คุณยังไม่มีสินค้าในรถเข็น
- หน้าหลัก
- Router (เราเตอร์)
- Cisco | SL-880-AIS= Router 880 Advanced IP Services Image Feature License
![Cisco 880 Advanced IP Services Image Feature License [SL-880-AIS] ราคาถูก](https://thaiitstore.com/media/catalog/product/cache/1/image/650x/8c4c821123cacd4e53e1ea39887fc156/c/i/cisco-software-license_4.png "Cisco 880 Advanced IP Services Image Feature License [SL-880-AIS] ราคาถูก")
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco | SL-880-AIS= Router 880 Advanced IP Services Image Feature License
SKU:
SL-880-AIS=
| Band: | Cisco |
| Type: | |
| Model: | |
| Part Number: | SL-880-AIS= |
| Features: | |
| Detail: | SL-880-AIS= | Router 880 Advanced IP Services Image Feature License |
฿0.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
.
.
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
รายละเอียดสินค้า
รายละเอียด
Cisco IOS Software Features on Cisco 880 Series: Advanced IP Services Feature Set (Optional Software Upgrade)
|
Feature |
Description |
|
IP and IP services features |
● IPv4 and IPv6 Multicast
● Open Shortest Path First (OSPF)
● Border Gateway Protocol (BGP)
● Enhanced Interior Gateway Routing Protocol (EIGRP)
● Virtual Route Forwarding (VRF) Lite
● Next Hop Resolution Protocol (NHRP)
● Layer 2 Tunneling Protocol Version 3 (L2TPv3)
● Bidirectional Forwarding Detection (BFD)
● Web Cache Communication Protocol (WCCP)
|
|
Switch features |
● Internet Group Management Protocol Version 3 (IGMPv3) snooping
● 802.1x
|
|
Security features |
Secure connectivity: ● DMVPN
● Tunnel-less Group Encrypted Transport VPN
● IPsec stateful failover
● VRF-aware IPsec
● IPsec over IPv6
● Adaptive control technology
● SIP application layer gateway
Cisco IOS Firewall: ● Firewall stateful failover
● VRF-aware firewall
Content Filtering: ● Cisco Cloud Web Security connector (Subscription based)
● Cisco IOS Software black and white lists
Integrated threat control: ● IPS
● Control Plane Policing
● Flexible Packet Matching
● Network foundation protection
|
|
QoS features |
● Class-Based Weighted Random Early Detection (CBWRED)
● Network-Based Application Recognition (NBAR)
● Link fragmentation and interleaving (LFI)
● Resource Reservation Protocol (RSVP)
● Real-Time Transport Protocol (RTP) header compression (cRTP)
● Differentiated Services (DiffServ)
● QoS preclassify and prefragmentation
● Hierarchical QoS (HQoS)
|
|
Metro Ethernet features |
● Ethernet Operations, Administration, and Maintenance (Ethernet OAM)
● Ethernet Local Management Interface (Ethernet LMI)
● Hierarchial QOS (HQoS)
|
|
IPv6 features |
● IPv6 addressing architecture
● IPv6 name resolution
● IPv6 statistics
● IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-PT)
● Internet Control Message Protocol Version 6 (ICMPv6)
● IPv6 DHCP
|
|
Unified WLAN management |
Unified access-point features: ● Supported by wireless LAN controller and Cisco WCS
● Configurable local or central switching for HREAP mode
● Radio management through Cisco WCS
● Transparent roaming with Mobility Groups
|
Cisco IOS Software Features on Cisco 880V Series: Advanced IP Services Feature Set
|
Feature |
Description |
|
Cisco Voice Gateway |
4 FXS ports and 2 Basic Rate Interface (BRI) port for PBX connectivity; 1 FXO port is available on the Cisco 881V SKU |
|
Cisco Unified Communications Manager Express (Cisco UCME)/SRST version |
Ability to upgrade to 5-user license of Cisco UCME/SRST; Version 8.6 and later are supported |
|
Call-control signaling |
H.323 Versions 1, 2, 3, and 4; Media Gateway Control Protocol (MGCP) 0.1 and 1.0; Skinny Client Control Protocol (SCCP); and SIP call-control protocols are supported. |
|
ITU standard voice codecs |
G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies allowing transmission of voice across IP, are supported. The G.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecs employ lower bit rates. |
|
Cisco Unified Communications Manager support |
For SRST features for IP phones, refer to the SRST data sheet at:http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html. Cisco Unified Communications Manager support for analog and digital ports come with Releases 7.1(5), 8.5(1), and 8.6(2). |
|
Telephony interface signaling support |
Cisco 880 V supports the following signaling protocols: ● FXS loop-start and ground-start signaling
● FXO
● Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
● BRI QSIG
|
|
Voice features |
● Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
● Silence suppression and voice activity detection (VAD): Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
● Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
● Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
● Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.
|
|
Voice port-specific features |
● FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
● ISDN BRI network side and phantom power: The BRI port provides the ability to connect a private branch exchange (PBX) or private automatic branch exchange (PABX) configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
● LED indicators show voice-processing resources and port status.
|
|
Fax and modem |
● Fax and modem pass-through allows fax and modem traffic to pass through a voice port.
● Fax Relay provides a more robust protocol for fax transmission over packet networks. It also supports the T.37 and T.38 fax protocols.
|
|
High-performance flexible digital-signal-processor (DSP) architecture |
● Channel capacity: Cisco 880V supports up to four voice channels.
● Flexible DSP architecture: There is no need to specify codec complexity at configuration. An appropriate codec is dynamically selected when a call is established, while DSP resources are allocated optimally.
● Feature upgrades: The DSP architecture allows for addition of new features through simple code updates.
|
Cisco IOS Software Features on Cisco 880 SRST Series: Advanced IP Services Feature Set
|
Feature |
Description |
|
Cisco SRST version |
SRST 7.0 and later are supported. |
|
Call-control signaling |
H.323 Versions 1, 2, 3, and 4, Media Gateway Control Protocol MGCP 0.1 and 1.0, Skinny Client Control Protocol (SCCP), and SIP call-control protocols are supported. |
|
ITU standard voice codecs |
G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies allowing transmission of voice across IP, are supported. The G.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecs employ lower bit rates. |
|
Cisco Unified Communications Manager support |
For SRST features for IP phones, refer to the SRST data sheet at:http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html. Cisco Unified Communications Manager support for analog and digital ports comes with Releases 6.1(3), 7.0(2), and 7.1(3). |
|
Telephony interface signaling support |
Cisco 880 SRST supports the following signaling protocols: ● FXS loop-start and ground-start signaling
● FXO
● Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
● BRI QSIG
|
|
Voice features |
● Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
● Silence suppression and voice activity detection (VAD): Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
● Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
● Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
● Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.
|
|
Voice port-specific features |
● FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
● ISDN BRI network side and phantom power: The BRI port provides the ability to connect a private branch exchange (PBX) or private automatic branch exchange (PABX) configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
● LED indicators show voice-processing resources and port status.
|
|
Fax and modem |
● Fax and modem pass-through allows fax and modem traffic to pass through a voice port.
● Fax Relay provides a more robust protocol for fax transmission over packet networks. It also supports the T.37 and T.38 fax protocols.
|
|
High-performance flexible digital-signal-processor (DSP) architecture |
● Channel capacity: Cisco 880 SRST supports up to four voice channels.
● Flexible DSP architecture: There is no need to specify codec complexity at configuration. An appropriate codec is dynamically selected when a call is established, while DSP resources are allocated optimally.
● Feature upgrades: The DSP architecture allows for addition of new features through simple code updates.
|
Cisco IOS Software Features on Cisco 880 Series with Cisco Unified Border Element: Advanced IP Services Feature Set
|
Feature |
Description |
|
Cisco Unified Border Element version |
Cisco Unified Border Element 7.0 and later are supported. |
|
Call-control signaling |
H.323 Versions 1, 2, 3, and 4; MGCP 0.1 and 1.0; SCCP; and SIP call-control protocols are supported. |
|
ITU standard voice codecs |
G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies that allow transmission of voice across IP, are supported. The G.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecs employ lower bit rates. |
|
Cisco Unified Communications Manager support |
For SRST features for IP phones, refer to the SRST data sheet at:http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html. Cisco Unified Communications Manager support for analog and digital ports comes with Releases 6.1(3), 7.0(2), and 7.1(3). |
|
Telephony interface signaling support |
Cisco 880 SRST supports the following PSTN trunk signaling protocols: ● FXS loop-start and ground-start signaling
● FXO
● Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
● BRI QSIG
Cisco 880 Cisco Unified Border Element supports the following VoIP trunk signaling protocols: ● Up to 15 SIP-to-SIP sessions. (no H.323 support)
Note: The Cisco 880 with Cisco Unified Border Element does not include DSP feature support such as transcoding or transrating. Note: The Cisco 880 with Cisco Unified Border Element does not support concurrent operation of SRST or Cisco Unified Communications Manager Express. |
|
Voice features |
● Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
● Silence suppression and VAD: Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
● Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
● Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
● Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.
|
|
Voice port-specific features |
● FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
● ISDN BRI network side and phantom power: The BRI port provides the ability to connect a PBX or PABX configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
● LED indicators show voice-processing resources and port status.
|
ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
| ประเภท | N/A |
|---|---|
| Model | N/A |
| License / Features | N/A |
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
About Thaiitstore.com