- หน้าหลัก
- Industrial (สำหรับอุตสาหกรรม)
- Cisco Industrial Ethernet 2000 | IE-2000-4TS-G-B IE 2000 4 FE copper, 2 GE SFP, Base
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Industrial Ethernet 2000 | IE-2000-4TS-G-B IE 2000 4 FE copper, 2 GE SFP, Base
Band: | Cisco |
Type: | Industrial Switch |
Model: | Industrial Ethernet 2000 |
Part Number: | IE-2000-4TS-G-B |
Features: | LAN Base |
Detail: | IE-2000-4TS-G-B | IE 2000 4 FE copper, 2 GE SFP, Base |
-
IE 50W Power Module AC in, 24VDC/1.2A out, non-PoE฿0.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- การรับประกัน
- การจัดส่ง
- การชำระเงิน
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
Product specifications
Description |
Specification |
Hardware |
● 256 MB DRAM with ECC memory ● IEEE 1588v2 FPGA ● 64 MB on-board flash memory ● 1GB removable SD flash memory card (optional) ● Mini-USB connector |
Alarm |
● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay |
Power consumption |
● 4-port downlink models: 9.5-15 W ● 8-port downlink models: 12.5-20 W ● 16-port downlink models: 21-30 W ● 4-port PoE/PoE+ models: 21-30 W (16-port base switch) and 4 PoE/PoE+ power requirement |
Connectors and cabling |
● 100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM SFP- based ports: LC fiber connectors ● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
Dimensions including DIN rail |
● IE-2000 6 ports (copper downlinks) chassis: 5.1”H x 2.95”W x 4.51”D in (130mm H x 74.9mm W x 115mm D) ● IE-2000 6 ports (SFP downlinks) chassis: 5.1“H x 3.15”W x 4.51”D in (130mm H x 80mm W x 115mm D) ● IE-2000 10 ports short chassis: 5.1"H x 3.6"W x 4.51"D (130mm H x 91.4mm W x 115mm D) ● IE-2000 10 ports long chassis: 5.1"H x 3.6"W x 5.26"D (130mm H x 91.4mm W x 134mm D) ● IE-2000 18-20 ports chassis: 5.1"H x 5.0"W x 5.26"D (130mm H x 127mm W x 134mm D) ● PWR-IE50W-AC=: 5.8"H x 2.0"W x 4.4"D (147mm H x 51 mm W x 112mm D) ● PWR-65W-PC-AC=: 5.9 "H x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) ● PWR-65W-PC-DC=: 5.9 "H x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) ● PWR-IE170W-PC-AC=: 5.93 x 3.72 x 5.60 in. (150.6 x 94.5 x 142.2mm) ● PWR-IE170W-PC-DC=: 5.93 x 4.47 x 5.75 in. (150.6 x 113.5 x 145.8mm) |
Weight |
● IE-2000 6 ports chassis: 2.45 lb (1.11 kg) ● IE-2000 6 ports (SFP): 2.69 lb (1.22 kg) ● IE-2000 10 ports short chassis: 2.75 lb (1.25 kg) ● IE-2000 10 ports long chassis: 3.45 lb (1.56 kg) ● IE-2000 18-20 ports chassis: 4.35 lb (1.97 kg) ● PWR-IE50W-AC=: 1.4 lb (0.65 kg) ● PWR-IE50W-AC-IEC=: 1.4 lb (0.65 kg) ● PWR-IE65W-PC-DC=: 2.6 (1.18 kg) ● PWR-IE65W-PC-AC=: 2.7 (1.24 kg) ● PWR-IE170W-PC-AC=: 3.88 pounds (1.76 kg) ● PWR-IE170W-PC-DC=: 3.7 pounds (1.67 kg) |
IE 2000 Series power supplies
Product number |
Wattage |
Rated nominal input operating range |
Supported input voltage operating range |
Power output |
PoE/PoE+ support |
Use case scenario |
PWR-IE170W- PC-AC= |
170W |
AC 100-240V/2.3A 50-60Hz or DC 125-250V/2.1A |
AC 90-264V or DC 106-300V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+ port support in a AC or high DC environment1 |
PWR-IE170W- PC-DC= |
170W |
DC 12-54V/23A |
DC 10.8-60V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+ port support in a DC environment1 |
PWR-IE50W- AC= |
50W |
AC 100-240V/1.25A 50-60Hz or DC 125-250V/1.25A |
AC 90-264V or DC 106-300V |
24VDC/2.1A |
No |
Provides power to main system, not used for PoE in an AC or high DC environment |
PWR-IE50W- AC-IEC= |
50W |
AC 100-240V/1.25A 50-60Hz |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to main system, not used for PoE in DC environment |
PWR-IE65W- PC-AC= |
65W |
AC 100-240V/1.4A 50-60Hz or DC 125-250V/1.0A |
AC 90-264V or DC 106-300V |
54VDC/1.2 A |
Yes |
Supports up to 4 ports PoE or 2 ports PoE+ when used in PoE power input in an AC or high DC environment |
PWR-IE65W- PC-DC= |
65W |
DC 24-48VDC/4.5A |
DC 18-60V |
54VDC/1.2 A |
Yes |
Supports up to 4 ports PoE or 2 ports PoE+ when used in PoE power input in a DC environment |
LAN Lite license |
Baseline features |
Layer 2 switching |
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2) |
Security |
SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session |
Multicast |
IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
Management |
Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog |
Industrial Ethernet |
EtherNet/IP, Profinet v2 |
LAN Base license |
Additional features |
Layer 2 switching |
VTPv3, EtherChannel, Voice VLAN, Flexlink |
Security |
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL) |
Quality of service |
IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS |
Management |
Port-Based DHCP, Storm Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM) |
Industrial Ethernet |
IEEE 1588 PTPv2 |
IPv4 routing |
IPv4 static routing |
IPv6 routing |
IPv6 host support, HTTP over IPv6, SNMP over IPv6 |
Enhanced LAN Base |
Additional features |
Industrial management |
Layer 2 switching with 1:1 static Network Address Translation (NAT) |
IP Lite license |
Additional features |
IPv4 routing |
RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode. |
IPv6 Routing |
IPv6 Static routing, OSPFv3 |
Security |
FIPS 140-2 |
Embedded Event Manager |
EEM feature enabled with IP Lite license |
DNA Essentials |
Additional features |
Cisco DNA Center |
Discovery, topology, inventory, software image management |
Visibility |
DNA assurance, Device 360 |
Day-zero network bring-up automation |
Cisco Network Plug-and-Play application |
Cisco IE 2000 DNA license PIDs
PID |
Description |
IE2000-DNA-E-L |
DNA Essentials license (up to 12 ports) |
IE2000-DNA-E-L-3Y |
DNA Essentials 3 year term license (up to 12 ports) option |
IE2000-DNA-E-L-5Y |
DNA Essentials 5 year term license (up to 12 ports) option |
IE2000-DNA-E-M |
DNA Essentials license (up to 24 ports) |
IE2000-DNA-E-M-3Y |
DNA Essentials 3 year term license (up to 24 ports) option |
IE2000-DNA-E-M-5Y |
DNA Essentials 5 year term license (up to 24 ports) option |
Compliance specifications
Description |
Specification |
Safety certifications |
● UL/CSA 60950-1 ● EN 60950-1 ● CB to IEC 60950-1 (with country deviations) ● NOM to NOM-019-SCF1 (through partners and distributors) ● CE Marking |
Hazard location |
● ANSI/ISA 12.12.01 (Class1, Div2 A-D) *
● EN 60079-0, -15 ATEX Certificate (Class 1, Zone2 A-D) *
* Cabinet enclosure required |
EMC emissions and immunity compliance |
● FCC 47 CFR Part 15 Class A ● EN 55022A Class A ● VCCI Class A ● RoHS compliance ● AS/NZS CISPR 22 Class A, AS/NZS CISPR 24 ● CISPR11 Class A, CISPR22 Class A ● ICES 003 Class A ● KCC -Korea ● CE Marking ● C-Tick (Australia) ● Russia certification ● Brazil certification ● IEC/EN/EN61000-4-2 (Electro Static Discharge), 15kV air/8kV contact ● IEC/EN 61000-4-3 (Radiated Immunity, 10 and 20 V/m) ● IEC/EN 61000-4-4 (Fast Transients - 4kV power line, 4kV data line) ● IEC/EN 61000-4-5 (Surge 2 kV/1 kV) ● IEC/EN 61000-4-6 (Conducted Immunity, 10 V/emf) ● IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity) ● IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity) ● IEC/EN 61000-4-10 (Oscillatory Magnetic Field Immunity) ● IEC/EN 61000-4-11 (AC power Voltage Immunity) ● IEC/EN 61000-4-29 (Voltage Dips Immunity) ● IEC/EN 61000-6-1 (Immunity for Light Industrial Environments) ● IEC/EN 61000-6-2 (Immunity for Industrial Environments) ● IEC/EN 61000-6-4 Class A ● EN 61326 |
Shock and vibration |
● IEC 60068-2-27 (Operational Shock: 30G 11ms, half sine) ● IEC 60068-2-27 (Non-Operational Shock 55-70G, trapezoidal) ● IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Operational Vibration) ● IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Non-operational Vibration) |
Industry standards |
● UL508 ● CSA C22.2 No. 142 ● EN 61131-2 (EMC/EMI, environmental, mechanical) ● Protective coating (specific models only) ● Marine DnV ● Substation KEMA (IEEE 1613, IEC 61850-3) ● Railway EN 50155 (EMI/EMC, environmental, mechanical) ● EN50121-3-2 ● EN50121-4 ● NEMA TS-2 (EMC, environmental, mechanical) ● ABB Industrial IT certification ● IP30 ● ODVA Industrial Ethernet/IP support ● PROFINETv2.3 support |
Corrosive testing |
● ISO-12944-6 ● IEC-60068-2-60 |
Humidity |
● IEC 60068-2-52 (salt fog mist, test Kb) marine environments ● IEC 60068 -2-3 ● IEC 60068-2-30 ● Relative humidity: 5% to 95% non-condensing |
Operating temperature |
● -40C to +70C (vented enclosure - 40 LFM Air Flow) ● -40C to +60C (sealed enclosure – 0 LFM Air Flow) ● -34C to +75C (fan or blower-equipped enclosure – 200 LFM Air Flow) ● -40C to +85C (IEC 60068-2-2 Environmental Type Testing – 16 hours) ● Operational altitude: Up to 15,000 ft |
Storage temperature |
● -40 C to +85 C (storage temperature) ● IEC 60068-2-14 ● Storage altitude: Up to 15,000 ft |
Mean time between failures (MTBF) |
● Mean time between failure: 374,052 hours (42.7 years) |
Warranty |
● Five-year limited warranty on all IE-2000 HW PIDs and all IE Power Supplies defined in table 4 above. See link below for details on warranty |
Management and standards
Description |
Specification |
Specification |
IEEE standards |
● IEEE 802.1D MAC bridges, STP ● IEEE 802.1p Layer 2 COS prioritization ● IEEE 802.1q VLAN ● IEEE 802.1s Multiple Spanning-Trees ● IEEE 802.1w Rapid Spanning-Tree ● IEEE 802.1x Port Access Authentication ● IEEE 802.1AB LLDP ● IEEE 802.3ad Link Aggregation (LACP) ● IEEE 802.3af Power over Ethernet provides up to15.4W DC power to each end device ● IEEE 802.3at Power over Ethernet provides up to25.5W DC power to each end device | ● IEEE 802.3af Power over Ethernet ● IEEE 802.3at Power over Ethernet Plus ● IEEE 802.3ah 100BASE-X SMF/MMF only ● IEEE 802.3x full duplex on 10Base-T ● IEEE 802.3 10BASE-T specification ● IEEE 802.3u 100BASE-TX specification ● IEEE 802.3ab 1000BASE-T specification ● IEEE 802.3z 1000BASE-X specification ● IEEE 1588v2 PTP Precision Time Protocol |
RFC compliance |
● RFC 768: UDP ● RFC 783: TFTP ● RFC 791: IPv4 protocol ● RFC 792: ICMP ● RFC 793: TCP ● RFC 826: ARP ● RFC 854: Telnet ● RFC 951: BootP ● RFC 959: FTP ● RFC 1157: SNMPv1 ● RFC 1901,1902-1907 SNMPv2 ● RFC 2273-2275: SNMPv3 ● RFC 2571: SNMP Management ● RFC 1166: IP Addresses ● RFC 1256: ICMP Router Discovery | ● RFC 1305: NTP ● RFC 1492: TACACS+ ● RFC 1493: Bridge MIB Objects ● RFC 1534 DHCP and BootP interoperation ● RFC 1542: Bootstrap Protocol ● RFC 1643: Ethernet Interface MIB ● RFC 1757: RMON ● RFC 2068: HTTP ● RFC 2131, 2132: DHCP ● RFC 2236: IGMP v2 ● RFC 3376: IGMP v3 ● RFC 2474: DiffServPrecedence ● RFC 3046: DHCP Relay Agent Information Option ● RFC 3580: 802.1x RADIUS ● RFC 4250-4252 SSH Protocol |
Simple network management protocol (SNMP) MIB objects |
● BRIDGE-MIB ● CALISTA-DPA-MIB ● CISCO-ACCESS-ENVMON-MIB ● CISCO-ADMISSION-POLICY-MIB ● CISCO-AUTH-FRAMEWORK-MIB ● CISCO-BRIDGE-EXT-MIB ● CISCO-BULK-FILE-MIB ● CISCO-CABLE-DIAG-MIB ● CISCO-CALLHOME-MIB ● CISCO-CAR-MIB ● CISCO-CDP-MIB ● CISCO-CIRCUIT-INTERFACE-MIB ● CISCO-CLUSTER-MIB ● CISCO-CONFIG-COPY-MIB ● CISCO-CONFIG-MAN-MIB ● CISCO-DATA-COLLECTION-MIB ● CISCO-DHCP-SNOOPING-MIB ● CISCO-ENTITY-ALARM-MIB ● CISCO-ENTITY-VENDORTYPE-OID-MIB ● CISCO-ENVMON-MIB ● CISCO-ERR-DISABLE-MIB ● CISCO-FLASH-MIB ● CISCO-FTP-CLIENT-MIB ● CISCO-IF-EXTENSION-MIB ● CISCO-IGMP-FILTER-MIB ● CISCO-IMAGE-MIB ● CISCO-IP-STAT-MIB ● CISCO-LAG-MIB ● CISCO-LICENSE-MGMT-MIB ● CISCO-MAC-AUTH-BYPASS-MIB ● CISCO-MAC-NOTIFICATION-MIB ● CISCO-MEMORY-POOL-MIB ● CISCO-PAE-MIB ● CISCO-PAGP-MIB ● CISCO-PING-MIB ● CISCO-PORT-QOS-MIB ● CISCO-PORT-SECURITY-MIB ● CISCO-PORT-STORM-CONTROL-MIB ● CISCO-PRIVATE-VLAN-MIB ● CISCO-PROCESS-MIB ● CISCO-PRODUCTS-MIB ● CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB ● CISCO-RTTMON-ICMP-MIB ● CISCO-RTTMON-IP-EXT-MIB ● CISCO-RTTMON-MIB ● CISCO-RTTMON-RTP-MIB ● CISCO-MRP-MIB | ● CISCO-SNMP-TARGET-EXT-MIB ● CISCO-STACK-MIB ● CISCO-STACKMAKER-MIB ● CISCO-STP-EXTENSIONS-MIB ● CISCO-SYSLOG-MIB ● CISCO-TCP-MIB ● CISCO-UDLDP-MIB ● CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB ● CISCO-VLAN-MEMBERSHIP-MIB ● CISCO-VTP-MIB ● ENTITY-MIB ● ETHERLIKE-MIB ● HC-RMON-MIB ● IEEE8021-PAE-MIB ● IEEE8023-LAG-MIB ● IF-MIB ● IP-FORWARD-MIB ● IP-MIB ● LLDP-EXT-MED-MIB ● LLDP-MIB ● NETRANGER ● NOTIFICATION-LOG-MIB ● OLD-CISCO-CHASSIS-MIB ● OLD-CISCO-CPU-MIB ● OLD-CISCO-FLASH-MIB ● OLD-CISCO-INTERFACES-MIB ● OLD-CISCO-IP-MIB ● OLD-CISCO-MEMORY-MIB ● OLD-CISCO-SYS-MIB< ● OLD-CISCO-SYSTEM-MIB ● OLD-CISCO-TCP-MIB ● OLD-CISCO-TS-MIB ● RMON-MIB ● RMON2-MIB ● SMON-MIB ● SNMP-COMMUNITY-MIB ● SNMP-FRAMEWORK-MIB ● SNMP-MPD-MIB ● SNMP-NOTIFICATION-MIB ● SNMP-PROXY-MIB ● SNMP-TARGET-MIB ● SNMP-USM-MIB ● SNMP-VIEW-BASED-ACM-MIB ● SNMPv2-MIB ● TCP-MIB ● UDP-MIB |
ประเภท | Industrial Switch |
---|---|
Model | Industrial Ethernet 2000 |
Switch Type | Industrial Ethernet Switches |
Switch Layer | 2 |
License / Features | LAN Base |
10/100 Ethernet Down-link Ports | 4 Port |
10/100/1000 Ethernet Down-link Ports | ไม่ |
SFP 10/100 Down-Links | ไม่ |
SFP 1G Down-Links | ไม่ |
SFP+ Down-Links | ไม่ |
SFP / SFP+ Down-Links | ไม่ |
Uplink Interfaces | 2x 1G SFP |
Switching capacity | ไม่ |
Redundant Power Supply | ไม่ |
Stack | ไม่ |
Stacking Bandwidth | ไม่ |
PoE Support | ไม่ |
Available PoE Power | ไม่ |
PoE+ 30W (IEEE 802.3at) Ports | ไม่ |
PoE 15.4W (IEEE 802.3af) Ports | ไม่ |