มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)

Cisco Aironet 3802 | AIR-AP3802E-S-K9 Aironet 3802e Lightweight AP External antennas, Support 6 dBi

SKU: AIR-AP3802E-S-K9
Band: Cisco
Type: Wireless Access Point
Model: Aironet 3802
Part Number: AIR-AP3802E-S-K9
Features: Lightweight AP
Detail:
AIR-AP3802E-S-K9 | Aironet 3802e Lightweight AP External antennas, Support 6 dBi
฿58,500.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
Cisco
รายละเอียดสินค้า
รายละเอียด

Features and benefits

Feature

Benefit

802.11ac Wave 2 support

Provides a theoretical connection rate of up to 2.6 Gbps per radio—roughly double the rates offered by today’s high-end 802.11ac access points.

High-density experience

Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience. Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir®, Cisco ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming experience.

Multiuser Multiple-Input Multiple-Output (MU-MIMO) technology

Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.

Multigigabit Ethernet support

Providing multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100-Mbps and 1-Gbps speeds. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T(IEEE 802.3bz) cabling.

Flexible Radio Assignment

Allows the access points to intelligently determine the operating mode of serving radios based on the RF environment. The access points can operate in the following modes:

  2.4-GHz and 5-GHz mode: One radio serves clients in 2.4-GHz mode, while the other serves clients in 5-GHz mode
  Dual 5-GHz mode: Both radios inside the access point operate on the 5-GHz band, maximizing the benefits of 802.11ac Wave 2 and increasing client device capacity
  Wireless Security Monitoring and 5-GHz mode: One radio serves 5-GHz clients while the other is scanning the full spectrum for attackers, RF interference, and rogue devices

Dual 5-GHz radio support

Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps) over-the-air speed while increasing client capacity.

Smart antenna connector

An intelligent second physical antenna connector is included on 3800 Series models with an external antenna. This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeteria, and arenas/stadiums, allowing two sets of antennas to be connected and active on a single access point.

Modular architecture

Second-generation modular architecture first introduced by the 3600 Series access points. New side-mount connection allows companies to add and remove modules as needed without having to dismount the access point from the ceiling, further simplifying the customer’s time and dollars when performing network upgrades.

The new side-mount architecture allows for additional flexibility in the form factor of a 3800 Series module, and in the choice of solutions with integrated or even external antennas of their own.

We have doubled the amount of power available to 3800 Series modules from 9W to 18W, broadening the potential module applications and solutions.

160-MHz channel support

Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the industry’s best-performing wireless network.

Zero-impact Application Visibility and Control*

Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco Application Visibility and Control.

Cisco ClientLink 4.0

Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets.

Cisco CleanAir 160 MHz*

Cisco CleanAir technology, enhanced with 160-MHz channel support, provides proactive, high-speed spectrum intelligence across 20-, 40-, 80-, and 160-MHz-wide channels to combat performance problems due to wireless interference.

Cross-access point noise reduction

A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.

Optimized access point roaming

Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available.

Automatic link aggregation (LAG) support

802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point.

Cisco Mobility Express

Flexible deployment mode through the Cisco Mobility Express solution is ideal for high density environments and can support up to 100 access points. Easy setup allows the 3800 Series access points to be deployed on networks without a physical controller.

Apple Features

Apple and Cisco have responded to this challenge by partnering to create an optimal mobile experience for iOS devices on corporate networks based on Cisco® technologies. Specifically, using new features in iOS 10 in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications.

At the center of the collaboration is a unique handshake between Cisco WLAN and Apple devices. This handshake enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device.

802.11ac Wave 2 and beyond

The Aironet 3800 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and high-performance laptops, providing a greater end-user experience. Whether your project involves wholesale changes to your current wireless network or upgrading your legacy Wi-Fi deployments (802.11a/b/g/n/ac Wave 1 deployments), the Aironet 3800 Series can handle the job.

The Aironet 3800 Series supports 802.11ac Wave 2, providing a theoretical connection rate of up to 5.2 Gbps—that’s roughly four times the rate offered by today’s high-end 802.11ac access points. The boost helps you stay ahead of the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.

Cisco DNA support

Pairing the 3800 Series access points with the Cisco Digital Network Architecture (Cisco DNA) allows for a total network transformation. Cisco DNA allows you to truly understand your network with real-time analytics, quickly detect and contain security threats, and easily provide networkwide consistency through automation and virtualization. By decoupling network functions from the hardware, you can build and manage your entire wired and wireless network from a single user interface.

Working together, the 3800 Series and Cisco DNA offer such features as:

   Flexible Radio Assignment

   Cisco Connected Mobile Experiences

   Cisco High Density Experience

   Apple FastLane

   Cisco Identity Services Engine

   And much more

The result? Your network stays relevant, becomes digital-ready, and is the lifeblood of your organization.

High-density experience

Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 3800 Series Access Points run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 3800 Series is part of Cisco’s flagship portfolio of 802.11ac-enabled access points, delivering a robust mobility experience. It features 802.11ac Wave 2 with 4x4 MU-MIMO technology supporting three spatial streams. MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.

With two radios built into each access point, the Aironet 3800 Series is more versatile than any access point currently on the market. These radios are outfitted with Flexible Radio Assignment, which means that the access points automatically self-optimize to better serve the environment. For example, one of the radios broadcasts its signal on the 5-GHz channel and the other sends out a 2.4-GHz signal. The access point understands the wireless environment and will automatically switch the 2.4-GHz signal to a 5-GHz signal, increasing the reliability of your customers’ Wi-Fi use. This setting automatically works in reverse too: the access point can recognize that the RF environment has changed and revert back to its original configuration.

The 3800 Series also dynamically changes the radio settings based on the wireless environment. The access point will allow one of the radios to operate in Wireless Security Monitoring mode, allowing you to detect wireless security threats and interference and combat rogue access. This valuable information can be culled in an easy-to-understand matrix to inform you about your wireless users. Flexible Radio Assignment also allows you to convert a radio into Wireless Service Assurance mode, providing proactive health monitoring of the network.

   Optimized access point roaming helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available

   Cisco ClientLink 4.0 improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac. At the same time, the technology improves battery life on mobile devices

   Cisco CleanAir is technology enhanced with 160-MHz channel support. It delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-, and 160-MHz-wide channels to combat performance problems due to wireless interference

   MIMO equalization capabilities optimize uplink performance and reliability by reducing the impact of signal fade

   Apple roaming features such as 802.11r Fast Transition, 802.11v BSS Transition, and Assisting Roaming enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices

Modular architecture

The 3800 Series carries forward the modular architecture first introduced with the Aironet 3600 Series, providing unparalleled investment protection for forward-looking modular solutions. The 3800 Series delivers an enhanced second-generation modular architecture in the following ways:

   Moving the module connection from the bottom to the side of the access point. This allows for easier addition and removal of a module without having to dismount the access point and also allows for flexibility in module design with respect to size and appropriate antenna placement

   Increasing the power available to a module to 18W, providing additional flexibility for future module solutions

   The Cisco Aironet Developer Platform framework works in tandem with the Aironet 3800 Series as the perfect solution, allowing your network to work for you. Modularity brings intent-based networking to the edge, customizing your ability to tackle new use cases and emerging technology standards, so that your deployments are ready for the future. The Cisco Aironet Developer Platform program transforms the access point into a powerful development platform for mobility and IoT convergence.

   The Cisco Beacon Point Module is the virtual beacon solution that is leading the way in the indoor location-based services space. Cisco technology brings both easy deployment and superior location accuracy to the industry. All it takes to move a virtual beacon is a mouse click and technologies that can identify assets from 1 to 3 meters away. The Cisco Beacon Point Module is the perfect add-on to augment your Cisco Aironet 3800 Series Access Point and will strengthen your wireless network. This solution is well suited to industries such as retail (properly engage customers), healthcare (accurately track assets), and offices (optimize workspaces).

As wireless LAN continues to grow as the dominant method of connecting to private and public networks, the access point becomes a perfect integration point into an enterprise corporate network or carrier service network for a wide variety of solutions. Companies can use a single Ethernet cable drop from their wired network to provide high-speed network access and also typically for Power over Ethernet (PoE) to the access point and solutions that are integrated with and interconnected through the 3800 Series access points.

Product specifications

Item

Specification

Software and supported wireless LAN controllers

  Cisco Unified Wireless Network Software Release 8.2.111.0 or later
  Cisco IOS® XE Software Release 16.3
  Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
  Cisco Catalyst 3850 Series and 3650 Series Switches
  Cisco Mobility Express

802.11n version 2.0 (and related) capabilities

  4x4 MIMO with three spatial streams
  Maximal Ratio Combining (MRC)
  802.11n and 802.11a/g beamforming
  20- and 40-MHz channels
  PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11ac Wave 1 capabilities

  4x4 MIMO with three spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, and 80-MHz channels
  PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  802.11 DFS
  CSD support

802.11ac Wave 2 capabilities

  4x4 MU-MIMO with three spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, 80, 160-MHz channels
  PHY data rates up to 5.2 Gbps
  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  802.11 DFS
  CSD support

Wi-Fi Alliance Certified

  Wi-Fi Certified a, b, g, n, ac
  Wi-Fi Vantage
  WMM
  Passpoint

Integrated antenna

Flexible radio (either 2.4 GHz or 5 GHz)

  2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
  5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

  5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately)

  3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
  3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR‑ANT2513-P4M-N= antenna
  Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

Smart Antenna Connector

  Available on the 3802e Series and 3802p Series access points only
  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
  Required when running the flexible radio as either a:
   Second 5-GHz serving radio
   Wireless Security Monitoring radio

Interfaces

   2 Ethernet ports
   100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
   CAT 5e cabling
   Higher-quality 10GBASE-T (CAT 6/6a) cabling
   100/1000BASE-T autosensing (RJ-45 - AUX port)
   Management console port (RJ-45)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H)

  Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)

Weight

  4.6 lb (2.09 kg)

Input power requirements

  802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®)
  802.3at power injector (AIR-PWRINJ6=)
  50W power supply (AIR-PWR-50=)

Power draw

  25.8W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port
  30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled

Environmental

Cisco Aironet 3800i

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
  Operating temperature: 32° to 104°F (0° to 40°C)
  Operating humidity: 10% to 90% percent (noncondensing)
  Operating altitude test: 40˚C, 9843 ft.

Cisco Aironet 3800e

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
  Operating temperature: -4° to 122°F (-20° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)
  Operating altitude test: 40˚C, 9843 ft.

Cisco Aironet 3800p

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
  Operating temperature: -4° to 122°F (-20° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)

Operating altitude test: 40˚C, 9843 ft.

System memory

  1024 MB DRAM
  256 MB flash

Available transmit power settings

2.4 GHz

  23 dBm (200 mW)
  20 dBm (100 mW)
  17 dBm (50 mW)
  14 dBm (25 mW)
  11 dBm (12.5 mW)
  8 dBm (6.25 mW)
  5 dBm (3.13 mW)
  2 dBm (1.56 mW)

5 GHz

  23 dBm (200 mW)
  20 dBm (100 mW)
  17 dBm (50 mW)
  14 dBm (25 mW)
  11 dBm (12.5 mW)
  8 dBm (6.25 mW)
  5 dBm (3.13 mW)
  2 dBm (1.56 mW)

Maximum number of nonoverlapping channels

2.4 GHz

  802.11b/g:
   20 MHz: 3
  802.11n:
   20 MHz: 3

5 GHz

  802.11a:
   20 MHz: 25 FCC, 16 EU
  802.11n:
   20 MHz: 25 FCC, 16 EU
   40 MHz: 12 FCC, 7 EU
  802.11ac:
   20 MHz: 25 FCC, 16 EU
   40 MHz: 12 FCC, 7 EU
   80 MHz: 6 FCC, 3 EU
   160 MHz 2 FCC, 1 EU

Compliance standards

   UL 60950-1
   CAN/CSA-C22.2 No. 60950-1
   UL 2043
   IEC 60950-1
   EN 60950-1
   EN 50155 for 3800e (Operating temperature -20° to 50°C)
  Radio approvals:
   FCC Part 15.107, 15.109, 15.247, 15.407, 14-30
   RSS-247 (Canada)
   EN 300.328, EN 301.893 (Europe)
   ARIB-STD 66 (Japan)
   ARIB-STD T71 (Japan)
   EMI and susceptibility (Class B)
   ICES-003 (Canada)
   VCCI (Japan)
   EN 301.489-1 and -17 (Europe)
   EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
  IEEE standards:
   IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, 802.11r, 802.11k, 802.11v, 802,11u, 802.11w
   IEEE 802.11ac
  Security:
   802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
   802.1X
   Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
  Extensible Authentication Protocol (EAP) types:
   EAP-Transport Layer Security (TLS)
   EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
   Protected EAP (PEAP) v0 or EAP-MSCHAPv2
   EAP-Flexible Authentication via Secure Tunneling (FAST)
   PEAP v1 or EAP-Generic Token Card (GTC)
   EAP-Subscriber Identity Module (SIM)
  Multimedia:
   Wi-Fi Multimedia (WMM)
  Other:
   FCC Bulletin OET-65C
   RSS-102

 

Warranty

Limited lifetime hardware warranty

Data rates supported

802.11b: 1, 2, 5.5, and 11 Mbps

802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23)

802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23)

802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3)

802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3)

802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3)

802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3)

 

ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
ประเภท Wireless Access Point
Model Aironet 3802
License / Features Lightweight AP
รีวิวสินค้า
รีวิวของลูกค้า (1)
ติดตั้งในโกดัง ดูจนปิดงาน
ราคา
บริการ
งานติดตั้งดี ออกแบบและคุยกับลูกค้าจนปิดงาน Review by ผู้รับเหมา (โพสต์เมื่อ 25/3/2019)
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว: Cisco Aironet 3802 | AIR-AP3802E-S-K9 Aironet 3802e Lightweight AP External antennas, Support 6 dBi
คุณจะให้คะแนนสินค้านี้อย่างไร? *
  1 ดาว 2 ดาว 3 ดาว 4 ดาว 5 ดาว
บริการ
ราคา