มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco Catalyst 9100 | C9117AXI-S Catalyst 9117AXI Internal Ant. Access Point

SKU: C9117AXI-S
Band: Cisco
Type: Wireless Access Point
Model: Catalyst 9100
Part Number: C9117AXI-S
Features: Lightweight AP
Detail:
C9117AXI-S | Catalyst 9117AXI Internal Ant. Access Point
฿24,000.00 Exclude VAT.
Cisco
รายละเอียดสินค้า
รายละเอียด

Features and benefits

Feature

Benefits

802.11ax (Wi-Fi 6)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac standard.

802.11ac Wave 2 support

Provides a connection rate of up to 3.5 Gbps—significantly higher than rates offered by today’s high-end 802.11ac access points.

OFDMA

OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients only in the downlink direction to reduce overhead and latency.

MU‑MIMO technology

Supporting eight spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.

Target wake time

A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the AP. This offers significant energy savings for battery-operated devices, up to 3x to 4x compared to 802.11n and 802.11ac.

Embedded Catalyst Wireless Controller

The 9117 Series Wi-Fi 6 access points are available with a built-in controller. The Cisco Embedded Wireless Controller on Catalyst 9100 Access Points provides an easy-to-deploy and manage option that does not require a physical appliance. The control resides on the access point, so there is no added footprint or complexity. And, because it uses Cisco Catalyst 9800 Series Wireless Controller code, it’s easy to migrate your network as your needs grow.

User Defined Network

A feature available in Cisco DNA Center, allows IT to give end users control of their very own wireless network partition on a shared network. End users can then remotely and securely deploy their devices on this network. Perfect for university dormitories or extended hospital stays, Cisco User Defined Network grants both device security and control, allowing each user to choose who can connect to their network.

Application Hosting on Catalyst 9100 Access

Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.

Multigigabit Ethernet support

Provides uplink speeds of 5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.

Bluetooth 5.0

Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.

Apple features

Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in iOS 10, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications.

At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.

Product specifications

Item

Specification

Part numbers

Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas

●  C9117AXI-S: Cisco Catalyst 9117

Cisco Catalyst 9117AXI Access Point: Indoor environments, with internal antennas, with embedded wireless controller

●  C9117AXI-EWC-S: Cisco Catalyst 9117

Regulatory domains: (S = Thailand domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

Software

●  Cisco Unified Wireless Network Software Release 8.9 or later
●  Cisco IOS ® XE Software Release 16.11 or later

Supported wireless LAN controllers

●  Cisco Catalyst 9800 Series Wireless Controllers
●  Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

●  8x8 MIMO with four spatial streams for 5-GHz band
●  4x4 MIMO with four spatial streams for 2.4-GHz band
●  Maximal Ratio Combining (MRC)
●  20- and 40-MHz channels
●  PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  Cyclic Shift Diversity (CSD) support

802.11ac

●  8x8 downlink MU-MIMO with eight spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80, and 160-MHz channels
●  PHY data rates up to 3.5 Gbps at 5 GHz
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  CSD support
●  160 MHz support only on 4-spatial stream

802.11ax

●  8x8 MIMO with eight spatial streams for 5-GHz band
●  4x4 MIMO with four spatial streams for 2.4-GHz band
●  Downlink OFDMA
●  TWT
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80, and 160-MHz channels
●  PHY data rates up to 5 Gbps at 5 GHz
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  CSD support

Integrated antenna

●  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth

Interfaces

●  1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
●  Management console port (RJ-45)
●  USB 2.0 with up to 4.5W (enabled via future software)

Indicators

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

●  Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
●  Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)

Weight

●  3.02 lb (1.4 kg)

Input power requirements

●  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
●  Cisco power injector, AIR-PWRINJ6=
●  802.3af PoE
●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.

Power draw

802.3bt Cisco UPOE+ Cisco UPOE Full Feature

 

Power source

Power type

2.4-GHz
radio

5-GHz
radio

Link speed

USB

LLDP

802.3bt Cisco

UPOE+, Cisco

UPOE

PoE

4x4

8x8

5 Gbps

Y

28.9W

802.3at Full Feature*

Power source

Power type

2.4-GHz
radio

5-GHz
radio

Link speed

USB

LLDP

802.3at

PoE

4x4

8x8

5 Gbps

N

25.4W

802.3af Reduced Feature

Power source

Power type

2.4-GHz
radio

5-GHz
radio

Link speed

USB

LLDP

802.3af

PoE

2x2

2x2

2.5 Gbps

N

13.5W

* USB port can be enabled, but the 5-GHz radio will be reduced to 4x4.

Note: Power required at the Power Source Equipment (PSE) will depend on the cable length and other environmental issues

Environmental

●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
●  Operating temperature: 32° to 122°F (0° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.

System memory

●  2048 MB DRAM
●  1024 MB flash

Warranty

Limited lifetime hardware warranty

Available transmit power settings

2.4 GHz

●  23 dBm (200 mW)
●  -6 dBm (0.25 mW)

5 GHz

●  26 dBm (400 mW)
●  -4 dBm (0.4 mW)

Regulatory domains

Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country.

Compliance standards

●  Safety:

◦    IEC 60950-1

◦    EN 60950-1

◦    AS/NZS 60950.1

◦    UL 60950-1

◦    CAN/CSA-C22.2 No. 60950-1

◦    UL 2043

◦    Class III equipment

●  Emissions:

◦    CISPR 32 (rev. 2015)

◦    EN 55032 (rev. 2012/AC:2013)

◦    EN 55032 (rev. 2015)

◦    EN61000-3-2 (rev. 2014)

◦    EN61000-3-3 (rev. 2013)

◦    KN61000-3-2

◦    KN61000-3-3

◦    AS/NZS CISPR 32 Class B (rev. 2015)

◦    47 CFR FCC Part 15B

◦    ICES-003 (rev. 2016 Issue 6, Class B)

◦    VCCI (V3)

◦    CNS (rev. 13438)

◦    KN-32

◦    TCVN 7189 (rev. 2009)

●  Immunity:

◦    CISPR 24 (rev. 2010)

◦    EN 55024/EN 55035 (rev. 2010)

●  Emissions and immunity:

◦    EN 301 489-1 (v2.1.1 2017-02)

◦    EN 301 489-17 (v3.1.1 2017-02)

◦    QCVN (18:2014)

◦    KN 489-1

◦    KN 489-17

◦    EN 60601 (1-1:2015)

●  Radio:

◦    EN 300 328 (v2.1.1)

◦    EN 301 893 (v2.1.1)

◦    AS/NZS 4268 (rev. 2017)

◦    47 CFR FCC Part 15C, 15.247, 15.407

◦    RSP-100

◦    RSS-GEN

◦    RSS-247

◦    China regulations SRRC

◦    LP0002 (rev 2018.1.10)

◦    Japan Std. 33a, Std. 66, and Std. 71

◦    EMI and susceptibility (Class B)

●  RF safety:

◦    EN 50385 (rev. Aug 2002)

◦    ARPANSA

◦    AS/NZS 2772 (rev. 2016)

◦    EN 62209-1 (rev. 2016)

◦    EN 62209-2 (rev. 2010)

◦    47 CFR Part 1.1310 and 2.1091

◦    RSS-102

●  IEEE standards:

◦    IEEE 802.3

◦    IEEE 802.3ab

◦    IEEE 802.3af/at/bt

◦    IEEE 802.11 a/b/g/n/ac/ax

◦    IEEE 802.11h, 802.11d

●  Security:

◦    802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA

◦    802.1X

◦    Advanced Encryption Standard (AES)

●  Extensible Authentication Protocol (EAP) types:

◦    EAP-Transport Layer Security (TLS)

◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)

◦    Protected EAP (PEAP) v0 or EAP-MSCHAPv2

◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦    PEAP v1 or EAP-Generic Token Card (GTC)

◦    EAP-Subscriber Identity Module (SIM)

 

Antenna radiation patterns for the 9117I_A

 

Antenna radiation patterns for the 9117I_b

 

Antenna radiation patterns for the 9117I_C

Figure 1.            Antenna radiation patterns for the 9117I

 

Warranty information

The Cisco Catalyst 9117 Series Access Points come with a limited lifetime warranty that provides full warranty coverage of the hardware for as long as the original end user continues to own or use the product. The warranty includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For more details.

ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท Wireless Access Point
Model Catalyst 9100
License / Features Lightweight AP
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco Catalyst 9100 | C9117AXI-S Catalyst 9117AXI Internal Ant. Access Point
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา