- หน้าหลัก
- EOL (สินค้ายกเลิกการผลิต)
- Catalyst 3650 Switch
- Cisco Catalyst 3650 | WS-C3650-48FS-L Catalyst 3650 48 Port PoE+ 775W, 4x1G SFP, LAN Base
มีบริการอุปกรณ์สำรองระหว่างซ่อมและ Onsite Services ตลอด 24 ชั่วโมง 365 วัน (ข้อมูลเพิ่มเติม คลิก...)
Cisco Catalyst 3650 | WS-C3650-48FS-L Catalyst 3650 48 Port PoE+ 775W, 4x1G SFP, LAN Base
Band: | Cisco |
Type: | Switch / Hub |
Model: | Catalyst 3650 |
Part Number: | WS-C3650-48FS-L |
Features: | LAN Base |
Detail: | WS-C3650-48FS-L | Catalyst 3650 48 Port PoE+ 775W, 4x1G SFP, LAN Base |
-
GLC-SX-MMD SFP 1000BASE-SX, MMF, 550m Distance฿9,900.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
-
GLC-LH-SMD SFP 1000BASE-LH, SMF, 10km Distance฿18,990.00 ราคายังไม่รวมภาษีมูลค่าเพิ่ม.เพิ่มไปรายการโปรด
เลือกสินค้าที่ต้องการหยิบใส่รถเข็น หรือ เลือกทั้งหมด
บทความที่เกี่ยวข้อง
- Cisco MA แบบ SMB Support (CON-SMBS) คืออะไร
- Engineer Services
- Pre-Sale Services
- ตั้งค่า COM port เพื่อ Config Cisco
- เครื่องคอมใช้ COM port อะไรตั้งค่า Cisco
- ตั้งค่า Cisco Console (Serial port) สำหรับ Config ด้วย Putty
- วิธี Download Cisco Firmware, IOS
- ติดตั้ง และตั้งค่า TFTP Server สำหรับ Cisco
- การรับประกัน
- การจัดส่ง
- การชำระเงิน
- ขั้นตอนขอเปลี่ยนอุปกรณ์ เพื่อทดแทนอุปกรณ์ที่เสีย (Hardware Replacement)
- ขั้นตอนการสมัคร CCO id
- Cisco SMARTnet vs SMBS
- Cisco DOA Warranty 90 วัน คืออะไร
Product Overview
● Integrated wireless controller capability with:
◦ Up to 40G of wireless capacity per switch (48-port models)
◦ Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)
● 24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports
● 24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE[1]
● Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight 10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports
● 24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow depth cabinets in enterprise, retail, and branch-office environments
● Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput
● Dual redundant, modular power supplies and three modular fans providing redundancy[2]
● Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy
● Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor
● Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor
● IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6
● IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time synchronization and quality of service (QoS)
● Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9, and enhanced security features
● Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features
● Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support
Cisco Catalyst 3650 Series Configurations
Models |
Fixed Uplinks |
Total 10/100/1000 Ethernet Ports |
Default AC Power Supply |
Available PoE Power |
WS-C3650-24TS |
4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP) |
24 |
250 WAC |
- |
WS-C3650-48TS |
48 |
|||
WS-C3650-24PS |
24 PoE+ |
640 WAC |
390 W |
|
WS-C3650-48PS |
48 PoE+ |
|||
WS-C3650-48FS |
48 PoE+ |
1025 WAC |
775 W |
|
WS-C3650-24TD |
2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP |
24 |
250 WAC |
|
WS-C3650-48TD |
48 |
|
|
|
WS-C3650-24PD |
24 PoE+ |
640 WAC |
390 W |
|
WS-C3650-24PDM |
24 PoE+ |
Fixed 640 WAC |
390 W |
|
WS-C3650-48PD |
48 PoE+ |
640 WAC |
390 W |
|
WS-C3650-48FD |
48 PoE+ |
1025 WAC |
775 W |
|
WS-C3650-8X24PD |
|
24 PoE+ (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
715 WAC |
435 W |
WS-C3650-12X48FD |
|
48 PoE+ (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
WS-C3650-48TQ |
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP |
48 |
250 WAC |
|
WS-C3650-48PQ |
48 PoE+ |
640 WAC |
390 W |
|
WS-C3650-48FQ |
48 PoE+ |
1025 WAC |
775 W |
|
WS-C3650-48FQM |
48 PoE+ |
Fixed 975 WAC |
775 W |
|
WS-C3650-8X24UQ |
24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
820 W |
|
WS-C3650-12X48UQ |
48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
WS-C3650-12X48UR |
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
WS-C3650-12X48UZ |
2 x 40 Gigabit Ethernet with QSFP+ |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase:
● Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP)
● Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP
● Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP
● Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP
● Two 40 Gigabit Ethernet with QSFP+
The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options.
1 and 10 Gigabit Fixed Uplink Configurations
|
Interface Options |
|
Fixed Uplink Ports |
10 Gigabit Ethernet SFP+ Ports |
Gigabit Ethernet SFP Ports |
4 x Gigabit Ethernet fixed uplink ports |
0 |
4 |
4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports |
2 |
0 |
0 |
4 |
|
2 |
2 |
|
4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports |
4 |
0 |
0 |
4 |
|
2 |
2 |
|
3 |
1 |
|
1 |
3 |
|
8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports |
8 |
0 |
0 |
8 |
|
Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports |
Dual Redundant Modular Power Supplies and External RPS2300
The Cisco Catalyst 3650 Series Switches support dual redundant power supplies (see Figure 2). The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in power supply bay 1. The switch also ships with three field-replaceable fans.
Models |
Default Power Supply |
Available PoE Power |
Support Secondary Power Supply |
24-port data switch |
PWR-C2-250WAC |
- |
Yes |
48-port data switch |
Yes |
||
24-port PoE switch |
PWR-C2-640WAC |
390 W |
Yes |
48-port PoE switch |
Yes |
||
48-port full PoE switch |
PWR-C2-1025WAC |
775 W |
Yes |
24-port mini PoE switch |
Fixed 640 WAC |
390W |
No, but supports RPS 2300 |
48-port mini PoE switch |
Fixed 975 WAC |
775W |
No, but supports RPS 2300 |
24-port Multigigabit PoE switch |
PWR-C1-715WAC |
435 W |
Yes |
24-port Multigigabit UPOE switch |
PWR-C1-1100WAC |
820 W |
Yes |
48-port Multigigabit full PoE switch |
|
|
|
48-port Multigigabit UPOE switch |
660 W |
Yes |
Available PoE with DC Power Supply
Model |
Number of DC Power Supplies |
Total Available PoE Budget |
24-port or 48-port PoE Switch (non-multigigabit) |
1 |
390 W |
2 |
780 W |
|
24-port PoE Switch (Multigigabit) |
1 |
160 W |
2 |
600 W |
|
48-port PoE Switch (Multigigabit) |
1 |
0 W |
2 |
440 W |
Power over Ethernet Plus (PoE+)
Minimum Power Supply Requirements for Full PoE and PoE+
|
24-Port PoE Switch |
48-Port PoE Switch |
PoE on All Ports |
One PWR-C2-640 WAC |
One PWR-C2-1025WAC or Two PWR-C2-640 WAC |
PoE+ on All Ports |
One PWR-C2-1025WAC or Two PWR-C2-640 WAC |
Two PWR-C2-1025 WAC |
Cisco Universal Power over Ethernet (Cisco UPOE)
Cisco UPOE is a breakthrough technology, offering the following services and benefits:
● 60W per port to enable a variety of end devices such as Samsung VDI client, BT IP turret systems in trading floors, Cisco Catalyst compact switches in retail and hospitality environments, personal Cisco TelePresence® systems, and physical access control devices
● High availability for power and guaranteed uninterrupted services, a requirement for critical
applications (e911)
● Lower OpEx by providing network resiliency at lower cost by consolidating backup power into
the wiring closet
● Faster deployment of new campus access networking infrastructures by eliminating the need for a power outlet for every endpoint
The Cisco UPOE capability is available only on select multigigabit models.
Power Supply Requirements for Cisco UPOE
|
24-Port Multigigabit Cisco UPOE Switch |
48-Port Multigigabit Cisco UPOE Switch |
Cisco UPOE (60W per port) on all |
One 1100W and one 715W power supplies or two 1100W power supplies |
Two 1100W power supplies |
Switch Performance
Cisco Catalyst 3650 Performance Specifications
Performance Numbers for All Switch Models |
|
Switching capacity |
176 Gbps on 48-port models (non-multigigabit models) 92 Gbps on 24-port models (non-multigigabit models) 254 Gbps on 24-port Multigigabit models with 2x10G uplink 272 Gbps on 24-port Multigigabit models with 4x10G uplink 392 Gbps on 48-port Multigigabit models with 4x10G uplink 472 Gbps on 48-port Multigigabit models with 8x10G uplink 472 Gbps on 48-port Multigigabit models with 2x40G uplink |
Stacking bandwidth |
160 Gbps |
Total number of MAC addresses |
32,000 |
Total number of IPv4 routes (ARP plus learned routes) |
24,000 |
FNF entries |
48,000 flow on 48-port models 24,000 flows on 24-port models |
DRAM |
4 GB |
Flash |
2 GB (non-Multigigabit models) and 4GB (Multigigabit models) |
VLAN IDs |
4,094 |
Total switched virtual interfaces (SVIs) |
1,000 |
Jumbo frame |
9198 bytes |
Total routed ports per 3650 stack |
208 |
Wireless |
|
Number of access points per switch/stack |
25 |
Number of wireless clients per switch/stack |
1000 |
Total number of WLANs per switch |
64 |
Wireless bandwidth per switch |
Up to 40 Gbps on 48-port models Up to 20 Gbps on 24-port models |
Supported Aironet access point series |
3700, 3600, 3500, 2600, 1600, 1260, 1140, 1040 |
Forwarding Rate of Switch Models |
|
Model |
Forwarding Rate |
4 x 1 Gigabit Ethernet Uplink-Models |
|
3650-24TS |
41.66 Mpps |
3650-24PS |
|
3650-48TS |
77.37 Mpps |
3650-48PS |
|
3650-48FS |
|
2 x 10 Gigabit Ethernet Uplink-Models |
|
3650-24TD 3650-24PD 3650-24PDM |
68.45 Mpps |
3650-48TD 3650-48PD 3650-48FD |
104.16 Mpps |
3650-8X24PD |
172.61 Mpps |
3650-12X48FD |
261.90 Mpps |
4 x 10 Gigabit Ethernet Uplink-Models |
|
3650-48TQ 3650-48PQ 3650-48FQ 3650-48FQM |
130.95 Mpps |
3650-8X24UQ |
202.38 Mpps |
3650-12X48UQ |
291.66 Mpps |
8 x 10 Gigabit Ethernet Uplink-Models |
|
3650-12X48UR |
351.19 Mpps |
2 x 40 QSFP+ Uplink-Models |
|
3650-12X48UZ |
351.19 Mpps |
MTBF
MTBF Hours |
||
WS-C3650-24T |
661,800 |
|
WS-C3650-24P |
528,280 |
|
WS-C3650-8X24PD |
335,930 |
|
WS-C3650-8X24UQ |
233,780 |
|
WS-C3650-24PDM |
304,860 |
|
WS-C3650-48T |
527,580 |
|
WS-C3650-48P |
383,760 |
|
WS-C3650-48F |
383,760 |
|
WS-C3650-12X48FD |
227,490 |
|
WS-C3650-12X48UQ |
203,130 |
|
WS-C3650-12X48UR |
201,680 |
|
WS-C3650-12X48UZ |
203,190 |
|
WS-C3650-48FQM |
272,260 |
|
PWR-C2-250WAC |
751,642 |
|
PWR-C2-640WAC |
693,692 |
|
PWR-C2-1025WAC |
570,259 |
|
PWR-C2-640WDC |
706,759 |
|
PWR-C1-715WAC |
664,055 |
|
PWR-C1-1100WAC |
392,174 |
|
FAN-T1 |
16,661,470 |
Connectors for Cisco Catalyst 3650 Series
Connectors
Connectors and cabling |
● 1000BASE-T ports: RJ-45 connectors, 4-pair Cat-5E UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat-5E UTP cabling
● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, DWDM and CWDM SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
● 10GBASE-SR, LR, LRM, CX1 (v02 or higher) SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
● Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling
● Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling
● Management console port: RJ-45-to-DB9 cable for PC connections
|
Power connectors |
● Customers can provide power to a switch by using the internal power. The connectors are located at the back of the switch
● Internal power supply connector: The internal power supply is an auto-ranging unit. The internal power supply supports input voltages between 100 and 240VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet
|
Management and Standards Support for Cisco Catalyst 3650 Series Switches
Standards Support for the Cisco Catalyst 3650 Series
Description |
Specification |
|
Standards |
IEEE 802.1as IEEE 802.1s IEEE 802.1w IEEE 802.11 IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.3bz IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Qat Stream Reservation Protocol IEEE 802.1Qav IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification |
RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 |
Power Supply Specifications
Power Specifications for Cisco Catalyst 3650 Series
Description |
Specification |
|
|||
|
PWR-C2-1025 WAC |
PWR-C2-640 WAC |
PWR-C2-250 WAC |
PWR-C2-640 WDC |
WS-C3650-24PDM/WS-C3650-48FQM Switches |
Power Supply Rated Maximum |
1025W |
640W |
250W |
640W |
975W |
Total Output BTU (Note: 1000 BTU per hr = 293 W) |
3497 BTU/hr, 1025W |
2183 BTU/hr, 640W |
853 BTU/hr, 250W |
2188 BTU/hr, 640W |
3326.8 BTU/hr, 975W |
Input-Voltage Range and Frequency (Note: ±10% of "Input-Voltage Range”) |
115-240VAC, 50-60 Hz |
100-240VAC, 50-60 Hz |
100-240VAC, 50-60 Hz |
-36VDC to -72VDC |
100-240VAC, 50-60 Hz |
Input Current |
12-6A |
8-4A |
4-2A |
21 - 10.5 A |
12-5A |
Output Ratings |
12V @ 20.83A -54V @ 14.6A |
12V @ 20.83A -54V @ 7.36A |
12V @ 20.83A |
12V @ 20.83A -54V @ 7.36A |
12V @ 16.66A -54V @ 14.3A |
Output Holdup Time |
10 ms minimum @ 102.5VAC |
16.7 ms minimum @ 100VAC |
16.7 ms minimum @ 100VAC |
2ms@-48VDC |
20 ms minimum @ 100VAC |
Power-Supply Input Receptacles |
IEC 320-C16 (IEC60320-C16) |
IEC 320-C16 (IEC60320-C16) |
IEC 320-C13 (IEC60320-C13) |
Terminal strip |
IEC 320-C16 (IEC60320-C16) |
Power Cord Rating |
13A |
13A |
10A |
20A @ 100VDC |
15A |
Physical Specifications |
(H x W x D): 1.58 X 3.75 X 13.25 in (4.0 x 9.5 x 33.7 cm) Weight: 3.55 lb (1.61 kg) |
(H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 3.1 lb (1.41 kg) |
(H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 2.55 lb (1.16 kg) |
H x W x D): 1.58 X 3.75 X 11.75 in (4.0 x 9.5 x 29.8 cm) Weight: 2.75 lb (1.25 kg) |
N/A |
Operating Temperature |
For the operating temperature ranges at various altitudes of AC and DC power supply module powered switches, see Table 1. |
||||
Storage Temperature |
-40 to 158°F (-40 to 70°C) |
||||
Relative Humidity Operating and Nonoperating Noncondensing |
5 to 96% noncondensing |
5 to 95% noncondensing |
|||
Altitude |
16,400 ft. (5,000 meters) |
10,000 ft. (3,000 meters) |
|||
MTBF |
Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Issue 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level). |
||||
EMI and EMC Compliance |
“AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK |
||||
Safety Compliance |
For the operating temperature ranges at various altitudes of AC and DC power supply module powered switches, see Table 1. |
||||
LED Indicators |
-40 to 158°F (-40 to 70°C) |
N/A |
Description |
Specification |
|
|
PWR-C1-1100WAC |
PWR-C1-715WAC |
Power supply rated maximum |
1100W |
715W |
Total output BTU (Note: 1000 BTU/hr = 293W) |
3793 BTU/hr, 1100W |
2465 BTU/hr, 715W |
Input-voltage range and frequency |
115-240VAC, 50-60 Hz |
100-240VAC, 50-60 Hz |
Input current |
12-6A |
10-5A |
Output ratings |
-56V at 19.64A |
-56V at 12.8A |
Output holdup time |
10 ms minimum at 102.5VAC |
16.7 ms minimum at 100VAC |
Power-supply input receptacles |
IEC 320-C16 (IEC60320-C16) |
IEC 320-C16 (IEC60320-C16) |
Power cord rating |
13A |
13A |
Physical specifications |
(H x W x D): 1.58 X 3.25 X 13.7 in Weight: 3 lb (1.4 kg) |
(H x W x D): 1.58 X 3.25 X 12.20 in Weight: 2.8 lb (1.3 kg) |
Operating temperature |
23 to 113°F (-5 to 45°C) |
|
Storage temperature |
-40 to 158°F (-40 to 70°C) |
|
Relative humidity operating and nonoperating noncondensing |
5 to 90% noncondensing |
|
Altitude |
10,000 ft. (3000 meters), up to 45°C |
|
MTBF |
Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level). |
|
EMI and EMC compliance |
FCC Part 15 (CFR 47) Class A ICES-003 Class A EN 55022 Class A CISPR 22 Class A AS/NZS 3548 Class A BSMI Class A (AC input models only) VCCI Class A EN 55024, EN300386, EN 50082-1, EN 61000-3-2, EN 61000-3-3 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1 |
|
Safety compliance |
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking |
|
LED indicators |
“AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK |
Power Consumptions (in Watts) of Standalone Cisco Catalyst 3650 Series
Model |
Fixed Uplink |
Power Consumption (Watts) (No More Than) |
|||
0% Traffic |
10% Traffic |
100% Traffic |
Weighted Average |
||
WS-C3650-24TS |
4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) |
43.9 |
56.4 |
57.1 |
55.21 |
WS-C3650-48TS |
61.1 |
85.1 |
86.4 |
82.85 |
|
WS-C3650-24PS |
53.8 |
65.3 |
65.9 |
64.18 |
|
WS-C3650-48PS |
81.4 |
98.7 |
99.5 |
97.09 |
|
WS-C3650-48FS |
90.8 |
108.7 |
109.4 |
106.98 |
|
WS-C3650-24TD |
2 x 10 Gigabit Ethernet with SFP+ and 2 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP |
54.0 |
60.8 |
63.0 |
60.35 |
WS-C3650-48TD |
73.3 |
90.9 |
93.9 |
89.40 |
|
WS-C3650-24PD |
61.1 |
68.3 |
70.1 |
67.75 |
|
WS-C3650-24PDM |
63.8 |
72.3 |
76.2 |
71.9 |
|
WS-C3650-48PD |
80.3 |
99.1 |
101.5 |
97.45 |
|
WS-C3650-48FD |
88.8 |
106.5 |
109.4 |
105.03 |
|
WS-C3650-8X24PD |
103 |
107.8 |
111.5 |
107.7 |
|
WS-C3650-12X48FD |
158.7 |
168.6 |
172.7 |
168 |
|
WS-C3650-48TQ |
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP |
73.0 |
91.9 |
96.7 |
90.47 |
WS-C3650-48PQ |
86.4 |
103.4 |
107.4 |
102.10 |
|
WS-C3650-48FQ |
96.6 |
116.2 |
120.5 |
114.69 |
|
WS-C3650-48FQM |
74.1 |
89.2 |
95.8 |
88.4 |
|
WS-C3650-8X24UQ |
110.0 |
115.3 |
123.3 |
115.6 |
|
WS-C3650-12X48UQ |
170.4 |
179.9 |
186.6 |
179.7 |
|
WS-C3650-12X48UR |
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP |
174.5 |
184.9 |
195.7 |
184.9 |
WS-C3650-12X48UZ |
2 x 40 Gigabit Ethernet with Quad Small Form-Factor Pluggable+ (QSFP+) |
162.4 |
173.7 |
184.0 |
173.6 |
Safety and Compliance Information for Cisco Catalyst 3650 Series
Description |
Specification |
Safety Certifications |
UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1 Second Edition GOST NOM (obtained by partners and distributors) |
Electromagnetic Emissions Certifications |
47CFR Part 15 (CFR 47) Class A (FCC Part 15 Class A) AS/NZS CISPR22 Class A CISPR22 Class A EN55022 Class A ICES003 Class A VCCI Class A EN61000-3-2 EN61000-3-3 KN22 Class A KCC CNS13438 Class A EN55024 CISPR24 KN24 |
Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
Noise Specifications |
Office Product Spec: 48dBA at 25°C (refer to ISO 7779) |
Telco |
Common Language Equipment Identifier (CLEI) Code |
Licensing
Licensing for Cisco Catalyst 3650 Series Switches
The three feature sets available with all Cisco Catalyst 3650 Series Switches are:
● LAN Base: Enterprise access layer 2 switching features
● IP Base: Enterprise access layer 3 switching features
● IP Services: Advanced enterprise layer 3 switching (IPv4 and IPv6) features
The LAN Base feature set offers enhanced intelligent services that include comprehensive Layer 2 features, with up to 255 VLANs. The IP Base feature set provides entry-level enterprise services in addition to all LAN Base features, with 4094 VLANs. IP Base also includes the support for wireless controller functionality (mobility agent and mobility controller role; additional access point license required for mobility controller role), routed access, smart operations, FNF, and so on. The IP Services feature set provides full enterprise services that include advanced Layer 3 features such as EIGRP, OSPF, BGP, PIM, and IPv6 routing such as OSPFv3 and EIGRPv6. All software feature sets support advanced security and MQC-based QoS.
The Cisco Catalyst 3650 Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3650 Series LAN Base switches. The same applies to IP Base and IP Services as well. A mixed stack of LAN Base switch with IP Base or IP Services feature set is not supported.
Customers can transparently upgrade the software feature set in the Cisco Catalyst 3650 Series Switches through Cisco IOS Software CLI using the right to use (RTU)-based software upgrade process. Software activation enables the Cisco IOS Software feature sets. Based on the license’s type, Cisco IOS Software activates the appropriate feature set. License types can be changed, or upgraded, to activate a different feature set.
Access Point License for Cisco Catalyst 3650
An access point license is required for Cisco Catalyst 3650 operating in mobility controller mode. No access point license is required for 3650 operating in mobility agent mode. This functionality is included in the IP Base feature set. Other devices that can act as mobility controller are the WLC 5760, WLC 5508, and WiSM2 wireless controllers. Access point licenses can be transferred only between two 3650 switches or between 3650 and 5760 controller and vice versa.
Software Policy for Cisco Catalyst 3650 Series Switches
Customers with Cisco Catalyst LAN Base and IP Base software feature sets will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier. Customers with licenses for our IP Services software images require a service support contract such as Cisco Smart Net Total Care™ Service to download updates. This policy supersedes any previous warranty or software statement and is subject to change without notice.
ประเภท | Switch / Hub |
---|---|
Model | Catalyst 3650 |
Switch Type | LAN Core and Distribution Switches |
Switch Layer | 3 |
License / Features | LAN Base |
10/100 Ethernet Down-link Ports | N/A |
10/100/1000 Ethernet Down-link Ports | N/A |
SFP 10/100 Down-Links | N/A |
SFP 1G Down-Links | N/A |
SFP+ Down-Links | N/A |
SFP / SFP+ Down-Links | N/A |
Uplink Interfaces | N/A |
Switching capacity | N/A |
Redundant Power Supply | N/A |
Stack | N/A |
Stacking Bandwidth | N/A |
PoE Support | N/A |
Available PoE Power | N/A |
PoE+ 30W (IEEE 802.3at) Ports | N/A |
PoE 15.4W (IEEE 802.3af) Ports | N/A |