มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco Catalyst 1000 | C1000-8P-2G-L 8x 10/100/1000 Ethernet PoE+ ports and 67W PoE budget, 2x 1G SFP and RJ-45 combo uplinks

SKU: C1000-8P-2G-L
Band: Cisco
Type: Switch / Hub
Model: Catalyst 1000
Part Number: C1000-8P-2G-L
Features: LAN Lite
Detail:
Cisco 8x 10/100/1000 Ethernet PoE+ ports and 67W PoE budget, 2x 1G SFP and RJ-45 combo uplinks
฿11,100.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.

* ฟิลด์ที่จำเป็น

Cisco
รายละเอียดสินค้า
รายละเอียด

Product overview

Cisco® Catalyst® 1000 Series Switches are fixed managed Gigabit Ethernet and Fast Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco® Catalyst® 1000 operate on Cisco IOS® Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.

Product highlights

Cisco Catalyst 1000 Series Switches feature:

      8, 16, 24, or 48 Gigabit Ethernet and 24, 48 port Fast Ethernet data or PoE+ ports with line-rate forwarding

      2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks (8 Port models only) or 4 fixed 10 Gigabit Ethernet Enhanced SFP (SFP+) uplinks on the Gigabit Ethernet models and 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) and 2 RJ 45 Combo uplinks on the Fast Ethernet models

      Perpetual PoE+ support with a power budget of up to 740W

      CLI and/or intuitive web UI manageability options

      Network monitoring through sampled flow (sFlow)

      Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard

      Compact fanless models available with a depth of less than 13 inches (33 cm)

      Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console acces

      Reliability with a higher Mean Time Between Failures (MTBF) and an Enhanced Limited Lifetime Warranty support (E-LLW)

Switch models and configurations

Product ID*

Gigabit Ethernet / FE ports

Uplink interfaces

PoE+power budget

Fanless

Dimensions
(WxDxH in inches)

Weight (kg)

C1000-8T-2G-L

8 10/100/1000 RJ45 Data

2 SFP/ RJ-45 combo

Y

10.56 x 7.28 x 1.73

1.80

C1000-8T-E-2G-L

8 10/100/1000 RJ45 Data

2 SFP/ RJ-45 combo

Y

10.56 x 7.28 x 1.73

1.55

C1000-8P-2G-L

8 10/100/1000 RJ45 PoE+

2 SFP/ RJ-45 combo

67W

Y

10.56 x 12.73 x 1.73

1.55

C1000-8P-E-2G-L

8 10/100/1000 RJ45 PoE+

2 SFP/ RJ-45 combo

67W

Y

10.56 x 7.28 x 1.73

1.55

C1000-8FP-2G-L

8 10/100/1000 RJ45 PoE+

2 SFP/ RJ-45 combo

120W

Y

10.56 x 12.73 x 1.73

2.70

C1000-8FP-E-2G-L

8 10/100/1000 RJ45 PoE+

2 SFP/ RJ-45 combo

120W

Y

10.56 x 7.28 x 1.73

2.70

C1000-16T-2G-L

16 10/100/1000 RJ45 Data

2 SFP

Y

10.56 x 10.69 x 1.73

1.78

C1000-16T-E-2G-L

16 10/100/1000 RJ45 Data

2 SFP

-

Y

10.56 x 8.26x 1.73

1.42

C1000-16P-2G-L

16 10/100/1000 RJ45 PoE+

2 SFP

120W

Y

10.56 x 11.69 x 1.73

2.38

C1000-16P-E-2G-L

16 10/100/1000 RJ45 PoE+

2 SFP

120W

Y

10.56 x 8.26x 1.73

1.42

C1000-16FP-2G-L

16 10/100/1000 RJ45 PoE+

2 SFP

240W

Y

10.56 x 12.14 x 1.73

2.49

C1000-24T-4G-L

24 10/100/1000 RJ45 Data

4 SFP

-

Y

17.48 x 9.45 x 1.73

2.63

C1000-24P-4G-L

24 10/100/1000 RJ45 PoE+

4 SFP

195W

Y

17.48 x 11.76 x 1.73

3.53

C1000-24FP-4G-L

24 10/100/1000 RJ45 PoE+

4 SFP

370W

N

17.48 x 13.59 x 1.73

4.6

C1000-48T-4G-L

48 10/100/1000 RJ45 Data

4 SFP

-

N

17.48 x 11.34 x 1.73

3.95

C1000-48P-4G-L

48 10/100/1000 RJ45 PoE+

4 SFP

370W

N

17.48 x 13.78 x 1.73

5.43

C1000-48FP-4G-L

48 10/100/1000 RJ45 PoE+

4 SFP

740W

N

17.48 x 13.78 x 1.73

5.82

C1000-24T-4X-L

24 10/100/1000 RJ45 Data

4 SFP+

-

Y

17.48 x 9.45 x 1.73

2.78

C1000-24P-4X-L

24 10/100/1000 RJ45 PoE+

4 SFP+

195W

Y

17.48 x 11.76 x 1.73

3.68

C1000-24FP-4X-L

24 10/100/1000 RJ45 PoE+

4 SFP+

370W

N

17.48 x 13.59 x 1.73

4.6

C1000-48T-4X-L

48 10/100/1000 RJ45 Data

4 SFP+

-

N

17.48 x 11.34 x 1.73

3.95

C1000-48P-4X-L

48 10/100/1000 RJ45 PoE+

4 SFP+

370W

N

17.48 x 13.78 x 1.73

5.43

C1000-48FP-4X-L

48 10/100/1000 RJ45 PoE+

4 SFP+

740W

N

17.48 x 13.78 x 1.73

5.82

C1000FE-24T-4G-L

24 10/100 RJ45 Data

2 SFP/ RJ-45 combo and 2 SFP

-

Y

17.32 x 11.34 x 1.73

3.56

C1000FE-24P-4G-L

24 10/100 RJ45 PoE+

2 SFP/ RJ-45 combo and 2 SFP

195W

Y

17.48 x 13.78 x 1.73

4.52

C1000FE-48T-4G-L

48 10/100 RJ45 Data

2 SFP/ RJ-45 combo and 2 SFP

-

N

17.32 x 11.34 x 1.73

3.97

C1000FE-48P-4G-L

48 10/100 RJ45 PoE+

2 SFP/ RJ-45 combo and 2 SFP

370W

N

17.48 x 13.78 x 1.73

5.46

 

Switch management

Cisco Catalyst 1000 Series Switches support the following on-device management features:

      Web UI via Cisco Configuration Professional. Cisco Configuration Professional provides a user interface for day-zero provisioning, which enables easy onboarding of the switch. It also has an intuitive dashboard for configuring, monitoring, and troubleshooting the switch (Figure 1).

Cisco Configuration Professional

Figure 1.            Cisco Configuration Professional

      Bluetooth for over-the-air access. The switches support an external Bluetooth dongle that plugs into the USB port on the switch and allows a Bluetooth-based RF connection with external laptops and tablets (Figure 2). Laptops and tablets can access the switch CLI using a Telnet or Secure Shell (SSH) client over Bluetooth. The GUI can be accessed over Bluetooth with a browser.

Over-the-air switch access using Bluetooth

Figure 2.            Over-the-air switch access using Bluetooth

      Single IP Management is available on the Cisco Catalyst 1000 Series switches. The uplink ports can be used to connect up to eight switches in a sigle stack and manage them via a single IP address to ease the network management activities like configurations and troubleshooting. This feature is only available on the Gigabit ethernet models

Network management

The Cisco Catalyst 1000 Series Switches offer a superior CLI for detailed configuration and administration.

Intelligent PoE+

Cisco Catalyst 1000 Series Switches support both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) to deliver a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet® and Catalyst wireless access points, or other standards-compliant PoE and PoE+ end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.

The PoE power allocation in the Cisco Catalyst 1000 Series Switches is dynamic, and power mapping scales up to a maximum of 740W of PoE+ power. Intelligent power management allows flexible power allocation across all ports. With Perpetual PoE, the PoE+ power is maintained during a switch reload. This is important for critical endpoints such as medical devices and for IoT endpoints such as PoE-powered lights, so that there is no disruption during a switch reboot.

Network security

Cisco Catalyst 1000 Series Switches provide a range of security features to limit access to the network and mitigate threats, including:

      Comprehensive 802.1X features to control access to the network, including flexible authentication, 802.1X monitor mode, and RADIUS change of authorization.

      802.1X support with Network Edge Access Topology (NEAT), which extends identity authentication to areas outside the wiring closet (such as conference rooms).

      IEEE 802.1X user distribution, which enables you to load-balance users with the same group name across multiple different VLANs.

      Ability to disable per-VLAN MAC learning to allow you to manage the available MAC address table space by controlling which interface or VLANs learn MAC addresses.

      Multidomain authentication to allow an IP phone and a PC to authenticate on the same switch port while being placed on the appropriate voice and data VLANs.

      AuthenticationAuthorizationand Accounting (AAA) command authorization in PnP to enable seamless PnP provisioning.

      Access Control Lists (ACLS) for IPv6 and IPv4 security and Quality-of-Service (QoS) ACL elements (ACEs).

      Port-based ACLs for Layer 2 interfaces to allow security policies to be applied on individual switch ports.

      SSH, Kerberos, and SNMP v3 to provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSH, Kerberos, and the cryptographic version of SNMP v3 require a special cryptographic software image because of U.S. export restrictions.

      SPAN, with bidirectional data support, to allow the Cisco Intrusion Detection System (IDS) to take action when an intruder is detected.

      TACACS+ and RADIUS authentication to facilitate centralized control of the switch and restrict unauthorized users from altering the configuration.

      MAC address notification to notify administrators about users added to or removed from the network.

      MAC Authentication Bypass (MAB) and WebAuth with downloadable ACLs to allow per-user ACLs to be downloaded from the Cisco Identity Services Engine (ISE)as policy enforcement after authentication using MAB or web authentication in addition to IEEE 802.1X.

      Web authentication redirection to enable networks to redirect guest users to the URL they had originally requested.

      Multilevel security on console access to prevent unauthorized users from altering the switch configuration.

      BPDU Guard to shut down Spanning Tree PortFast-enabled interfaces when BPDUs are received, to avoid accidental topology loops.

      IP Source Guard to restrict IP traffic on nonrouted Layer 2 interfaces by filtering traffic based on the Dynamic Host Configuration Protocol (DHCP) snooping binding database or by manually configuring IP source bindings.

      SSH v2 to allow use of digital certificates for authentication between user and server.

      Spanning Tree Root Guard (STRG) to prevent edge devices that are not in the network administrator’s control from becoming Spanning Tree Protocol (STP) root nodes.

      Internet Group Management Protocol (IGMP) filtering to provide multicast authentication by filtering out nonsubscribers and to limit the number of concurrent multicast streams available per port.

      Dynamic VLAN assignment through implementation of VLAN Membership Policy Server client capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast assignment of IP addresses.

Redundancy and resiliency

Cisco Catalyst 1000 Series Switches offer a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available:

      IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefits of Layer 2 load balancing and distributed processing.

      Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.

      Switch-port auto-recovery (error disable) automatically attempts to reactivate a link that is disabled because of a network error.

      Link state tracking binds the link state of multiple interfaces. The server Network Interface Cards (NICs) form a group to provide redundancy in the network. When the link is lost on the primary interface, network connectivity is transparently changed to the secondary interface.

Enhanced QoS

Cisco Catalyst 1000 Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classifying, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Primary QoS features include:

      Up to eight egress queues and two thresholds per port, supporting egress bandwidth control, shaping, and priority queuing so that high-priority packets are serviced ahead of other traffic.

      Ingress policing to allow the analysis of IP service levels for IP applications and services using active traffic monitoring — generating traffic in a continuous, reliable, and predictable manner — for measuring network performance. The number of ingress policers available per port is 64.

      QoS through Differentiated Services Code Point (DSCP) mapping and filtering.

      QoS through traffic classification.

      Trust boundary to configure device-based trust.

      AutoQoS to simplify the deployment of QoS features.

      Shaped Round Robin (SRR) scheduling and Weighted Tail Drop (WTD) congestion avoidance.

      802.1p Class of Service (CoS) classification, with marking and reclassification.

Energy management

Cisco Catalyst 1000 Series Switches offer a range of industry-leading features for energy efficiency and management:

      IEEE 802.3az Energy Efficient Ethernet (EEE) enables ports to dynamically sense idle periods between traffic bursts and quickly switch the interfaces into a low-power idle mode, reducing power consumption.

      Loop detection is a new method to detect network loops in the absence of STP.

      Cisco AutoConfig determines the level of network access provided to an endpoint based on the type of device. This feature also permits hard binding between the end device and the interface.

      Cisco Auto SmartPorts enables automatic configuration of switch ports as devices connect to the switch with settings optimized for the device type, resulting in zero-touch port-policy provisioning.

      Cisco Smart Troubleshooting is an extensive array of diagnostic commands and system health checks in the switch, including Smart Call Home. The Cisco Generic Online Diagnostics (GOLD) and online diagnostics on switches in live networks help predict and detect failures more quickly.

Operational simplicity

      Cisco AutoSecure provides a single-line CLI to enable baseline security features (port security, DHCP snooping, Dynamic Address Resolution Protocol [ARP] Inspection). This feature simplifies security configurations with a single touch.

      DHCP auto configuration of multiple switches through a boot server eases switch deployment.

      Auto negotiation on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.

      Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.

      Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or Gigabit EtherChannel groups to link to another switch, router, or server.

      Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

      Automatic Media-Dependent Interface Crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.

      Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.

      Local Proxy ARP works in conjunction with Private VLAN Edge to minimize broadcasts and maximize available bandwidth.

      VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk.

      IGMP snooping for IPv4 and IPv6 and Multicast Listener Discovery (MLD) v1 and v2 snooping provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only the requesters.

      Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall system performance.

      Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting.

      Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across all switches.

      Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source to destination.

      Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.

      Network Time Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.

Specifications

 

8-port models

16-port models

24-port models (1/10G uplinks)

48-port models (1/10G uplinks)

Console ports

RJ-45 Ethernet

1

1

1

1

USB mini-B

1

1

1

1

USB-A port for storage and Bluetooth console

1

1

1

1

Memory and processor

CPU

ARM v7 800 MHz

ARM v7 800 MHz

ARM v7 800 MHz

ARM v7 800 MHz

DRAM

512 MB

512 MB

512 MB

512 MB

Flash memory

256 MB

256 MB

256 MB

256 MB

Performance

Forwarding bandwidth

10 Gbps

18 Gbps

FE: 6.4 Gbps

1G: 28 Gbps

10G: 64 Gbps

FE: 8.8 Gbps

1G: 52 Gbps

10G: 88Gpbs

Switching bandwidth

20 Gbps

36 Gbps

FE: 12.8 Gbps

1G: 56 Gbps

10G: 128 Gbps

FE: 17.6 Gbps

1G: 104 Gbps

10G: 176 Gbps

Forwarding rate
(64‑byte L3 packets)

14.88 Mpps

26.78 Mpps

FE: 9.52 Mpps

1G: 41.67 Mpps

10G: 95.23 Mpps

FE: 13.09 Mpps

1G: 77.38 Mpps

10G: 130.94

MAC addresses

16000

16000

16000

16000

IPv4 unicast direct routes

542

542

542

542

IPv4 unicast indirect routes

256

256

256

256

IPv6 unicast direct routes

414

414

414

414

IPv6 unicast indirect routes

128

128

128

128

IPv4 multicast routes and IGMP groups

1024

1024

1024

1024

IPv6 multicast groups

1024

1024

1024

1024

IPv4/MAC security ACEs

600

600

600 (FE: 384)

600 (FE: 384)

IPv6 security ACEs

600

600

600 (FE: 256)

600 (FE: 256)

Maximum active VLANs

256

256

256

256

VLAN IDs available

4094

4094

4094

4094

Maximum STP instances

64

64

64

64

Maximum SPAN sessions

4

4

4

4

MTU-L3 packet

9198 bytes

9198 bytes

9198 bytes

9198 bytes

Jumbo Ethernet frame

10,240 bytes

10,240 bytes

10,240 bytes

10,240 bytes

Dying Gasp

Yes

Yes

Yes (FE: No)

Yes (FE: No)

MTBF in hours (data)

2,171,669

2,165,105

2,026,793

1,452,667

MTBF in hours (PoE)

1,786,412, 1,706,649 (External PS)

706,983

698,220

856,329

MTBF in hours (Full PoE)

1,706,649

-

698,220

856,329

Environmental

Operating temperature

Sea level

-5 to 50 deg C*

Up to 5,000ft (1500 m)

-5 to 45 deg C

Upto 10,000 (3000 m)

-5 to 40 deg C

Operating altitude

10,000 ft (3,000m)

Operating relative humidity

5% to 90% at 40 deg C (non-condensing)

Storage temperature

-13 to 158F (-25 to 70C)

Storage altitude

15,000 ft (4500m)

Storage relative humidit

5% to 95% at 65 deg C (non-condensing)

*Note:

  50C operation is supported for short term operation only;
  When using C1000-8T-E-2G-L, C1000-8T-2G-L, C1000-8P-E-2G-L, C1000-8P-2G-L, C1000-8FP-E-2G-L, C1000-8FP-2G-L, C1000-16T-E-2G-L, C1000-16T-2G-L, C1000-16P-E-2G-L, C1000-16P-2G-L, C1000-16FP-2G-L, C1000-24T-4G-L, C1000-24P-4G-L with GLC-BX-U or GLC-BX-D SFP module, the thermal limitations are as follows:

    Up to 5,000 feet, the operation temperature should not exceed 45ºC.

    Up to 10,000 feet, the operation temperature should not exceed 40ºC.

  When using C1000-24T-4X-L, C1000-24P-4X-L with SFP-10G-ER or SFP-10G-ER-S SFP+ module, the thermal limitations are as follows:

    Up to 5,000 feet, the operation temperature should not exceed 45ºC.

    Up to 10,000 feet, the operation temperature should not exceed 40ºC.

  Minimum ambient temperature for cold start is at 0 deg C (32 deg F)

Acoustic noise (48-port PoE models only)

Sound pressure (Typical)

 

 

C1000-24FP-4G-L, C1000-24FP-4X-L – 34.8 dB

C1000-48T-4G-L, C1000-48T-4X-L – 31.5 dB

 

 

 

C1000-48P-4G-L, C1000-48P-4X-L – 36.1 dB

 

 

 

C1000-48FP-4G-L

C1000-48FP-4X-L – 47.6dB

Note: Bystander positions operating mode at 77°F (25°C) ambient; All other models are fanless for silent operations

Safety and compliance

Safety

UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1

GB 4943.1-2011

EMC: Emissions

47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A

EMC: Immunity

EN55024 (including EN 61000-4-5), EN300386, KN35

Environmental

Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU

Telco

Common Language Equipment Identifier (CLEI) code

U.S. government certifications

USGv6 and IPv6 Ready Logo

Connectors and interfaces

Ethernet interfaces

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling

100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Indicator LEDs

Per-port status: link integrity, disabled, activity

System status: System

Console cables

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45

CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors

Power

Use the supplied AC power cord to connect the AC power connector to an AC power outlet

Models have external power supply

Management

 

BRIDGE-MIB

CISCO-CABLE-DIAG-MIB

CISCO-CDP-MIB

CISCO-CLUSTER-MIB

CISCO-CONFIG-COPY-MIB

CISCO-CONFIG-MAN-MIB

CISCO-DHCP-SNOOPING-MIB

CISCO-ENTITY-VENDORTYPE-OID-MIB

CISCO-ENVMON-MIB

CISCO-ERR-DISABLE-MIB

CISCO-FLASH-MIB

CISCO-FTP-CLIENT-MIB

CISCO-IGMP-FILTER-MIB

CISCO-IMAGE-MIB

CISCO-IP-STAT-MIB

CISCO-LAG-MIB

CISCO-MAC-NOTIFICATION-MIB

CISCO-MEMORY-POOL-MIB

CISCO-PAGP-MIB

CISCO-POE-EXTENSIONS-MIB

CISCO-PORT-QOS-MIB

CISCO-PORT-SECURITY-MIB

CISCO-PORT-STORM-CONTROL-MIB

CISCO-PRODUCTS-MIB

CISCO-PROCESS-MIB

CISCO-RTTMON-MIB

CISCO-SMI-MIB

CISCO-STP-EXTENSIONS-MIB

CISCO-SYSLOG-MIB

CISCO-TC-MIB

CICSO-TCP-MIB

CISCO-UDLDP-MIB

CISCO-VLAN-IFTABLE

CISCO-VLAN-MEMBERSHIP-MIB

CISCO-VTP-MIB

ENTITY-MIB

ETHERLIKE-MIB

IEEE8021-PAE-MIB

IEEE8023-LAG-MIB

IF-MIB

INET-ADDRESS-MIB

OLD-CISCO-CHASSIS-MIB

OLD-CISCO-FLASH-MIB

OLD-CISCO-INTERFACES-MIB

OLD-CISCO-IP-MIB

OLD-CISCO-SYS-MIB

OLD-CISCO-TCP-MIB

OLD-CISCO-TS-MIB

RFC1213-MIB

RMON-MIB

RMON2-MIB

SNMP-FRAMEWORK-MIB

SNMP-MPD-MIB

SNMP-NOTIFICATION-MIB

SNMP-TARGET-MIB

SNMPv2-MIB

TCP-MIB

UDP-MIB

Standards

 

IEEE 802.1D STP

IEEE 802.1p CoS Prioritization

IEEE 802.1Q VLAN

IEEE 802.1s

IEEE 802.1w

IEEE 802.1X

IEEE 802.1ab LLDP

Bluetooth v4.0

IEEE 802.3ad

IEEE 802.3af and IEEE 802.3at

IEEE 802.3ah (100BASE-X single/multimode fiber only)

IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-X

RMON I and II standards

SNMP v1, v2c, and v3

IEEE 802.3az

IEEE 802.3ae 10 Gigabit Ethernet

IEEE 802.1ax

RFC compliance

 

RFC 768 - UDP

RFC 783 - TFTP

RFC 791 - IP

RFC 792 - ICMP

RFC 793 - TCP

RFC 826 - ARP

RFC 854 - Telnet

RFC 951 - Bootstrap Protocol (BOOTP)

RFC 959 - FTP

RFC 1112 - IP Multicast and IGMP

RFC 1157 - SNMP v1

RFC 1166 - IP Addresses

RFC 1256 - ICMP Router Discovery

RFC 1305 - NTP

RFC 1492 - TACACS+

RFC 1493 - Bridge MIB

RFC 1542 - BOOTP extensions

RFC 1901 - SNMP v2C

RFC 1902-1907 - SNMP v2

RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6

FRC 2068 - HTTP

RFC 2131 - DHCP

RFC 2138 - RADIUS

RFC 2233 - IF MIB v3

 

Warranty

Cisco Catalyst 1000 Series Switches come with an Enhanced Limited Lifetime Warranty (E-LLW). The E-LLW provides the same terms as the Cisco standard limited lifetime warranty but adds next-business-day delivery of replacement hardware, where available, and 90 days of 8x5 Cisco Technical Assistance Center (TAC) support. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For more information about warranty terms, visit https://www.cisco.com/go/warranty and see below.

Warranty information

Cisco enhanced limited lifetime hardware warranty

Device covered

Applies to all Cisco Catalyst 1000 Series Switches

Warranty duration

As long as the original end user continues to own or use the product.

End-of-life policy

In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance.

Hardware replacement

Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 1000 Series replacement part for next-business-day delivery, where available. Otherwise, a replacement will be shipped within 10 working days after the receipt of the RMA request. Actual delivery times might vary depending on customer location.

Effective date

Hardware warranty commences from the date of shipment to the customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco).

TAC support

Cisco will provide, during the customer's local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 1000 Series product. This support does not include solution or network-level support beyond the specific device under consideration.

Cisco.com access

Warranty allows guest access only to Cisco.com.

Software policy

Customers are provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier.

This policy supersedes any previous warranty or software statement and is subject to change without notice.

ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท Switch / Hub
Model Catalyst 1000
Switch Type LAN Access Switches
Switch Layer 2
License / Features LAN Lite
10/100 Ethernet Down-link Ports ไม่
10/100/1000 Ethernet Down-link Ports 8 Port
SFP 10/100 Down-Links ไม่
SFP 1G Down-Links ไม่
SFP+ Down-Links ไม่
SFP / SFP+ Down-Links ไม่
Uplink Interfaces 2x 1G SFP OR 2x 1G RJ-45 (SFP / RJ45)
Switching capacity ไม่
Redundant Power Supply ไม่
Stack ไม่
Stacking Bandwidth ไม่
PoE Support Support
Available PoE Power 67W
PoE+ 30W (IEEE 802.3at) Ports ไม่
PoE 15.4W (IEEE 802.3af) Ports ไม่
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco Catalyst 1000 | C1000-8P-2G-L 8x 10/100/1000 Ethernet PoE+ ports and 67W PoE budget, 2x 1G SFP and RJ-45 combo uplinks
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา