คุณยังไม่มีสินค้าในรถเข็น
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst 9200 | C9200-NM-4X Catalyst 9200 4 x 10GE Network Module
SKU:
C9200-NM-4X
| Band: | Cisco |
| Type: | Network Modules |
| Model: | Catalyst 9200 |
| Part Number: | C9200-NM-4X |
| Features: | Cisco |
| Detail: | C9200-NM-4X | Catalyst 9200 4 x 10GE Network Module |
฿41,000.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.
.
รายละเอียดสินค้า
รายละเอียด
Catalyst 9200 Series models and configurations
|
Models |
FRU Power Supply |
FRU Fans |
Modular Uplinks |
Stacking Bandwidth Support |
SD-Access Support1 |
|
Modular uplink models (C9200 Enhanced VN SKUs) |
✓ |
✓ |
✓ |
160 Gbps |
Yes (32 Virtual Networks)2 |
|
Modular uplink models (C9200 SKUs) |
✓ |
✓ |
✓ |
160 Gbps |
Yes (4 Virtual Networks) |
|
Fixed uplink Models (C9200L SKUs) |
✓ |
✗ |
✗ |
80 Gbps |
Limited (1 Virtual Network) |
|
Compact Models (C9200CX SKUs) |
Fixed internal power supply |
Fanless |
✗ |
✗ |
Yes (16 Virtual Networks) |
1 Catalyst 9200 standalone and stack can support 25 Access Tunnels (for fabric enabled APs).
Note: Over the top fabric deployments eventually migrating to fabric wireless architecture should consider this limit during design/deployment
Note: Over the top fabric deployments eventually migrating to fabric wireless architecture should consider this limit during design/deployment
2 C9200-24PB-A, C9200-48PB-A SKUs supports 32 Virtual Networks. These SKUs cannot be stacked with C9200 SKUs with 4VNs
The Cisco Catalyst 9200 Series is made up of modular (C9200), fixed (C9200L) and compact (C9200CX) switch models.
Cisco Catalyst 9200 Series Switch configurations
|
Switch model |
Downlinks total 10/100/1000 or PoE+ copper ports |
Uplink configuration |
Default primary AC power supply |
Fans |
|
Modular uplink models |
||||
|
C9200-24T |
24 ports data |
Modular uplink options |
PWR-C6-125WAC |
FRU redundant |
|
C9200-24P |
24 ports full PoE+ |
Modular uplink options |
PWR-C6-600WAC |
FRU redundant |
|
C9200-24PB |
24 ports full PoE+ |
Modular uplink options |
PWR-C6-600WAC |
FRU redundant |
|
C9200-24PXG |
24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G) |
Modular uplink options |
PWR-C6-600WAC |
FRU redundant |
|
C9200-48T |
48 ports data |
Modular uplink options |
PWR-C6-125WAC |
FRU redundant |
|
C9200-48P |
48 ports full PoE+ |
Modular uplink options |
PWR-C6-1KWAC |
FRU redundant |
|
C9200-48PL |
48 Ports partial PoE+ |
Modular uplink options |
PWR-C6-600WAC |
FRU redundant |
|
C9200-48PB |
48 ports full PoE+ |
Modular uplink options |
PWR-C6-1KWAC |
FRU redundant |
|
C9200-48PXG |
48 ports full PoE+ (8 mGig ports up to 10G, 40 ports up to 1G) |
Modular uplink options |
PWR-C6-1KWAC |
FRU redundant |
|
Fixed uplink models |
||||
|
C9200L-24T-4G |
24 ports data |
4x 1G fixed uplinks |
PWR-C5-125WAC |
Fixed redundant |
|
C9200L-24P-4G |
24 ports full PoE+ |
4x 1G fixed uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-48T-4G |
48 ports data |
4x 1G fixed uplinks |
PWR-C5-125WAC |
Fixed redundant |
|
C9200L-48P-4G |
48 ports full POE+ |
4x 1G fixed uplinks |
PWR-C5-1KWAC |
Fixed redundant |
|
C9200L-48PL-4G |
48 Ports partial PoE+ |
4X 1G Fixed uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-24T-4X |
24 ports data |
4x 1/10G fixed uplinks |
PWR-C5-125WAC |
Fixed redundant |
|
C9200L-24P-4X |
24 ports full PoE+ |
4x 1/10G fixed uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-48T-4X |
48 ports data |
4x 1/10G fixed uplinks |
PWR-C5-125WAC |
Fixed redundant |
|
C9200L-48P-4X |
48 ports full PoE+ |
4x 1/10G fixed uplinks |
PWR-C5-1KWAC |
Fixed redundant |
|
C9200L-48PL-4X |
48 Port partial PoE+ |
4X 1/10G Fixed Uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-24PXG-4X |
24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G) |
4x 1/10G fixed uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-48PXG-4X |
48 ports full POE+ (12 mGig ports up to 10G, 36 ports up to 1G) |
4x 1/10G fixed uplinks |
PWR-C5-1KWAC |
Fixed redundant |
|
C9200L-24PXG-2Y |
24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G) |
2x 1/10/25G fixed uplinks |
PWR-C5-600WAC |
Fixed redundant |
|
C9200L-48PXG-2Y |
48 ports full POE+ (8 mGig ports up to 10G, 40 ports up to 1G) |
2x 1/10/25G fixed uplinks |
PWR-C5-1KWAC |
Fixed redundant |
|
Compact models |
||||
|
C9200CX-12T-2X2G |
12 ports data |
2x 1G copper, 1x 1G CU PD 802.3bt Class 6, 2x 10G SFP+ fixed uplinks |
80W External Power Adapter |
Fanless |
|
C9200CX-12P-2X2G |
12 ports PoE+ |
2x 1G copper, 2x 10G SFP+ fixed uplinks |
310W internal |
Fanless |
|
C9200CX-8P-2X2G |
8 ports full PoE+ |
2x 1G copper, 2x 10G SFP+ fixed uplinks |
310W internal |
Fanless |
|
C9200CX-8UXG-2X |
8 ports UPOE (4 mGig ports up to 10G, 4 ports up to 1G) |
2x 10G SFP+ fixed uplinks |
310W internal |
Fanless |
|
C9200CX-12P-2XGH |
12 ports PoE+ |
2x 1G copper, 2x 10G SFP+ fixed uplinks |
310W HVDC internal |
Fanless |
|
C9200CX-8P-2XGH |
8 ports full PoE+ |
2x 1G copper, 2x 10G SFP+ fixed uplinks |
310W HVDC internal |
Fanless |
|
C9200CX-8UXG-2XH |
8 ports UPOE (4 mGig ports up to 10G, 4 ports up to 1G) |
2x 10G SFP+ fixed uplinks |
310W HVDC internal |
Fanless |
Network modules
Cisco Catalyst 9200 Series switches come with modular or fixed uplinks as indicated in Table 1. With modular SKUs, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond. When you purchase the switch.
Cisco Catalyst 9200 Series Switch network modules
|
Network module |
Description |
|
C9200-NM-2Y1 |
2 x 25G Network Module |
|
C9200-NM-2Q1 |
2 x 40G Network Module |
|
C9200-NM-4G2 |
4x 1G network module |
|
C9200-NM-4X |
4x 1G/10G network module |
|
C9200-NM-BLANK |
No network module |
1 Supported only on C9200-24PXG, C9200-48PXG
2 Not supported on C9200-24PXG, C9200-48PXG
Power supplies
Cisco Catalyst 9200 Series switches support dual field-replaceable power supplies (Figure 3). Each switch ships with one default power supply, and a second identical power supply can be purchased with the initial order or can be added later. The second power supply can provide redundancy or additional power to PoE+ ports as needed.
Intelligent PoE+
● IEEE 802.3at PoE+ (up to 30W per port) is supported on Cisco Catalyst 9200 Series switches to lower the total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant PoE+ end devices. PoE+ removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. With Cisco Catalyst 9200 Series switches, PoE+ power allocation is dynamic, and power mapping scales up to a maximum of 1440W of PoE+ power.
● IEEE 802.3bt Class 6 and Cisco UPOE (up to 60W per port) is supported on Catalyst 9200CX Series mGig model. This facilitates delivery of network power to devices requiring higher power.
● Perpetual PoE is supported on Cisco Catalyst 9200 Series switches, and maintains the PoE+ power during a switch reload. This is important for critical endpoints such as medical devices and for Internet of Things (IoT) endpoints such as PoE-powered lights, so that there is no disruption during a switch reboot.
● Fast PoE: When power is restored to a switch, Fast PoE starts delivering power to endpoints without waiting for the operating system to fully load, thereby speeding up the time for the endpoint to start up.
Cisco Catalyst 9200 Series PoE+ Power with primary and secondary power supplies
|
Model |
Default primary power supply |
Available PoE power with single primary power supply only* |
Optional secondary power supply |
Available PoE power with additional secondary power supply* |
|
C9200-24P |
PWR-C6-600WAC |
370W |
PWR-C6-600WAC |
740W |
|
C9200-24PB |
PWR-C6-600WAC |
370W |
PWR-C6-600WAC |
740W |
|
C9200-24PXG |
PWR-C6-600WAC |
370W |
PWR-C6-600WAC |
740W |
|
C9200-48P |
PWR-C6-1KWAC |
740W |
PWR-C6-1KWAC |
1440W |
|
C9200-48PL |
PWR-C6-600WAC |
370W |
PWR-C6-600WAC |
740W |
|
C9200-48PB |
PWR-C6-1KWAC |
740W |
PWR-C6-1KWAC |
1440W |
|
C9200-48PXG |
PWR-C6-1KWAC |
740W |
PWR-C6-1KWAC |
1440W |
|
C9200L-24P-4G |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-24P-4X |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-48P-4G |
PWR-C5-1KWAC |
740W |
PWR-C5-1KWAC |
1440W |
|
C9200L-48PL-4G |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-48P-4X |
PWR-C5-1KWAC |
740W |
PWR-C5-1KWAC |
1440W |
|
C9200L-48PL-4X |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-24PXG-4X |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-48PXG-4X |
PWR-C5-1KWAC |
740W |
PWR-C5-1KWAC |
1440W |
|
C9200L-24PXG-2Y |
PWR-C5-600WAC |
370W |
PWR-C5-600WAC |
740W |
|
C9200L-48PXG-2Y |
PWR-C5-1KWAC |
740W |
PWR-C5-1KWAC |
1440W |
|
C9200CX-12P-2X2G |
310W Internal |
240W |
N/A |
N/A |
|
C9200CX-8P-2X2G |
310W internal |
240W |
N/A |
N/A |
|
C9200CX-8UXG-2X |
310W internal |
240W |
N/A |
N/A |
|
C9200CX-12P-2XGH |
310W HVDC internal |
240W |
N/A |
N/A |
|
C9200CX-8P-2XGH |
310W HVDC internal |
240W |
N/A |
N/A |
|
C9200CX-8UXG-2XH |
310W HVDC internal |
240W |
N/A |
N/A |
*Limited by port number and port rating (for example, 24 PoE+ 30W ports = 720W)
Stacking
Cisco Catalyst 9200 Series switch models are designed for stacking switches as a single virtual switch, enabling customers to have a single management plane and control plane for up to 384 access ports.
Supported stacking options
|
Model |
Stacking support |
Stacking bandwidth support |
Stacking hardware |
Number of members |
Supported stack members |
|
Modular models |
StackWise-160 |
160 Gbps |
C9200-STACK-KIT |
8 |
Other C9200 models with same license level |
|
Fixed models |
StackWise-80 |
80 Gbps |
C9200L-STACK-KIT |
8 |
Other C9200L models with same license level |
Stacking accessories
|
Model |
Description |
|
C9200-STACK-KIT |
Stack kit for C9200 SKUs only: Two data stack adapters and one data stack cable |
|
C9200L-STACK-KIT |
Stack kit for C9200L SKUs only: Two data stack adapters and one data stack cable |
|
STACK-T4-50CM |
Data stack 50 cm cable (default cable with Stack Kit) |
|
STACK-T4-1M |
Data stack 1 m cable |
|
STACK T4-3M |
Data stack 3 m cable |
Figure
Cisco Catalyst 9200 Series Switch stacked units
Fan modules
|
Model |
Description |
|
FAN-T2= |
Fan module |
Performance specifications
|
Description |
C9200 SKUs |
C9200L SKUs |
C9200CX SKUs |
|
Virtual Networks |
4 for C9200-24T, C9200-24P, C9200-48T, C9200-48P, C9200- 24PXG, C9200-48PXG, C9200-48PL 32 for C9200-24PB, C9200-48PB |
1 |
16 |
|
Stacking bandwidth |
160 Gbps |
80 Gbps |
N/A |
|
Total number of MAC addresses |
32,000 |
16,000 |
32,000 |
|
Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
11,000 (8,000 direct routes and 3,000 indirect routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
|
IPv4 routing entries |
4,000 |
3,000 |
4,000 |
|
IPv6 routing entries |
2,000 |
1,500 |
2,000 |
|
Multicast routing scale |
1,000 |
1,000 |
1,000 |
|
QoS scale entries |
1,000 |
1,000 |
1,000 |
|
ACL scale entries |
1,600 |
1,500 |
1,600 |
|
Packet buffer per SKU |
6 MB buffers for 24- or 48-port Gigabit Ethernet models, 12MB buffers for 24 or 48 port multigigabit models |
6 MB buffers for 24- or 48- port Gigabit Ethernet models, 12 MB buffers for 24 or 48 port multigigabit models |
6 MB buffers |
|
Flexible NetFlow (FNF) entries |
16,000 flows on 24- and 48-port Gigabit Ethernet models |
16,000 flows on 24- and 48- port Gigabit Ethernet models, 32,000 flows on 24 or 48 port multigigabit models |
16,000 flows |
|
DRAM |
4 GB |
2 GB |
4 GB |
|
Flash |
4 GB |
4 GB |
8 GB |
|
VLAN IDs |
4096 |
4096 |
4096 |
|
PVST Instances |
128 |
128 |
128 |
|
STP Virtual Ports |
13,000 |
13,000 |
13,000 |
|
STP Virtual Ports |
13,000 |
13,000 |
13,000 |
|
Total Switched Virtual Interfaces (SVIs) |
1000 |
512 |
1000 |
|
Jumbo frames |
9198 bytes |
9198 bytes |
9198 bytes |
|
Wireless bandwidth per switch |
Up to 48 Gbps on 24- port and 48-port Gigabit Ethernet model |
N/A |
N/A |
|
IP SGT binding scale |
8K |
10K |
8K |
|
Number of IPv4 bindings |
8K |
10K |
8K |
|
Number of SGT/DGT policies |
2K |
2K |
2K |
|
Number of SXP Sessions |
200 |
200 |
200 |
Bandwidth specifications
|
Description |
Switching capacity |
Switch capacity with Stacking |
Forwarding rate |
Forwarding rate with Stacking |
|
C9200-24T |
128 Gbps |
288 Gbps |
95.23 Mpps |
214 Mpps |
|
C9200-24P |
128 Gbps |
288 Gbps |
95.23 Mpps |
214 Mpps |
|
C9200-24PB |
128 Gbps |
288 Gbps |
95.23 Mpps |
214 Mpps |
|
C9200-24PXG |
352 Gbps |
532 Gbps |
261.90 Mpps |
395 Mpps |
|
C9200-48T |
176 Gbps |
336 Gbps |
130.95 Mpps |
250 Mpps |
|
C9200-48P |
176 Gbps |
336 Gbps |
130.95 Mpps |
250 Mpps |
|
C9200-48PL |
176 Gbps |
336 Gbps |
130.95 Mpps |
250 Mpps |
|
C9200-48PB |
176 Gbps |
336 Gbps |
130.95 Mpps |
250 Mpps |
|
C9200-48PXG |
400 Gbps |
580 Gbps |
297.61 Mpps |
431 Mpps |
|
C9200L-24T-4G |
56 Gbps |
136 Gbps |
41.66 Mpps |
101 Mpps |
|
C9200L-24P-4G |
56 Gbps |
136 Gbps |
41.66 Mpps |
101 Mpps |
|
C9200L-48T-4G |
104 Gbps |
184 Gbps |
77.38 Mpps |
137 Mpps |
|
C9200L-48P-4G |
104 Gbps |
184 Gbps |
77.38 Mpps |
137 Mpps |
|
C9200L-48PL-4G |
104 Gbps |
184 Gbps |
77.38 Mpps |
137 Mpps |
|
C9200L-24T-4X |
128 Gbps |
208 Gbps |
95.23 Mpps |
155 Mpps |
|
C9200L-24P-4X |
128 Gbps |
208 Gbps |
95.23 Mpps |
155 Mpps |
|
C9200L-48T-4X |
176 Gbps |
256 Gbps |
130.95 Mpps |
190 Mpps |
|
C9200L-48P-4X |
176 Gbps |
256 Gbps |
130.95 Mpps |
190 Mpps |
|
C9200L-48PL-4X |
176 Gbps |
256 Gbps |
130.95 Mpps |
190 Mpps |
|
C9200L-24PXG-4X |
272 Gbps |
352 Gbps |
214.28 Mpps |
262 Mpps |
|
C9200L-24PXG-2Y |
292 Gbps |
372 Gbps |
229.16 Mpps |
277 Mpps |
|
C9200L-48PXG-4X |
392 Gbps |
472 Gbps |
291.66 Mpps |
351 Mpps |
|
C9200L-48PXG-2Y |
340 Gbps |
420 Gbps |
252.97 Mpps |
313 Mpps |
|
C9200CX-12T-2X2G |
70 Gbps |
N/A |
52.08 Mpps |
N/A |
|
C9200CX-12P-2X2G |
68 Gbps |
N/A |
50.59 Mpps |
N/A |
|
C9200CX-8P-2X2G |
60 Gbps |
N/A |
44.64 Mpps |
N/A |
|
C9200CX-8UXG-2X |
128 Gbps |
N/A |
95.23 Mbps |
N/A |
|
C9200CX-12P-2XGH |
68 Gbps |
N/A |
50.59 Mpps |
N/A |
|
C9200CX-8P-2XGH |
60 Gbps |
N/A |
44.64 Mpps |
N/A |
|
C9200CX-8UXG-2XH |
128 Gbps |
N/A |
95.23 Mbps |
N/A |
* Measured with 64 byte packets
Licensing combinations
|
Licensing combinations |
Cisco DNA Advantage |
Cisco DNA Essentials |
|
Network Essentials |
No |
Yes |
|
Network Advantage |
Yes |
No* |
* At the time of license renewal, the Cisco DNA Essentials license can be purchased to be used with Network Advantage.
Cisco DNA Software subscription
Cisco DNA Software subscriptions offer a flexible way to buy software for the access domain. At each stage in the product lifecycle, Cisco DNA Software subscriptions help make buying, managing, and upgrading your network and infrastructure software easier. Cisco DNA Software subscriptions provide:
● Flexible licensing models to smoothly distribute customers’ software spending over time
● Investment protection for software purchases through software services–enabled license portability
● Lower cost of entry with the new Cisco DNA Software Subscription for Switching model
Cisco Catalyst 9200 Series switches run on Cisco IOS XE Release 16.9.2 or later. This software release includes all the features listed earlier in the Platform Software Benefits section.
Managing licenses with Smart Accounts
Creating Smart Accounts by using the Cisco Smart Software Manager (Cisco SSM) enables you to order devices and licensing packages and also manage your software licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notified of expiring add-on licenses that you want to renew.
You must order an add-on license in order to purchase a switch. When the license term expires, you can either renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to continue operating with the base license capabilities.
Both the base and add-on licenses are also available for a 90-day evaluation period. An evaluation license is activated temporarily, without purchase. An expired evaluation license cannot be reactivated after reload.
Note: It is not required to deploy Cisco DNA Center, just to use one of the above packages.
Network essentials and advantage package features
|
Features on Cisco Catalyst uplink switches |
Network Essentials |
Network Advantage |
|
Switch fundamentals Layer 2, Routed Access (RIP, EIGRP Stub, OSPF -– 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO |
✓ |
✓ |
|
Advanced switch capabilities and scale EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF |
✗ |
✓ |
|
Network segmentation VRF, VXLAN, LISP, SGT |
✗ |
✓ |
|
Automation NETCONF, RESTCONF, YANG, PnP Agent, PnP |
✓ |
✓ |
|
Telemetry and visibility Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
✓ |
✓ |
|
Security MACsec-128 (MACsec-256 on C9200CX SKUs) |
✓ |
✓ |
Cisco DNA Essentials and Advantage Package Features
|
Features |
Cisco DNA Essentials |
Cisco DNA Advantage |
|
Advanced telemetry and visibility Full Flexible NetFlow, EEM |
✓ |
✓ |
|
Optimized telemetry and visibility AVC (NBAR2) |
✗ |
✓ |
|
Day-0 network bring-up automation Cisco Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding |
✓ |
✓ |
|
Element management Discovery, inventory, topology, software image, licensing, and configuration management |
✓ |
✓ |
|
Element management Patch management |
✗ |
✓ |
|
Basic Assurance Health dashboards – Network, Client, Application; switch and wired client health monitoring |
✓ |
✓ |
|
SD-Access Policy-based automation and assurance for wired and wireless |
✗ |
✓ |
|
Network assurance and analytics Global insights, trends, compliance, custom reports; switch 360, wired client 360; fabric and non-fabric insights; app health, app 360, app performance (loss, latency, jitter) |
✗ |
✓ |
|
Cloud monitoring for Catalyst |
✓* |
✓ |
*Limited device visibility, not currently supported on C9200CX-8UXG-2X, C9200CX-12P-2XGH, C9200CX-8P-2XGH and C9200CX-8UXG-2XH
Model Mean time between failures metrics
|
Mean time between failures (hours) |
|
|
C9200-24T |
587,800 |
|
C9200-24P |
422,310 |
|
C9200-24PB |
434,220 |
|
C9200-24PXG |
353,960 |
|
C9200-48T |
571,440 |
|
C9200-48P |
375,570 |
|
C9200-48PL |
375,570 |
|
C9200-48PB |
384,980 |
|
C9200-48PXG |
320,440 |
|
C9200L-24T-4G |
531,030 |
|
C9200L-24P-4G |
392,210 |
|
C9200L-48T-4G |
508,700 |
|
C9200L-48P-4G |
347,760 |
|
C9200L-48PL-4G |
347,760 |
|
C9200L-24T-4X |
525,990 |
|
C9200L-24P-4X |
390,310 |
|
C9200L-48T-4X |
503,400 |
|
C9200L-48P-4X |
346,270 |
|
C9200L-48PL-4X |
346,270 |
|
C9200L-24PXG-4X |
379,410 |
|
C9200L-24PXG-2Y |
374,730 |
|
C9200L-48PXG-4X |
337,360 |
|
C9200L-48PXG-2Y |
337,260 |
|
C9200CX-12T-2X2G |
755,270 |
|
C9200CX-12P-2X2G |
553,140 |
|
C9200CX-8P-2X2G |
569,530 |
|
C9200CX-8UXG-2X |
TBD |
|
C9200CX-12P-2XGH |
TBD |
|
C9200CX-8P-2XGH |
TBD |
|
C9200CX-8UXG-2XH |
TBD |
|
PWR-C5-125WAC |
3,332,120 |
|
PWR-C5-600WAC |
1,600,060 |
|
PWR-C5-1KWAC |
1,600,060 |
|
PWR-C6-125WAC |
3,332,120 |
|
PWR-C6-600WAC |
1,600,060 |
|
PWR-C6-1KWAC |
1,600,060 |
ข้อมูลเพิ่มเติม
ข้อมูลเพิ่มเติม
| ประเภท | Network Modules |
|---|---|
| Model | Catalyst 9200 |
| Switch Type | LAN Core and Distribution Switches |
| Switch Layer | ไม่ |
| License / Features | Cisco |
| 10/100 Ethernet Down-link Ports | ไม่ |
| 10/100/1000 Ethernet Down-link Ports | ไม่ |
| SFP 10/100 Down-Links | ไม่ |
| SFP 1G Down-Links | ไม่ |
| SFP+ Down-Links | ไม่ |
| SFP / SFP+ Down-Links | ไม่ |
| Uplink Interfaces | ไม่ใช่ |
| Switching capacity | ไม่ |
| Redundant Power Supply | ไม่ |
| Stack | ไม่ |
| Stacking Bandwidth | ไม่ |
| PoE Support | ไม่ |
| Available PoE Power | ไม่ |
| PoE+ 30W (IEEE 802.3at) Ports | ไม่ |
| PoE 15.4W (IEEE 802.3af) Ports | ไม่ |
รีวิวสินค้า
เขียนรีวิวสินค้าของคุณเอง
About Thaiitstore.com