), and FCC Part 2
  Canada: RSS-210
  Japan: ARIB STD-T66 (2.4 GHz), ARIB STD-T70, and T71 (4.9/5 GHz)
  ETSI: EN 300.328 (2.4 GHz) and EN 301.893 (5 GHz)
  Australia and New Zealand: AS/NZS 4268
  Singapore: IDA TS SRD
  Hong Kong: HKTA1039

RF exposure

  OET-65C (01-01)
  ANSI C95.1 (91)
  RSS-102
  ACA Radio Communications (Electromagnetic Radiation - Human Exposure) Standard 2003
  EN 50360
  EN 301 489-1
  EN 301 489-17

Product Ordering Information

Item

Specifications

CP-8821-EX-K9-BUN

Cisco Wireless IP Phone 8821-EX World mode, battery, power cord, power adapter, and country clip

CP-8821-EX-K9=

Cisco Wireless IP Phone 8821-EX World mode device ONLY

CP-BATT-8821=

Cisco Wireless 8821 Battery ONLY

CP-PWR-8821-NA=

Cisco Wireless 8821 Power Supply for North America, includes power cord and power adapter

CP-PWR-8821-AR=

Cisco Wireless 8821 Power Supply for Argentina, includes power cord, power adapter, and country clip

CP-PWR-8821-AU=

Cisco Wireless 8821 Power Supply for Australia, includes power cord, power adapter, and country clip

CP-PWR-8821-BZ=

Cisco Wireless 8821 Power Supply for Brazil, includes power cord, power adapter, and country clip

CP-PWR-8821-CE=

Cisco Wireless 8821 Power Supply for Europe, includes power cord, power adapter, and country clip

CP-PWR-8821-IND=

Cisco Wireless 8821 Power Supply for India, includes power cord, power adapter, and country clip

CP-PWR-8821-KR=

Cisco Wireless 8821 Power Supply for Korea, includes power cord, power adapter, and country clip

CP-PWR-8821-JP=

Cisco Wireless 8821 Power Supply for Japan, includes power cord, power adapter, and country clip

CP-PWR-8821-SW=

Cisco Wireless 8821 Power Supply for Switzerland, includes power cord, power adapter, and country clip

CP-PWR-8821-UK=

Cisco Wireless 8821 Power Supply for UK, includes power cord, power adapter, and country clip

Note:     For information about the desktop charger, multichargers, and carrying cases, refer to the Cisco Wireless IP Phone 882x Series Accessory Guide.

Warranty

Cisco IP phones are covered by a Cisco standard 1-year replacement warranty. A Cisco Smart Net Total Care optional service agreement is available for the Cisco Wireless IP Phone 8821-EX, desktop charger, and multicharger only, not for other accessories, such as batteries and carrying cases. The 8821-EX battery has only a 90-day warranty.

ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท IP Phone
Model IP Phone 8800
License / Features Wire / Wireless Phone
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco IP Phone 8800 | CP-8821-EX-K9-BUN Wireless IP Phone 8821-EX, ATEX Class I Zone 2, Battery, Power Adapter
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา