- หน้าหลัก
- EOL (สินค้ายกเลิกการผลิต)
- Catalyst 2960-X Switch
- Cisco Catalyst 2960-X | WS-C2960X-24TS-LL Catalyst WS-C2960X-24TS-LL 24 port 1G, 2 x 1G SFP, LAN Lite
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst 2960-X | WS-C2960X-24TS-LL Catalyst WS-C2960X-24TS-LL 24 port 1G, 2 x 1G SFP, LAN Lite
Band: | Cisco |
Type: | Switch / Hub |
Model: | Catalyst 2960-X |
Part Number: | WS-C2960X-24TS-LL |
Features: | LAN Lite |
Detail: | WS-C2960X-24TS-LL | Catalyst WS-C2960X-24TS-LL 24 port 1G, 2 x 1G SFP, LAN Lite |
-
GLC-LH-SMD SFP 1000BASE-LH, SMF, 10km Distance฿18,990.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
-
GLC-SX-MMD SFP 1000BASE-SX, MMF, 550m Distance฿9,900.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- การรับประกัน
- การจัดส่ง
- การชำระเงิน
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
Cisco Catalyst 2960-X Series PoE and PoE+ power capacity
Model |
Maximum number of PoE+ (IEEE 802.3at) ports* |
Maximum number of PoE (IEEE 802.3af) ports* |
Available PoE power (single PS source) |
Cisco Catalyst 2960X-48FPD-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
Cisco Catalyst 2960X-48LPD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
Cisco Catalyst 2960X-24PD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
Cisco Catalyst 2960X-48FPS-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
Cisco Catalyst 2960X-48LPS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
Cisco Catalyst 2960X-24PS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
Cisco Catalyst 2960X-24PSQ-L |
3 ports up to 30W |
7 ports up to 15.4W |
110W |
Cisco Catalyst 2960-X Series LAN Lite and LAN Base scalability
Resource |
LAN Lite (default) |
LAN Base (default) |
Unicast MAC addresses |
16,000 |
16,000 |
ARP Entries |
8000 |
8000 |
IPv4 unicast direct routes |
320 |
2000 |
IPv4 unicast indirect routes |
32 |
1000 |
IPv6 unicast direct routes |
256 |
2000 |
IPv6 unicast indirect routes |
0 |
1000 |
IPv4 multicast routes and IGMP groups |
1000 |
1000 |
IPv6 multicast groups |
1000 |
1000 |
IPv4 QoS ACEs |
384 |
500 |
IPv6 QoS ACEs |
256 |
500 |
IPv4 security ACEs |
256 |
600 |
IPv6 Security ACEs |
256 |
600 |
Cisco Catalyst 2960-X Series hardware
Hardware specifications |
|
Flash memory |
128 MB for LAN Base and IP Lite SKUs, 64 MB for LAN Lite SKUs |
DRAM |
512 MB for LAN Base and 256 MB for LAN Lite |
CPU |
APM86392 600 MHz dual core |
Console ports |
USB (Type B), Ethernet (RJ-45) |
Storage interface |
USB (Type A) for external flash storage |
Network management interface |
10/100 Mbps Ethernet (RJ-45) |
Cisco Catalyst 2960-X Series performance
Performance and scalability |
||
|
2960-X LAN Lite |
2960-X LAN Base |
Forwarding bandwidth |
50 Gbps |
108 Gbps |
Switching bandwidth* |
100 Gbps |
216 Gbps |
64 |
1023 |
|
4096 |
4096 |
|
9198 bytes |
9198 bytes |
|
9216 bytes |
9216 bytes |
Cisco Catalyst 2960-X Series forwarding performance
Forwarding rate: 64-byte Layer 3 packets |
|
2960-X models |
|
Cisco Catalyst 2960X-48FPD-L |
130.9 Mpps |
Cisco Catalyst 2960X-48LPD-L |
130.9 Mpps |
Cisco Catalyst 2960X-24PD-L |
95.2 Mpps |
Cisco Catalyst 2960X-48TD-L |
130.9 Mpps |
Cisco Catalyst 2960X-24TD-L |
95.2 Mpps |
Cisco Catalyst 2960X-48FPS-L |
107.1 Mpps |
Cisco Catalyst 2960X-48LPS-L |
107.1 Mpps |
Cisco Catalyst 2960X-24PS-L |
71.4 Mpps |
Cisco Catalyst 2960X-24PSQ-L |
71.4 Mpps |
Cisco Catalyst 2960X-48TS-L |
107.1 Mpps |
Cisco Catalyst 2960X-24TS-L |
71.4 Mpps |
Cisco Catalyst 2960X-48TS-LL |
104.2 Mpps |
Cisco Catalyst 2960X-24TS-LL |
68.5 Mpps |
Cisco Catalyst 2960-X Series mechanical specifications
Model |
Dimensions |
Weight |
||
Inches (H x D x W) |
Centimeters (H x D x W) |
Pounds |
Kilograms |
|
WS-C2960X-48FPD-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.9 |
5.8 |
WS-C2960X-48LPD-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.9 |
5.8 |
WS-C2960X-48TD-L |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
9.6 |
4.3 |
WS-C2960X-24PD-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.7 |
5.7 g |
WS-C2960X-24TD-L |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
8.9 |
4.0 |
WS-C2960X-48FPS-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.9 |
5.8 |
WS-C2960X-48LPS-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.9 |
5.8 |
WS-C2960X-48TS-L |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
9.4 |
4.2 |
WS-C2960X-24PS-L |
1.75 x 14.5 x 17.5 |
4.5 x 36.8 x 44.5 |
12.8 |
5.8 |
WS-C2960X-24PSQ-L |
1.73 x 11.03 x 17.5 |
4.45 x 28.0 x 44.5 |
12.8 |
5.8 |
WS-C2960X-24TS-L |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
8.9 |
4.0 |
WS-C2960X-48TS-LL |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
8.9 |
4.0 |
WS-C2960X-24TS-LL |
1.75 x 11.0 x 17.5 |
4.5 x 27.9 x 44.5 |
8.2 |
3.7 |
Cisco Catalyst 2960-X Series environmental specifications
Environmental ranges |
|||||
|
Fahrenheit |
Centigrade |
|||
Operating temperature up to 5000 ft (1500 m) |
23º to 113ºF |
-5º to 45ºC |
|||
Operating temperature up to 10,000 ft (3000 m) |
23º to 104ºF |
-5º to 40ºC |
|||
Short-term exception at sea level* |
23º to 131ºF |
-5º to 55ºC |
|||
Short-term exception up to 5000 feet (1500 m)* |
23º to 122ºF |
-5º to 50ºC |
|||
Short-term exception up to 10,000 feet (3000 m)* |
23º to 113ºF |
-5º to 45ºC |
|||
Short-term exception up to 13,000 feet (4000 m)* |
23º to 104ºF |
-5º to 40ºC |
|||
Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF |
-25º to 70ºC |
|||
|
Feet |
Meters |
|||
Operating altitude |
Up to 10,000 |
Up to 3000 |
|||
Storage altitude |
Up to 13,000 |
Up to 4000 |
|||
Operating relative humidity |
10% to 95% noncondensing |
||||
Storage relative humidity |
10% to 95% noncondensing |
||||
Acoustic noise |
|||||
Measured per ISO 7779 and declared per ISO 9296. PoE output of 185W or less where applicable. |
|||||
Bystander positions operating mode at 77°F (25°C) ambient. |
|||||
Model |
Sound pressure |
Sound power |
|||
LpA (typical) |
LpAD (maximum) |
LwA (typical) |
LwAD (maximum) |
||
Cisco Catalyst 2960X-48FPD-L Cisco Catalyst 2960X-48LPD-L Cisco Catalyst 2960X-24PD-L |
39 dB |
43 dB |
4.9 B |
5.3 B |
|
Cisco Catalyst 2960X-48TD-L Cisco Catalyst 2960X-24TD-L |
42 dB |
46 dB |
5.1 B |
5.5 B |
|
Cisco Catalyst 2960X-48FPS-L Cisco Catalyst 2960X-48LPS-L Cisco Catalyst 2960X-24PS-L |
39 dB |
43 dB |
4.9 B |
5.3 B |
|
Cisco Catalyst 2960X-24PSQ-L |
N/A |
N/A |
N/A |
N/A |
|
Cisco Catalyst 2960X-48TS-L Cisco Catalyst 2960X-24TS-L |
42 dB |
46 dB |
5.1 B |
5.5 B |
|
Cisco Catalyst 2960X-48TS-LL Cisco Catalyst 2960X-24TS-LL |
42 dB |
46 dB |
5.1 B |
5.5 B |
|
Predicted reliability |
|||||
Model |
MTBF in hours** |
||||
Cisco Catalyst 2960X-48FPD-L |
233,370 |
||||
Cisco Catalyst 2960X-48LPD-L |
277,960 |
||||
Cisco Catalyst 2960X-24PD-L |
325,780 |
||||
Cisco Catalyst 2960X-48TD-L |
445,460 |
||||
Cisco Catalyst 2960X-24TD-L |
569,520 |
||||
Cisco Catalyst 2960X-48FPS-L |
232,610 |
||||
Cisco Catalyst 2960X-48LPS-L |
276,870 |
||||
Cisco Catalyst 2960X-24PS-L |
324,280 |
||||
Cisco Catalyst 2960X-24PSQ-L |
462,680 |
||||
Cisco Catalyst 2960X-48TS-L |
442,690 |
||||
Cisco Catalyst 2960X-24TS-L |
564,910 |
||||
Cisco Catalyst 2960X-48TS-LL |
476,560 |
||||
Cisco Catalyst 2960X-24TS-LL |
622,350 |
||||
Cisco Catalyst 2960X-STACK |
17,128,090 |
||||
PWR-C2-250WAC |
1,000,000 |
||||
PWR-C2-640WAC |
1,000,000 |
||||
PWR-C2-1025WAC |
1,000,000 |
Connectors and interfaces
Connectors and interfaces |
Ethernet interfaces |
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
|
SFP and SFP+ interfaces |
For information about supported SFP and SFP+ modules, refer to the Transceiver Compatibility matrix tables at cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html. |
Indicator LEDs |
● Per-port status: Link integrity, disabled, activity, speed, and full duplex
● System status: System, RPS, stack link status, link duplex, PoE, and link speed
|
Stacking interfaces |
Cisco Catalyst 2960-X and 2960-XR Series FlexStack-Plus and FlexStack-Extended (hybrid module only) stacking cables: ● CAB-STK-E-0.5M stacking cable with a 0.5 m length
● CAB-STK-E-1M stacking cable with a 1.0 m length
● CAB-STK-E-3M stacking cable with a 3.0 m length
|
Console |
Cisco Catalyst 2960-X and 2960-XR Series console cables: ● CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
● CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
|
Power |
● The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC
● Use the supplied AC power cord to connect the AC power connector to an AC power outlet
● The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch
● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle
|
ประเภท | Switch / Hub |
---|---|
Model | Catalyst 2960-X |
Switch Type | LAN Access Switches |
Switch Layer | 2 |
License / Features | LAN Lite |
10/100 Ethernet Down-link Ports | ไม่ |
10/100/1000 Ethernet Down-link Ports | 24 Port |
SFP 10/100 Down-Links | ไม่ |
SFP 1G Down-Links | ไม่ |
SFP+ Down-Links | ไม่ |
SFP / SFP+ Down-Links | ไม่ |
Uplink Interfaces | 2x 1G SFP |
Switching capacity | 100 Gbps |
Redundant Power Supply | ไม่ |
Stack | ไม่ |
Stacking Bandwidth | ไม่ |
PoE Support | ไม่ |
Available PoE Power | ไม่ |
PoE+ 30W (IEEE 802.3at) Ports | ไม่ |
PoE 15.4W (IEEE 802.3af) Ports | ไม่ |