- หน้าหลัก
- Industrial (สำหรับอุตสาหกรรม)
- Cisco Catalyst IE3400 Heavy Duty | IE-3400H-8FT-A Catalyst IE3400 Heavy Duty, 8 FE M12 interfaces, Network Advantage
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst IE3400 Heavy Duty | IE-3400H-8FT-A Catalyst IE3400 Heavy Duty, 8 FE M12 interfaces, Network Advantage
Band: | Cisco |
Type: | Cisco Networks |
Model: | Catalyst IE3400 Heavy Duty |
Part Number: | IE-3400H-8FT-A |
Features: | Network Advantage |
Detail: | IE-3400H-8FT-A | Catalyst IE3400 Heavy Duty, 8 FE M12 interfaces, Network Advantage |
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- การรับประกัน
- การจัดส่ง
- การชำระเงิน
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
Product Overview
The Cisco Catalyst IE3400 Heavy Duty Series switches deliver the advanced capabilities similar to the Cisco Catalyst IE3400 Rugged Series in environments that have heavy exposure to dust and water. These switches are available with 8, 16, or 24 Fast Ethernet (D-coded) or Gigabit Ethernet (X-coded) M12 interfaces. The switches can be wall mounted and deployed without a housing cabinet.
The IE3400 Heavy Duty Series switches are powered by Cisco IOS® XE, a next-generation operating system with built-in security and trust, featuring Secure Boot, image signing, and the Cisco Trust Anchor module. Cisco IOS XE also provides API-driven configuration with open APIs and data models.
The IE3400 Heavy Duty Series can be managed with powerful tools such as Cisco DNA Center and Industrial Network Director, and can be easily set up with a completely redesigned, user-friendly, modern GUI tool called WebUI. The platform also supports Flexible NetFlow for real-time visibility into traffic patterns and threat analysis with Cisco Stealthwatch®.
Product Highlights
Feature |
Benefit |
Heavy-duty design and industry compliance |
Mount the switch close to where the work is done, in the most demanding environments. ● IP65/IP66/IP67 * rated, providing protection against dust and submersion in water.
● Hardened for vibration, shock and surge, electrical noise, and extreme temperatures (–40°C to 75°C [–40°F to 167°F]).
● Compliant with industrial automation standards; supports Ethernet/IP Common Industrial Protocol (CIP).
● Supports Supervisory Control And Data Acquisition (SCADA) protocol classification—Generic Object-Oriented Substation Events (GOOSE) messaging, Modbus TCP/IP.
|
Advanced network-based security |
Enjoy peace of mind with Cisco’s no-compromise security feature set, including: ● Flexible NetFlow for enhanced flow and threat visibility.
● Cisco TrustSec ® software-defined segmentation allows you to segment industrial devices and define security policies to each segment. It makes sure that devices can access only the resources and applications they should and isolates segments when threats are detected to avoid the spread of attacks.
● Advanced security through support for Advanced Encryption Standard (AES)-256 with the powerful MACsec 256-bit encryption algorithm available on all models.
● Hardware-anchored Secure Boot and Secure Unique Device Identification (SUDI) support for plug and play, to verify the identity of the hardware and software.
|
Next-generation switching features and innovations |
● Same software image as the Cisco Catalyst IE3x00 Rugged Series, for access to Cisco’s latest innovations in switching.
● Available with 8, 16, or 24 Fast Ethernet (M12 D-coded) ports or Gigabit Ethernet (M12 X-coded) ports.
|
Flexible management options |
● Extend the power of intent-based networking with Cisco DNA Center.
● Manage your network with the powerful Industrial Network Director.
● Easily set up the switch with a completely redesigned, user-friendly, highly intuitive, and modern GUI called WebUI.
● Gain real-time visibility into traffic patterns and threat analysis with Cisco Stealthwatch.
|
Other product highlights
● Swap Drive zero-configuration replacement helps ensure fast recovery.
● Precision Time Protocol (PTP, IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy.
● Support for model-driven programmability, including NETCONF, RESTCONF, and YANG.
● Alarm I/O for monitoring and signaling to external equipment.
● Single power source, mini-change power connector.
Platform Support
Product family |
Platforms supported |
Cisco IOS images (feature sets) supported |
IE3400 |
IE-3400H-8FT IE-3400H-16FT IE-3400H-24FT |
Network Essentials (default), Network Advantage |
IE3400 |
IE-3400H-8T IE-3400H-16T IE-3400H-24T |
Network Essentials (default), Network Advantage |
Hardware Configurations
Hardware specifications |
IE-3400H-8FT |
IE-3400H-8T |
IE-3400H-16FT |
IE-3400H-16T |
IE-3400H-24FT |
IE-3400H-24T |
Total 100-Mbps D-coded ports |
8 |
N/A |
16 |
N/A |
24 |
N/A |
Total 1-Gbps X-coded ports |
N/A |
8 |
N/A |
16 |
N/A |
24 |
Removable storage |
SD card1 |
SD card1 |
SD card1 |
SD card1 |
SD card1 |
SD card1 |
Alarm outputs2,3 |
1 alarm output relay |
1 alarm output relay |
1 alarm output relay |
1 alarm output relay |
1 alarm output relay |
1 alarm output relay |
Alarm inputs2 |
1 alarm input |
1 alarm input |
1 alarm input |
1 alarm input |
1 alarm input |
1 alarm input |
Console ports2 |
1 |
1 |
1 |
1 |
1 |
1 |
Power input |
Mini-change, (single power source) |
Mini-change, (single power source) |
Mini-change, (single power source) |
Mini-change, (single power source) |
Mini-change, (single power source) |
Mini-change, (single power source) |
Physical Configurations
Physical specifications |
IE-3400H-8FT |
IE-3400H-8T |
IE-3400H-16FT |
IE-3400H-16T |
IE-3400H-24FT |
IE-3400H-24T |
Dimensions |
9.58 x 7.90 x 3.15 in. 24.33 x 20.07 x 8.00 cm |
9.58 x 7.90 x 3.15 in. 24.33 x 20.07 x 8.00 cm |
9.58 x 10.90 x 3.15 in. 24.33 x 27.69 x 8.00 cm |
9.58 x 10.90 x 3.15 in. 24.33 x 27.69 x 8.00 cm |
9.58 x 13.90 x 3.15 in. 24.33 x 35.31 x 8.00 cm |
9.58 x 13.90 x 3.15 in. 24.33 x 35.31 x 8.00 cm |
Weight (including mounting bracket) |
8.45 lb 4.35 kg |
8.45 lb 4.35 kg |
11.25 lb 5.10 kg |
11.25 lb 5.10 kg |
13.90 lb 6.30 kg |
13.90 lb 6.30 kg |
Mounting |
Wall mount |
Wall mount |
Wall mount |
Wall mount |
Wall mount |
Wall mount |
Performance and Scalability Features
Physical specifications |
IE-3400H-8FT, IE-3400H-8T, IE-3400H-16FT, IE-3400H-16T, IE-3400H-24FT, IE-3400H-24T |
Forwarding rate |
Line rate for all ports for all packet sizes |
Number of queues |
8 |
Unicast MAC addresses |
8000 |
IGMP multicast groups |
1000 |
VLAN IDs |
256 |
Spanning Tree Protocol instances |
128 |
Port Access Control Lists (PACLs) |
1500 |
DRAM |
4 GB |
Flash (user accessible) |
1.5 GB |
SD card capacity1 |
4 GB |
Power Specifications1
Power specifications |
IE-3400H-8FT |
IE-3400H-16FT |
IE-3400H-24FT |
IE-3400H-8T |
IE-3400H-16T |
IE-3400H-24T |
Input voltage range (Absolute) |
9.6 to 60VDC |
9.6 to 60VDC |
9.6 to 60VDC |
9.6 to 60VDC |
9.6 to 60VDC |
9.6 to 60VDC |
Input current @ (9.6V / 60V) |
3.0A/0.51A |
4.0A/0.65A |
4.6A/0.75A |
3.2A/0.54A |
4.4A/0.71A |
5.1A/0.83A |
Power consumption @ (9.6V / 60V) |
28.8W/30.6W |
38.4W/39.0W |
44.2W/45.0W |
30.4W/32.2W |
41.6W/42.3W |
49.0W/49.8W |
Power Supply Options
Product ID |
Wattage |
Rated nominal input operating range |
PWR-IE160W-67-DC= |
160W |
DC 18-60V/12A |
Network Essentials and Advantage Package Features
Features |
Network Essentials (default) |
Network Advantage |
|
Layer 2 switching |
IEEE 802.1, 802.3 standard, Network Time Protocol (NTP), Unidirectional Link Detection Protocol (UDLD), Cisco Discovery Protocol, Link Layer Discovery Protocol (LLDP), unicast MAC filter, VLAN Trunk Protocol (VTP) v2 and v3, EtherChannel, voice VLAN, Per-VLAN Spanning Tree (PVST+), Multiple Spanning Tree Protocol (MSTP), and Rapid Spanning Tree Protocol (RSTP) |
✓ |
✓ |
Layer 2 Multicast |
Internet Group Management Protocol (IGMP) v1, v2, v3 snooping, IGMP filtering, IGMP querier |
✓ |
✓ |
Management |
WebUI, MIB, SmartPort, Simple Network Management Protocol (SNMP), syslog, Locate switch, Dynamic Host Configuration Protocol (DHCP) server, Switched Port Analyzer (SPAN) session, Remote SPAN (RSPAN), Express setup |
✓ |
✓ |
Security |
Port security, 802.1X, DHCP snooping, dynamic Address Resolution Protocol (ARP) inspection, IP source guard, guest VLAN MAC authentication bypass, SXP, 802.1X multidomain authentication, storm control—unicast, multicast, broadcast, Secure Copy (SCP), Secure Shell (SSH), SNMPv3, TACACS+, RADIUS server/client, MAC address notification, Bridge Protocol Data Unit (BPDU) guard, ACLs, MACsec-128, MACsec-256, Flexible NetFlow |
✓ |
✓ |
Quality of Service (QoS) |
Ingress policing, rate limit, egress queuing and shaping, auto QoS |
✓ |
✓ |
Layer 3 routing |
Inter-VLAN routing, static routing |
✓ |
✓ |
Industrial Ethernet |
CIP Ethernet/IP, IEEE 1588 PTP v2 |
✓ |
✓ |
Redundancy |
Resilient Ethernet Protocol (REP) ring, Media Redundancy Protocol (MRP) ring |
✓ |
✓ |
Utility |
Dying gasp, SCADA protocol classification–GOOSE messaging, Modbus TCP/IP |
✓ |
✓ |
IP unicast routing protocols |
Open Shortest Path First (OSPF) |
✗ |
✓ |
IPv6 routing |
OSPFv6 |
✗ |
✓ |
Advanced security |
Cisco TrustSec, Security Group Tag (SGT) inline tagging and Security Group ACLs (SGACL) |
✗ |
✓ |
Virtualization |
Virtual Routing and Forwarding (VRF)-lite |
✗ |
✓ |
Automation |
NETCONF, RESTCONF, YANG |
✓ |
✓ |
Cisco DNA Essentials and Advantage Package Features
Features |
Cisco DNA Essentials |
Cisco DNA Advantage |
|
Cisco DNA Center |
Discovery, topology, inventory, software image management |
✓ |
✓ |
Visibility |
Cisco DNA Assurance, Device 360 |
✓ |
✓ |
Day-zero network bring-up automation |
Cisco Network Plug-and-Play application |
✓ |
✓ |
Software-defined access |
Policy-based automation; the IE3400 Heavy Duty Series can function as an SD-Access extended node |
✗ |
✓ |
Compliance Specifications1
Description |
Specification |
ITE safety standards/ certifications |
UL/cUL Listing to UL/CSA 60950-1 UL/cUL Listing to UL/CSA 62368-1 CB to IEC 60950-1 and IEC 62368-1 with all country national deviations |
ICE and manufacturing safety standards/ certifications |
UL/cUL Listing to UL/CSA 61010-2-201 |
Water and dust protection standards/ratings |
IEC 60529: IP65/IP66/IP67 (in progress) UL 50E, type 4X rating (in progress) UL/CSA/EN/IEC 60950-22 (in progress) |
EMC emissions and immunity compliance |
Emissions (Class A): FCC 47 CFR Part 15 subpart B ICES-003 EN 55011 EN 55032/ CISPR 32 AS/NZS CISPR 32 CNS13438 Immunity: EN55024/CISPR 24 Amd 1 AS/NZS CISPR 24 Amd 1 |
Shock and vibration |
IEC 60068-2-6 Vibration: IEC 60068-2-6, IEC 255 21.1 Class 1 Vibration Test IEC 60068-2-27 (Shock) IEC 60068-2-31 (Shock) IEC 60068-2-32 (Shock) IEC 60068-2-64 (Vibration) |
Industry standards |
EN 61000-6-1 Immunity standards for light industrial ENV EN 61000-6-2 Immunity standards for industrial ENV EN 61000-6-4- Emission standard industrial ENV EN 61326-1 Industrial control ODVA Industrial Ethernet/IP PROFINET certification (in progress) |
Corrosive testing |
EN 60068-2-52 Salt mist testing (pending) |
Humidity |
IEC 60068 -2-3 IEC 60068-2-30 Relative humidity: 5% to 95% noncondensing |
Operating temperature, environment, reliability |
-40°C to +75°C (-40F to 167F) (with airflow) with 200 LFM airflow -40°C to +70°C (-40F to 158F) with 40 LFM airflow -40°C to + 60°C (-40F to 140F) with 0 LFM airflow -40°C to +85°C (-40F to 185F) (type tested to +85°C for 16 hours) EN 60068-2-1 EN 60068-2-2 EN 61163 Altitude: Up to 13,800 feet or 4,200 meters |
Storage temperature |
-40°C to +85°C (-40F to 185F) IEC 60068-2-14 Altitude: Up to 13,800 feet (4,200 m) |
Mean Time between Failures (MTBF) Information
Product detail |
MTBF (in hours) |
IE-3400H-8FT |
566,908 |
IE-3400H-16FT |
489,458 |
IE-3400H-24FT |
439,475 |
IE-3400H-8T |
566,908 |
IE-3400H-16T |
489,458 |
IE-3400H-24T |
439,475 |
Industry Standards
Descriptions |
Specifications |
|
IEEE standards |
IEEE 802.1D MAC Bridges, STP IEEE 802.1p Layer 2 COS prioritization IEEE 802.1q VLAN IEEE 802.1s MSTP IEEE 802.1w RSTP IEEE 802.1X Port Access Authentication IEEE 802.1AB LLDP IEEE 802.3ad Link Aggregation (LACP) |
IEEE 1588v2 PTP IEEE 802.3x full duplex on 10BASE-T IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification |
RFC compliance |
RFC 768: UDP RFC 783: TFTP RFC 791: IPv4 protocol RFC 792: ICMP RFC 793: TCP RFC 826: ARP RFC 854: Telnet RFC 959: FTP RFC 1157: SNMPv1 RFC 1901, 1902-1907 SNMPv2 RFC 2273-2275: SNMPv3 RFC 2571: SNMP Management RFC 1166: IP Addresses RFC 1256: ICMP Router Discovery RFC 1305: NTP |
RFC 1492: TACACS+ RFC 1493: Bridge MIB Objects RFC 1534: DHCP and BOOTP interoperation RFC 1542: Bootstrap Protocol RFC 1643: Ethernet Interface MIB RFC 1757: RMON RFC 2068: HTTP RFC 2131, 2132: DHCP RFC 2236: IGMP v2 RFC 3376: IGMP v3 RFC 2474: DiffServ Precedence RFC 3046: DHCP Relay Agent Information Option RFC 3580: 802.1x RADIUS RFC 4250-4252 SSH Protocol |
SNMP MIB objects |
802.1X MIB CISCO-DHCP-SNOOPING-MIB CISCO-UDLDP-MIB CISCO-ENVMON-MIB CISCO-PRIVATE-VLAN-MIB CISCO-PAE-MIB Cisco-Port-QoS-MIB CISCO-ERR-DISABLE-MIB CISCO- PROCESS-MIB LLDP-MIB CiscoMACNotification-MIB CISCO-CONFIG-COPY-MIB LLDP-MED-MIB Bridge-MIB CISCO-CAR-MIB CISCO-LAG-MIB CISCO-SYSLOG-MIB CISCO-FTP-CLIENT-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB CISCO-VLAN-MEMBERSHIP-MIB Cisco-REP-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-CDP-MIB CISCO-IP-STAT-MIB CISCO-LICENSE-MGMT-MIB CISCO-STP-EXTN-MIB CISCO-VTP-MIB IEEE8023-LAG-MIB SMON-MIB CISCO-ACCESS-ENVMON-MIB CISCO-CALLHOME-MIB CISCO-CONFIG-MAN-MIB CISCO-FLASH-MIB |
CISCO-IF-EXTENSION-MIB CISCO-IMAGE-MIB CISCO-MEMORY-POOL-MIB CISCO-PING-MIB SNMP-TARGET-EXT-MIB IF_MIB ENTITY-MIB LLDP-EXT-PNO-MIB NOTIFICATION-LOG-MIB OLD-CISCO-CPU-MIB ETHERLIKE-MIB OLD-CISCO-SYSTEM-MIB OLD-CISCO-MEMORY-MIB RMON-MIB SNMP-COMMUNITY-MIB SNMP-FRAMEWORK-MIB SNMP-PROXY-MIB SNMP-MPD-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMP-USM-MIB CISCO-DATACOLLECTION-MIB CISCO-CABLE-DIAG-MIB CISCO -PORT-SECURITY-MIB BULK_FILE_MIB NAC-NAD-MIB CISCO-ENTITY-ALARAM-MIB SNMP-VIEW-BASED-ACM-MIB CISCO-MAC-AUTH-BYPASS-MIB CISCO-AUTH-FRAMEWORK-MIB CISCO-BRIDGE-Ext-MIB SNMPv2-MIB CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-PRODUCTS-MIB |
ประเภท | Cisco Networks |
---|---|
Model | Catalyst IE3400 Heavy Duty |
Switch Type | LAN Access Switches |
Switch Layer | 2 |
License / Features | Network Advantage |
10/100 Ethernet Down-link Ports | 4 Port |
10/100/1000 Ethernet Down-link Ports | ไม่ |
SFP 10/100 Down-Links | ไม่ |
SFP 1G Down-Links | ไม่ |
SFP+ Down-Links | ไม่ |
SFP / SFP+ Down-Links | ไม่ |
Uplink Interfaces | ไม่ใช่ |
Switching capacity | ไม่ |
Redundant Power Supply | ไม่ |
Stack | ไม่ |
Stacking Bandwidth | ไม่ |
PoE Support | ไม่ |
Available PoE Power | ไม่ |
PoE+ 30W (IEEE 802.3at) Ports | ไม่ |
PoE 15.4W (IEEE 802.3af) Ports | ไม่ |