คุณยังไม่มีสินค้าในรถเข็น
![Cisco Catalyst 3650 48 Port PoE 2x10G Uplink IP Base [WS-C3650-48PD-S]](https://thaiitstore.com/media/catalog/product/cache/1/image/650x/8c4c821123cacd4e53e1ea39887fc156/c/i/cisco-ws-c3650-48pd-s-2.jpg "Cisco Catalyst 3650 48 Port PoE 2x10G Uplink IP Base [WS-C3650-48PD-S]")
![Cisco Catalyst 3650 48 Port PoE 2x10G Uplink IP Base [WS-C3650-48PD-S]](https://thaiitstore.com/media/catalog/product/cache/1/image/650x/8c4c821123cacd4e53e1ea39887fc156/c/i/cisco-ws-c3650-48pd-s-1.jpg)
![Cisco Catalyst 3650 48 Port PoE 2x10G Uplink IP Base [WS-C3650-48PD-S]](https://thaiitstore.com/media/catalog/product/cache/1/image/650x/8c4c821123cacd4e53e1ea39887fc156/c/i/cisco-ws-c3650-48pd-s-3.jpg)
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst 3650 | WS-C3650-48PD-S Cisco Catalyst 3650 48 Port, PoE+ 390W, 2x10G SFP+, IP Base
SKU:
WS-C3650-48PD-S
| Band: | Cisco |
| Type: | Switch / Hub |
| Model: | Catalyst 3650 |
| Part Number: | WS-C3650-48PD-S |
| Features: | IP Base |
| Detail: | WS-C3650-48PD-S | Cisco Catalyst 3650 48 Port, PoE+ 390W, 2x10G SFP+, IP Base |
฿0.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
สินค้าที่เกี่ยวข้อง
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
.
รายละเอียดสินค้า
รายละเอียด
Product Overview
● Integrated wireless controller capability with:
◦ Up to 40G of wireless capacity per switch (48-port models)
◦ Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)
● 24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports
● 24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE[1]
● Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight 10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports
● 24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow depth cabinets in enterprise, retail, and branch-office environments
● Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput
● Dual redundant, modular power supplies and three modular fans providing redundancy[2]
● Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy
● Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor
● Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor
● IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6
● IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time synchronization and quality of service (QoS)
● Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9, and enhanced security features
● Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features
● Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support
Cisco Catalyst 3650 Series Configurations
|
Models |
Fixed Uplinks |
Total 10/100/1000 Ethernet Ports |
Default AC Power Supply |
Available PoE Power |
|
WS-C3650-24TS |
4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP) |
24 |
250 WAC |
- |
|
WS-C3650-48TS |
48 |
|||
|
WS-C3650-24PS |
24 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-48PS |
48 PoE+ |
|||
|
WS-C3650-48FS |
48 PoE+ |
1025 WAC |
775 W |
|
|
WS-C3650-24TD |
2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP |
24 |
250 WAC |
|
|
WS-C3650-48TD |
48 |
|
|
|
|
WS-C3650-24PD |
24 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-24PDM |
24 PoE+ |
Fixed 640 WAC |
390 W |
|
|
WS-C3650-48PD |
48 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-48FD |
48 PoE+ |
1025 WAC |
775 W |
|
|
WS-C3650-8X24PD |
|
24 PoE+ (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
715 WAC |
435 W |
|
WS-C3650-12X48FD |
|
48 PoE+ (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
WS-C3650-48TQ |
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP |
48 |
250 WAC |
|
|
WS-C3650-48PQ |
48 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-48FQ |
48 PoE+ |
1025 WAC |
775 W |
|
|
WS-C3650-48FQM |
48 PoE+ |
Fixed 975 WAC |
775 W |
|
|
WS-C3650-8X24UQ |
24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
820 W |
|
|
WS-C3650-12X48UQ |
48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
|
WS-C3650-12X48UR |
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
WS-C3650-12X48UZ |
2 x 40 Gigabit Ethernet with QSFP+ |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase: ● Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP) ● Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP ● Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP ● Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP ● Two 40 Gigabit Ethernet with QSFP+ The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options. 1 and 10 Gigabit Fixed Uplink Configurations Interface Options Fixed Uplink Ports 10 Gigabit Ethernet SFP+ Ports Gigabit Ethernet SFP Ports 4 x Gigabit Ethernet fixed uplink ports 0 4 4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports 2 0 0 4 2 2 4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports 4 0 0 4 2 2 3 1 1 3 8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports 8 0 0 8 Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports Dual Redundant Modular Power Supplies and External RPS2300 The Cisco Catalyst 3650 Series Switches support dual redundant power supplies (see Figure 2). The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in power supply bay 1. The switch also ships with three field-replaceable fans. Models Default Power Supply Available PoE Power Support Secondary Power Supply 24-port data switch PWR-C2-250WAC - Yes 48-port data switch Yes 24-port PoE switch PWR-C2-640WAC 390 W Yes 48-port PoE switch Yes 48-port full PoE switch PWR-C2-1025WAC 775 W Yes 24-port mini PoE switch Fixed 640 WAC 390W No, but supports RPS 2300 48-port mini PoE switch Fixed 975 WAC 775W No, but supports RPS 2300 24-port Multigigabit PoE switch PWR-C1-715WAC 435 W Yes 24-port Multigigabit UPOE switch PWR-C1-1100WAC 820 W Yes 48-port Multigigabit full PoE switch 48-port Multigigabit UPOE switch 660 W Yes Available PoE with DC Power Supply Model Number of DC Power Supplies Total Available PoE Budget 24-port or 48-port PoE Switch (non-multigigabit) 1 390 W 2 780 W 24-port PoE Switch (Multigigabit) 1 160 W 2 600 W 48-port PoE Switch (Multigigabit) 1 0 W 2 440 W Power over Ethernet Plus (PoE+) Minimum Power Supply Requirements for Full PoE and PoE+ 24-Port PoE Switch 48-Port PoE Switch PoE on All Ports One PWR-C2-640 WAC One PWR-C2-1025WAC or Two PWR-C2-640 WAC PoE+ on All Ports One PWR-C2-1025WAC or Two PWR-C2-640 WAC Two PWR-C2-1025 WAC Cisco Universal Power over Ethernet (Cisco UPOE) Cisco UPOE is a breakthrough technology, offering the following services and benefits: ● 60W per port to enable a variety of end devices such as Samsung VDI client, BT IP turret systems in trading floors, Cisco Catalyst compact switches in retail and hospitality environments, personal Cisco TelePresence® systems, and physical access control devices ● High availability for power and guaranteed uninterrupted services, a requirement for critical ● Lower OpEx by providing network resiliency at lower cost by consolidating backup power into ● Faster deployment of new campus access networking infrastructures by eliminating the need for a power outlet for every endpoint The Cisco UPOE capability is available only on select multigigabit models. Power Supply Requirements for Cisco UPOE 24-Port Multigigabit Cisco UPOE Switch 48-Port Multigigabit Cisco UPOE Switch Cisco UPOE (60W per port) on all One 1100W and one 715W power supplies or two 1100W power supplies Two 1100W power supplies Switch Performance Cisco Catalyst 3650 Performance Specifications Performance Numbers for All Switch Models Switching capacity 176 Gbps on 48-port models (non-multigigabit models) 92 Gbps on 24-port models (non-multigigabit models) 254 Gbps on 24-port Multigigabit models with 2x10G uplink 272 Gbps on 24-port Multigigabit models with 4x10G uplink 392 Gbps on 48-port Multigigabit models with 4x10G uplink 472 Gbps on 48-port Multigigabit models with 8x10G uplink 472 Gbps on 48-port Multigigabit models with 2x40G uplink Stacking bandwidth 160 Gbps Total number of MAC addresses 32,000 Total number of IPv4 routes (ARP plus learned routes) 24,000 FNF entries 48,000 flow on 48-port models 24,000 flows on 24-port models DRAM 4 GB Flash 2 GB (non-Multigigabit models) and 4GB (Multigigabit models) VLAN IDs 4,094 Total switched virtual interfaces (SVIs) 1,000 Jumbo frame 9198 bytes Total routed ports per 3650 stack 208 Wireless Number of access points per switch/stack 25 Number of wireless clients per switch/stack 1000 Total number of WLANs per switch 64 Wireless bandwidth per switch Up to 40 Gbps on 48-port models Up to 20 Gbps on 24-port models Supported Aironet access point series 3700, 3600, 3500, 2600, 1600, 1260, 1140, 1040 Forwarding Rate of Switch Models Model Forwarding Rate 4 x 1 Gigabit Ethernet Uplink-Models 3650-24TS 41.66 Mpps 3650-24PS 3650-48TS 77.37 Mpps 3650-48PS 3650-48FS 2 x 10 Gigabit Ethernet Uplink-Models 3650-24TD 3650-24PD 3650-24PDM 68.45 Mpps 3650-48TD 3650-48PD 3650-48FD 104.16 Mpps 3650-8X24PD 172.61 Mpps 3650-12X48FD 261.90 Mpps 4 x 10 Gigabit Ethernet Uplink-Models 3650-48TQ 3650-48PQ 3650-48FQ 3650-48FQM 130.95 Mpps 3650-8X24UQ 202.38 Mpps 3650-12X48UQ 291.66 Mpps 8 x 10 Gigabit Ethernet Uplink-Models 3650-12X48UR 351.19 Mpps 2 x 40 QSFP+ Uplink-Models 3650-12X48UZ 351.19 Mpps MTBF MTBF Hours WS-C3650-24T 661,800 WS-C3650-24P 528,280 WS-C3650-8X24PD 335,930 WS-C3650-8X24UQ 233,780 WS-C3650-24PDM 304,860 WS-C3650-48T 527,580 WS-C3650-48P 383,760 WS-C3650-48F 383,760 WS-C3650-12X48FD 227,490 WS-C3650-12X48UQ 203,130 WS-C3650-12X48UR 201,680 WS-C3650-12X48UZ 203,190 WS-C3650-48FQM 272,260 PWR-C2-250WAC 751,642 PWR-C2-640WAC 693,692 PWR-C2-1025WAC 570,259 PWR-C2-640WDC 706,759 PWR-C1-715WAC 664,055 PWR-C1-1100WAC 392,174 FAN-T1 16,661,470 Connectors for Cisco Catalyst 3650 Series Connectors Connectors and cabling Power connectors Management and Standards Support for Cisco Catalyst 3650 Series Switches Standards Support for the Cisco Catalyst 3650 Series Description Specification Standards IEEE 802.1as IEEE 802.1s IEEE 802.1w IEEE 802.11 IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.3bz IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Qat Stream Reservation Protocol IEEE 802.1Qav IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 Power Supply Specifications Power Specifications for Cisco Catalyst 3650 Series Description Specification PWR-C2-1025 WAC PWR-C2-640 WAC PWR-C2-250 WAC PWR-C2-640 WDC WS-C3650-24PDM/WS-C3650-48FQM Switches Power Supply Rated Maximum 1025W 640W 250W 640W 975W Total Output BTU (Note: 1000 BTU per hr = 293 W) 3497 BTU/hr, 1025W 2183 BTU/hr, 640W 853 BTU/hr, 250W 2188 BTU/hr, 640W 3326.8 BTU/hr, 975W Input-Voltage Range and Frequency (Note: ±10% of "Input-Voltage Range”) 115-240VAC, 50-60 Hz 100-240VAC, 50-60 Hz 100-240VAC, 50-60 Hz -36VDC to -72VDC 100-240VAC, 50-60 Hz Input Current 12-6A 8-4A 4-2A 21 - 10.5 A 12-5A Output Ratings 12V @ 20.83A -54V @ 14.6A 12V @ 20.83A -54V @ 7.36A 12V @ 20.83A 12V @ 20.83A -54V @ 7.36A 12V @ 16.66A -54V @ 14.3A Output Holdup Time 10 ms minimum @ 102.5VAC 16.7 ms minimum @ 100VAC 16.7 ms minimum @ 100VAC 2ms@-48VDC 20 ms minimum @ 100VAC Power-Supply Input Receptacles IEC 320-C16 (IEC60320-C16) IEC 320-C16 (IEC60320-C16) IEC 320-C13 (IEC60320-C13) Terminal strip IEC 320-C16 (IEC60320-C16) Power Cord Rating 13A 13A 10A 20A @ 100VDC 15A Physical Specifications (H x W x D): 1.58 X 3.75 X 13.25 in (4.0 x 9.5 x 33.7 cm) Weight: 3.55 lb (1.61 kg) (H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 3.1 lb (1.41 kg) (H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 2.55 lb (1.16 kg) H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 2.75 lb (1.25 kg) N/A Operating Temperature For the operating temperature ranges at various altitudes of AC and DC power supply module powered switches, see Table 1. Storage Temperature -40 to 158°F (-40 to 70°C) Relative Humidity Operating and Nonoperating Noncondensing 5 to 96% noncondensing 5 to 95% noncondensing Altitude 16,400 ft. (5,000 meters) 10,000 ft. (3,000 meters) MTBF Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Issue 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level). EMI and EMC Compliance “AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK Safety Compliance For the operating temperature ranges at various altitudes of AC and DC power supply module powered switches, see Table 1. LED Indicators -40 to 158°F (-40 to 70°C) N/A Description Specification PWR-C1-1100WAC PWR-C1-715WAC Power supply rated maximum 1100W 715W Total output BTU (Note: 1000 BTU/hr = 293W) 3793 BTU/hr, 1100W 2465 BTU/hr, 715W Input-voltage range and frequency 115-240VAC, 50-60 Hz 100-240VAC, 50-60 Hz Input current 12-6A 10-5A Output ratings -56V at 19.64A -56V at 12.8A Output holdup time 10 ms minimum at 102.5VAC 16.7 ms minimum at 100VAC Power-supply input receptacles IEC 320-C16 (IEC60320-C16) IEC 320-C16 (IEC60320-C16) Power cord rating 13A 13A Physical specifications (H x W x D): 1.58 X 3.25 X 13.7 in Weight: 3 lb (1.4 kg) (H x W x D): 1.58 X 3.25 X 12.20 in Weight: 2.8 lb (1.3 kg) Operating temperature 23 to 113°F (-5 to 45°C) Storage temperature -40 to 158°F (-40 to 70°C) Relative humidity operating and nonoperating noncondensing 5 to 90% noncondensing Altitude 10,000 ft. (3000 meters), up to 45°C MTBF Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level). EMI and EMC compliance FCC Part 15 (CFR 47) Class A ICES-003 Class A EN 55022 Class A CISPR 22 Class A AS/NZS 3548 Class A BSMI Class A (AC input models only) VCCI Class A EN 55024, EN300386, EN 50082-1, EN 61000-3-2, EN 61000-3-3 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1 Safety compliance UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking LED indicators “AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK Power Consumptions (in Watts) of Standalone Cisco Catalyst 3650 Series Model Fixed Uplink Power Consumption (Watts) (No More Than) 0% Traffic 10% Traffic 100% Traffic Weighted Average WS-C3650-24TS 4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) 43.9 56.4 57.1 55.21 WS-C3650-48TS 61.1 85.1 86.4 82.85 WS-C3650-24PS 53.8 65.3 65.9 64.18 WS-C3650-48PS 81.4 98.7 99.5 97.09 WS-C3650-48FS 90.8 108.7 109.4 106.98 WS-C3650-24TD 2 x 10 Gigabit Ethernet with SFP+ and 2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP 54.0 60.8 63.0 60.35 WS-C3650-48TD 73.3 90.9 93.9 89.40 WS-C3650-24PD 61.1 68.3 70.1 67.75 WS-C3650-24PDM 63.8 72.3 76.2 71.9 WS-C3650-48PD 80.3 99.1 101.5 97.45 WS-C3650-48FD 88.8 106.5 109.4 105.03 WS-C3650-8X24PD 103 107.8 111.5 107.7 WS-C3650-12X48FD 158.7 168.6 172.7 168 WS-C3650-48TQ 4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP 73.0 91.9 96.7 90.47 WS-C3650-48PQ 86.4 103.4 107.4 102.10 WS-C3650-48FQ 96.6 116.2 120.5 114.69 WS-C3650-48FQM 74.1 89.2 95.8 88.4 WS-C3650-8X24UQ 110.0 115.3 123.3 115.6 WS-C3650-12X48UQ 170.4 179.9 186.6 179.7 WS-C3650-12X48UR 8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP 174.5 184.9 195.7 184.9 WS-C3650-12X48UZ 2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+ (QSFP+) 162.4 173.7 184.0 173.6 Safety and Compliance Information for Cisco Catalyst 3650 Series Description Specification Safety Certifications UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1 Second Edition GOST NOM (obtained by partners and distributors) Electromagnetic Emissions Certifications 47CFR Part 15 (CFR 47) Class A (FCC Part 15 Class A) AS/NZS CISPR22 Class A CISPR22 Class A EN55022 Class A ICES003 Class A VCCI Class A EN61000-3-2 EN61000-3-3 KN22 Class A KCC CNS13438 Class A EN55024 CISPR24 KN24 Environmental Reduction of Hazardous Substances (ROHS) 5 Noise Specifications Office Product Spec: 48dBA at 25°C (refer to ISO 7779) Telco Common Language Equipment Identifier (CLEI) Code Licensing Licensing for Cisco Catalyst 3650 Series Switches The three feature sets available with all Cisco Catalyst 3650 Series Switches are: ● LAN Base: Enterprise access layer 2 switching features ● IP Base: Enterprise access layer 3 switching features ● IP Services: Advanced enterprise layer 3 switching (IPv4 and IPv6) features The LAN Base feature set offers enhanced intelligent services that include comprehensive Layer 2 features, with up to 255 VLANs. The IP Base feature set provides entry-level enterprise services in addition to all LAN Base features, with 4094 VLANs. IP Base also includes the support for wireless controller functionality (mobility agent and mobility controller role; additional access point license required for mobility controller role), routed access, smart operations, FNF, and so on. The IP Services feature set provides full enterprise services that include advanced Layer 3 features such as EIGRP, OSPF, BGP, PIM, and IPv6 routing such as OSPFv3 and EIGRPv6. All software feature sets support advanced security and MQC-based QoS. The Cisco Catalyst 3650 Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3650 Series LAN Base switches. The same applies to IP Base and IP Services as well. A mixed stack of LAN Base switch with IP Base or IP Services feature set is not supported. Customers can transparently upgrade the software feature set in the Cisco Catalyst 3650 Series Switches through Cisco IOS Software CLI using the right to use (RTU)-based software upgrade process. Software activation enables the Cisco IOS Software feature sets. Based on the license’s type, Cisco IOS Software activates the appropriate feature set. License types can be changed, or upgraded, to activate a different feature set. Access Point License for Cisco Catalyst 3650 An access point license is required for Cisco Catalyst 3650 operating in mobility controller mode. No access point license is required for 3650 operating in mobility agent mode. This functionality is included in the IP Base feature set. Other devices that can act as mobility controller are the WLC 5760, WLC 5508, and WiSM2 wireless controllers. Access point licenses can be transferred only between two 3650 switches or between 3650 and 5760 controller and vice versa. Software Policy for Cisco Catalyst 3650 Series Switches Customers with Cisco Catalyst LAN Base and IP Base software feature sets will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier. Customers with licenses for our IP Services software images require a service support contract such as Cisco Smart Net Total Care™ Service to download updates. This policy supersedes any previous warranty or software statement and is subject to change without notice.
Switch Models and Corresponding Default Power Supplies
(15.4 W per port)
(30 W per port)
applications (e911)
the wiring closet
(24-port switch) or max. 29 ports
(48-port switch)
(with power supply)
(with power supply)
● 1000BASE-T ports: RJ-45 connectors, 4-pair Cat-5E UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat-5E UTP cabling
● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, DWDM and CWDM SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
● 10GBASE-SR, LR, LRM, CX1 (v02 or higher) SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
● Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling
● Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling
● Management console port: RJ-45-to-DB9 cable for PC connections
● Customers can provide power to a switch by using the internal power. The connectors are located at the back of the switch
● Internal power supply connector: The internal power supply is an auto-ranging unit. The internal power supply supports input voltages between 100 and 240VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet
ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
| ประเภท | Switch / Hub |
|---|---|
| Model | Catalyst 3650 |
| Switch Type | LAN Core and Distribution Switches |
| Switch Layer | 3 |
| License / Features | IP Base |
| 10/100 Ethernet Down-link Ports | N/A |
| 10/100/1000 Ethernet Down-link Ports | N/A |
| SFP 10/100 Down-Links | N/A |
| SFP 1G Down-Links | N/A |
| SFP+ Down-Links | N/A |
| SFP / SFP+ Down-Links | N/A |
| Uplink Interfaces | N/A |
| Switching capacity | N/A |
| Redundant Power Supply | N/A |
| Stack | N/A |
| Stacking Bandwidth | N/A |
| PoE Support | N/A |
| Available PoE Power | N/A |
| PoE+ 30W (IEEE 802.3at) Ports | N/A |
| PoE 15.4W (IEEE 802.3af) Ports | N/A |
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
About Thaiitstore.com