| Radios |
| 2.4 GHz 802.11b/g/n/ax client access radio |
| 5 GHz 802.11a/n/ac/ax client access radio |
| 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio |
| 2.4 GHz Bluetoth Low Energy (BLE) radio with Beacon and BLE scanning support |
| Concurrent operation of all four radios |
| Supported frequency bands (country-specific restrictions apply): |
| • 2.400-2.484 GHz |
| • 5.170-5.250 GHz (UNII-1) |
| • 5.250-5.330 GHz (UNII-2) |
| • 5.490-5.730 GHz (UNII-2e) |
| • 5.735-5.835 GHz (UNII-3) |
|
| Antenna |
| Integrated omni-directional antennas (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
|
| 802.11ax Compatible, 802.11ac Wave 2 and 802.11n Capabilities |
| DL-OFDMA, TWT support |
| 8 x 8 multiple input, multiple output (MIMO) with eight spatial streams on 5GHz |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz |
| SU-MIMO and DL MU-MIMO support |
| Maximal ratio combining (MRC) and beamforming |
| 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2) |
| Up to 1024-QAM on both 2.4 GHz & 5 GHz bands |
| Packet aggregation |
|
| Power |
| Power over Ethernet: 42.5-57 V (802.3at compliant) |
| Alternative: 12 V DC input |
| Power consumption: 22 W max |
| Power over Ethernet injector and DC adapter sold separately |
|
| Interfaces |
| 1x 1000/2.5G/5G BASE-T Ethernet |
| 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
|
| Mounting |
| All standard mounting hardware included |
| Desktop, ceiling, and wall mount capable |
| Ceiling tile rail (9/16, 15/16, or 1 1/2” flush or recessed rails), assorted cable junction boxes |
| Bubble level on mounting cradle for accurate horizontal wall mounting |
|
| Physical Security |
| Two security screw options included |
| 13.5 mm long, 2.5 mm diameter, 5 mm head |
| Kensington lock hard point |
| Concealed mount plate with anti-tamper cable bay |
|
| Environment |
| Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) |
| Humidity: 5% to 95% |
|
| Physical Dimensions |
| 12.83” x 5.54” x 1.76” (32.6 cm x 14.08 cm x 4.47 cm), not including deskmount feet or |
| mount plate |
| Weight: 35.27 oz (1 kg) |
|
| Security |
| Integrated Layer 7 firewall with mobile device policy management |
| Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal |
| Flexible guest access with device isolation |
| VLAN tagging (802.1Q) and tunneling with IPSec VPN |
| PCI compliance reporting |
| WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X |
| EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM |
| TKIP and AES encryption |
| Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration |
| Cisco ISE integration for guest access and BYOD posturing |
|
| Quality of Service |
| Advanced Power Save (U-APSD) |
| WMM Access Categories with DSCP and 802.1p support |
| Layer 7 application traffic identification and shaping |
|
| Mobility |
| PMK, OKC, and 802.11r for fast Layer 2 roaming |
| Distributed or centralized Layer 3 roaming |
|
| Analytics |
| Embedded location analytics reporting and device tracking |
| Global L7 traffic analytics reporting per network, per device, and per application |
|
| LED Indicators |
| 1 power/booting/firmware upgrade status |
|
| Regulatory |
| RoHS |
| For additional country-specific regulatory information, please contact Meraki Sales |
|
| Warranty |
| Lifetime hardware warranty with advanced replacement included |
|
| IEEE Standards |
| 802.11a |
| 802.11ac |
| 802.11ax Compatible |
| 802.11b |
| 802.11e |
| 802.11g |
| 802.11h |
| 802.11i |
| 802.11k |
| 802.11n |
| 802.11r |
| 802.11u and Hotspot 2.0 |
|
| Safety Approvals |
| CSA and CB 60950 & 62368 |
| Conforms to UL 2043 (Plenum Rating) |
|
| Radio Approvals |
| Canada: FCC Part 15C, 15E, RSS-247 |
| Europe: EN 300 328, EN 301 893 |
| Australia/NZ: AS/NZS 4268 |
| Mexico: IFT, NOM-208 |
| Taiwan: NCC LP0002 |
| For additional country-specific regulatory information, please contact Meraki Sales |
|
| EMI Approvals (Class B) |
| Canada: FCC Part 15B, ICES-003 |
| Europe: EN 301 489-1-17, EN 55032, EN 55024 |
| Australia/NZ: CISPR 22 |
| Japan: VCCI |
|
| Exposure Approvals |
| Canada: FCC Part 2, RSS-102 |
| Europe: EN 50385, EN 62311, EN 62479 |
| Australia/NZ: AS/NZS 2772 |
|
|
| Ordering Information |
| MR55-HW: Meraki MR55 Cloud Managed 802.11ax Compatible AP |
| MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU) |
| MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector |
| (XX = US/EU/UK/AU) |
| Note: Meraki access point license required |
About Thaiitstore.com