- หน้าหลัก
- EOL (สินค้ายกเลิกการผลิต)
- Catalyst 2960-X Switch
- Cisco Catalyst 2960-X | WS-C2960X-48LPS-L Catalyst 2960X 48 port 10/100/1000 PoE+ 370W, 4 x 1G SFP, LAN Base
 
 
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst 2960-X | WS-C2960X-48LPS-L Catalyst 2960X 48 port 10/100/1000 PoE+ 370W, 4 x 1G SFP, LAN Base
| Band: | Cisco | 
| Type: | Switch / Hub | 
| Model: | Catalyst 2960-X | 
| Part Number: | WS-C2960X-48LPS-L | 
| Features: | LAN Base | 
| Detail: | WS-C2960X-48LPS-L | Catalyst 2960X 48 port 10/100/1000 PoE+ 370W, 4 x 1G SFP, LAN Base | 
- 
                
                      
- 
                
                     GLC-SX-MMD SFP 1000BASE-SX, MMF, 550m Distance฿9,500.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด GLC-SX-MMD SFP 1000BASE-SX, MMF, 550m Distance฿9,500.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
- 
                
                      
- 
                
                      
- 
                
                     GLC-LH-SMD SFP 1000BASE-LH, SMF, 10km Distance฿18,900.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด GLC-LH-SMD SFP 1000BASE-LH, SMF, 10km Distance฿18,900.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
- 
                
                      
- 
                
                      
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- การรับประกัน
- การจัดส่ง
- การชำระเงิน
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
Cisco Catalyst 2960-X Series PoE and PoE+ power capacity
| Model | Maximum number of PoE+ (IEEE 802.3at) ports* | Maximum number of PoE (IEEE 802.3af) ports* | Available PoE power (single PS source) | 
| Cisco Catalyst 2960X-48FPD-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W | 
| Cisco Catalyst 2960X-48LPD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W | 
| Cisco Catalyst 2960X-24PD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W | 
| Cisco Catalyst 2960X-48FPS-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W | 
| Cisco Catalyst 2960X-48LPS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W | 
| Cisco Catalyst 2960X-24PS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W | 
| Cisco Catalyst 2960X-24PSQ-L | 3 ports up to 30W | 7 ports up to 15.4W | 110W | 
Cisco Catalyst 2960-X Series LAN Lite and LAN Base scalability
| Resource | LAN Lite (default) | LAN Base (default) | 
| Unicast MAC addresses | 16,000 | 16,000 | 
| ARP Entries | 8000 | 8000 | 
| IPv4 unicast direct routes | 320 | 2000 | 
| IPv4 unicast indirect routes | 32 | 1000 | 
| IPv6 unicast direct routes | 256 | 2000 | 
| IPv6 unicast indirect routes | 0 | 1000 | 
| IPv4 multicast routes and IGMP groups | 1000 | 1000 | 
| IPv6 multicast groups | 1000 | 1000 | 
| IPv4 QoS ACEs | 384 | 500 | 
| IPv6 QoS ACEs | 256 | 500 | 
| IPv4 security ACEs | 256 | 600 | 
| IPv6 Security ACEs | 256 | 600 | 
Cisco Catalyst 2960-X Series hardware
| Hardware specifications | |
| Flash memory | 128 MB for LAN Base and IP Lite SKUs, 64 MB for LAN Lite SKUs | 
| DRAM | 512 MB for LAN Base and 256 MB for LAN Lite | 
| CPU | APM86392 600 MHz dual core | 
| Console ports | USB (Type B), Ethernet (RJ-45) | 
| Storage interface | USB (Type A) for external flash storage | 
| Network management interface | 10/100 Mbps Ethernet (RJ-45) | 
Cisco Catalyst 2960-X Series performance
| Performance and scalability | ||
| 
 | 2960-X LAN Lite | 2960-X LAN Base | 
| Forwarding bandwidth | 50 Gbps | 108 Gbps | 
| Switching bandwidth* | 100 Gbps | 216 Gbps | 
| 64 | 1023 | |
| 4096 | 4096 | |
| 9198 bytes | 9198 bytes | |
| 9216 bytes | 9216 bytes | |
Cisco Catalyst 2960-X Series forwarding performance
| Forwarding rate: 64-byte Layer 3 packets | |
| 2960-X models | |
| Cisco Catalyst 2960X-48FPD-L | 130.9 Mpps | 
| Cisco Catalyst 2960X-48LPD-L | 130.9 Mpps | 
| Cisco Catalyst 2960X-24PD-L | 95.2 Mpps | 
| Cisco Catalyst 2960X-48TD-L | 130.9 Mpps | 
| Cisco Catalyst 2960X-24TD-L | 95.2 Mpps | 
| Cisco Catalyst 2960X-48FPS-L | 107.1 Mpps | 
| Cisco Catalyst 2960X-48LPS-L | 107.1 Mpps | 
| Cisco Catalyst 2960X-24PS-L | 71.4 Mpps | 
| Cisco Catalyst 2960X-24PSQ-L | 71.4 Mpps | 
| Cisco Catalyst 2960X-48TS-L | 107.1 Mpps | 
| Cisco Catalyst 2960X-24TS-L | 71.4 Mpps | 
| Cisco Catalyst 2960X-48TS-LL | 104.2 Mpps | 
| Cisco Catalyst 2960X-24TS-LL | 68.5 Mpps | 
Cisco Catalyst 2960-X Series mechanical specifications
| Model | Dimensions | Weight | ||
| Inches (H x D x W) | Centimeters (H x D x W) | Pounds | Kilograms | |
| WS-C2960X-48FPD-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.9 | 5.8 | 
| WS-C2960X-48LPD-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.9 | 5.8 | 
| WS-C2960X-48TD-L | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 9.6 | 4.3 | 
| WS-C2960X-24PD-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.7 | 5.7 g | 
| WS-C2960X-24TD-L | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 8.9 | 4.0 | 
| WS-C2960X-48FPS-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.9 | 5.8 | 
| WS-C2960X-48LPS-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.9 | 5.8 | 
| WS-C2960X-48TS-L | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 9.4 | 4.2 | 
| WS-C2960X-24PS-L | 1.75 x 14.5 x 17.5 | 4.5 x 36.8 x 44.5 | 12.8 | 5.8 | 
| WS-C2960X-24PSQ-L | 1.73 x 11.03 x 17.5 | 4.45 x 28.0 x 44.5 | 12.8 | 5.8 | 
| WS-C2960X-24TS-L | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 8.9 | 4.0 | 
| WS-C2960X-48TS-LL | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 8.9 | 4.0 | 
| WS-C2960X-24TS-LL | 1.75 x 11.0 x 17.5 | 4.5 x 27.9 x 44.5 | 8.2 | 3.7 | 
Cisco Catalyst 2960-X Series environmental specifications
| Environmental ranges | |||||
| 
 | Fahrenheit | Centigrade | |||
| Operating temperature up to 5000 ft (1500 m) | 23º to 113ºF | -5º to 45ºC | |||
| Operating temperature up to 10,000 ft (3000 m) | 23º to 104ºF | -5º to 40ºC | |||
| Short-term exception at sea level* | 23º to 131ºF | -5º to 55ºC | |||
| Short-term exception up to 5000 feet (1500 m)* | 23º to 122ºF | -5º to 50ºC | |||
| Short-term exception up to 10,000 feet (3000 m)* | 23º to 113ºF | -5º to 45ºC | |||
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF | -5º to 40ºC | |||
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF | -25º to 70ºC | |||
| 
 | Feet | Meters | |||
| Operating altitude | Up to 10,000 | Up to 3000 | |||
| Storage altitude | Up to 13,000 | Up to 4000 | |||
| Operating relative humidity | 10% to 95% noncondensing | ||||
| Storage relative humidity | 10% to 95% noncondensing | ||||
| Acoustic noise | |||||
| Measured per ISO 7779 and declared per ISO 9296. PoE output of 185W or less where applicable. | |||||
| Bystander positions operating mode at 77°F (25°C) ambient. | |||||
| Model | Sound pressure | Sound power | |||
| LpA (typical) | LpAD (maximum) | LwA (typical) | LwAD (maximum) | ||
| Cisco Catalyst 2960X-48FPD-L Cisco Catalyst 2960X-48LPD-L Cisco Catalyst 2960X-24PD-L | 39 dB | 43 dB | 4.9 B | 5.3 B | |
| Cisco Catalyst 2960X-48TD-L Cisco Catalyst 2960X-24TD-L | 42 dB | 46 dB | 5.1 B | 5.5 B | |
| Cisco Catalyst 2960X-48FPS-L Cisco Catalyst 2960X-48LPS-L Cisco Catalyst 2960X-24PS-L | 39 dB | 43 dB | 4.9 B | 5.3 B | |
| Cisco Catalyst 2960X-24PSQ-L | N/A | N/A | N/A | N/A | |
| Cisco Catalyst 2960X-48TS-L Cisco Catalyst 2960X-24TS-L | 42 dB | 46 dB | 5.1 B | 5.5 B | |
| Cisco Catalyst 2960X-48TS-LL Cisco Catalyst 2960X-24TS-LL | 42 dB | 46 dB | 5.1 B | 5.5 B | |
| Predicted reliability | |||||
| Model | MTBF in hours** | ||||
| Cisco Catalyst 2960X-48FPD-L | 233,370 | ||||
| Cisco Catalyst 2960X-48LPD-L | 277,960 | ||||
| Cisco Catalyst 2960X-24PD-L | 325,780 | ||||
| Cisco Catalyst 2960X-48TD-L | 445,460 | ||||
| Cisco Catalyst 2960X-24TD-L | 569,520 | ||||
| Cisco Catalyst 2960X-48FPS-L | 232,610 | ||||
| Cisco Catalyst 2960X-48LPS-L | 276,870 | ||||
| Cisco Catalyst 2960X-24PS-L | 324,280 | ||||
| Cisco Catalyst 2960X-24PSQ-L | 462,680 | ||||
| Cisco Catalyst 2960X-48TS-L | 442,690 | ||||
| Cisco Catalyst 2960X-24TS-L | 564,910 | ||||
| Cisco Catalyst 2960X-48TS-LL | 476,560 | ||||
| Cisco Catalyst 2960X-24TS-LL | 622,350 | ||||
| Cisco Catalyst 2960X-STACK | 17,128,090 | ||||
| PWR-C2-250WAC | 1,000,000 | ||||
| PWR-C2-640WAC | 1,000,000 | ||||
| PWR-C2-1025WAC | 1,000,000 | ||||
Connectors and interfaces
| Connectors and interfaces | 
| Ethernet interfaces | 
| ●  10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling ●  100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling ●  1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling ●  1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling | 
| SFP and SFP+ interfaces | 
| For information about supported SFP and SFP+ modules, refer to the Transceiver Compatibility matrix tables at cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html. | 
| Indicator LEDs | 
| ●  Per-port status: Link integrity, disabled, activity, speed, and full duplex ●  System status: System, RPS, stack link status, link duplex, PoE, and link speed | 
| Stacking interfaces | 
| Cisco Catalyst 2960-X and 2960-XR Series FlexStack-Plus and FlexStack-Extended (hybrid module only) stacking cables: ●  CAB-STK-E-0.5M stacking cable with a 0.5 m length ●  CAB-STK-E-1M stacking cable with a 1.0 m length ●  CAB-STK-E-3M stacking cable with a 3.0 m length | 
| Console | 
| Cisco Catalyst 2960-X and 2960-XR Series console cables: ●  CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 ●  CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors | 
| Power | 
| ●  The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC ●  Use the supplied AC power cord to connect the AC power connector to an AC power outlet ●  The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch ●  Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle | 
| ประเภท | Switch / Hub | 
|---|---|
| Model | Catalyst 2960-X | 
| Switch Type | LAN Access Switches | 
| Switch Layer | 2 | 
| License / Features | LAN Base | 
| 10/100 Ethernet Down-link Ports | ไม่ | 
| 10/100/1000 Ethernet Down-link Ports | 48 Port | 
| SFP 10/100 Down-Links | N/A | 
| SFP 1G Down-Links | ไม่ | 
| SFP+ Down-Links | ไม่ | 
| SFP / SFP+ Down-Links | ไม่ | 
| Uplink Interfaces | 4x 1G SFP | 
| Switching capacity | 216 Gbps | 
| Redundant Power Supply | ไม่ | 
| Stack | Support | 
| Stacking Bandwidth | 80 Gbps | 
| PoE Support | Support | 
| Available PoE Power | 370W | 
| PoE+ 30W (IEEE 802.3at) Ports | 12 Port | 
| PoE 15.4W (IEEE 802.3af) Ports | 24 Port | 
 
                        
![[WS-C2960X-48LPS-L] Catalyst 2960X 48 port 10/100/1000 POE+ 370W, 4 x 1G SFP, LAN Base [WS-C2960X-48LPS-L] Catalyst 2960X 48 port 10/100/1000 POE+ 370W, 4 x 1G SFP, LAN Base](https://thaiitstore.com/media/catalog/product/cache/1/image/363x/8c4c821123cacd4e53e1ea39887fc156/c/i/cisco-catalyst-ws-c2960x-48lps-l.jpg) 
            ![[WS-C2960X-48LPS-L] Catalyst 2960X 48 port 10/100/1000 POE+ 370W, 4 x 1G SFP, LAN Base](https://thaiitstore.com/media/catalog/product/cache/1/thumbnail/65x/040ec09b1e35df139433887a97daa66f/c/i/cisco-catalyst-ws-c2960x-48lps-l.jpg) 
                                                    
 About Thaiitstore.com
    About Thaiitstore.com